IL PORTALE per la RICERCA dei DIPARTIMENTI

Chiara Ramella (2012) "3.5 GHz WiMAX GaN Doherty Power Amplifier with 2nd harmonic tuning"

Gamba A. (2012) "A Bistable Model of Cell Polarity"

Ferraris M (2012) "A Brazilian Disk Test for the Evaluation of the Shear Strength of Epoxy-Joined Ceramics"

G. Barbero (2012) "A Poisson–Boltzmann description for the double-layer capacitance of an electrolytic cell"

G. Migliavacca, F. Aimone, A. Ferri, S. Sicardi (2012) "A comparison of analytical methods for the quantificationof a reactive b-cyclodextrin fixed onto cotton yarns"

Daniele L. Marchisio (2012) "A computational fluid dynamics study of supercritical antisolvent precipitation. Mixing effects on particle size"

Fissore D., Pisano R., Barresi A. A. (2012) "A model-based framework to optimize pharmaceuticals freeze drying"

Kaniadakis G. (2012) "A new model of income distribution: the ¿-generalized distribution"

Marchisio D.L. (2012) "A new quadrature-based moment method for the mixing of inert polydisperse fluidized powders in commercial CFD codes"

Gliozzi A.S. (2012) "A novel approach to the analysis of human growth"

Frascella F., Ricciardi S., Rivolo P., Mandracci P., Giorgis F., Descrovi E. (2012) "A polymer-based functional pattern on onedimensional photonic crystals for photon sorting of fluorescence radiation"

Risplendi F., Cicero G. (2012) "A quantum-mechanical study of the adsorption of prototype dye molecules on rutile-TiO2(110): a comparison between catechol and isonicotinic acid"

Qiuling Chen, Qiuping Chen (2012) "Accurate Faraday measurement system forPBB glasses in current transducer application"

M. Sangermano (2012) "Advances in Cationic Photopolymerization"

Kaniadakis G. (2012) "Advances in Modern Condensed Matter Physics"

Kaniadakis G. (2012) "Advances in Modern Statistical Mechanics"

Bensaid S., Deorsola F.A., Fino D., Russo N. (2012) "After-treatment of household wood-fired stove emissions: from catalyst formulation to full-scale system"

M. Rosso (2012) "Aluminium based components with enhanced characteristics through advanced squeeze casting process"

M. Piumetti, M. Armandi, B. Bonelli (2012) "An IR spectroscopy assessment of the surface acidity of mesoporous VOx-SiO2 catalysts"

A.C. Sparavigna (2012) "An ancient rangefinder for teaching surveying methods"

A. Lamberti, E. Tresso, P. Mandracci, C.F. Pirri (2012) "An easy method for the room-temperature growth of spongelike nanostructured Zn films as initial step for the fabrication of nanostructured ZnO"

Angelini E., Grassini S. (2012) "An in situ investigation of the corrosion behaviour of a weathering steel work of art"

Actis Grande M. (2012) "Analysis and Assessment of Powder Metallurgy Techniques for Armor Elements Production"

Boetti N.G., Chen Qiuling, Chen Qiuping, Milanese D. (2012) "Analysis of Faraday effect in multimode tellurite glass optical fiber for magneto-optical sensing and monitoring applications"

Smeacetto F. (2012) "Analysis of the thermal field of a seal-less planar solid oxide fuel cell"

Faraldi F., Grassini S. (2012) "Analytical methodologies for the investigation of soil-induced degradation of Cu-based archaeological artefacts"

Balagna C., Perero S., Ferraris S., Vernè E., Ferraris M. (2012) "Antibacterial coating on polymer for space application"

Chiara Vitale-Brovarone, Enrica Verné (2012) "Antibiotico loading on bioactive glasses and glass-ceramics: an approach to surface modification"

Ferrero F., Periolatto M. (2012) "Antimicrobial Finish of Textiles by Chitosan UV-Curing"

PERIOLATTO M., FERRERO F. (2012) "Antimicrobial chitosan finish of cotton and silk fabrics by UV-curing with 2-hydroxy-2-methylphenylpropane-1-one"

Chiampo F. (2012) "Application of the IPCC model to a Brazilian landfill: first results"

Destro M., Gerbaldi C., Penazzi N. (2012) "Aqueous processing of cellulose based paper-anodes for flexible Li-ion batteries"

M. Agnello (2012) "Beam and SKS spectrometers at the K1.8 beam line"

Vitale Brovarone C., Baino F. Tallia F. Gervasio C, Verné E (2012) "Bioactive glass-derived trabecular coating: a smart solution for enhancing osteointegration of prosthetic elements"

Baino F., Vitale Brovarone C. (2012) "Bioactive glass/polymer composite scaffolds mimicking bone tissue"

Pagliano C (2012) "Biomimetic soluble collagen purified from bones"

Baino F., Vitale-Brovarone C. (2012) "Bioresorbable glass effect on the physico-chemical properties of bilayered scaffolds for osteochondral regeneration"

Trigiante M. (2012) "Black hole solutions to the F4-model and their orbits (I)"

Frascella F., Mandracci P., Giorgis F., Descrovi E. (2012) "Bloch surface waves-controlled fluorescence emission: coupling into nanometer-sized polymeric waveguides"

Scalerandi M., Gliozzi A.S. (2012) "Break of reciprocity principle due to localized nonlinearities in concrete"

M. Armandi, B. Bonelli (2012) "CO2 adsorption on Aluminosilicate Single-Walled Nanotubes of Imogolite Type"

M. ROSSO (2012) "CONTINUOS CASTING AND ROLLING FOR THE MANUFACTURING OF THIN AL SHEETS"

Ugues D. (2012) "Caratterizzazione ad usura di rivestimentiPVD con e senza laser texturing"

JAGDALE P (2012) "Carbon Nano Material Synthesis from Polyethylene by Chemical Vapour Deposition,"

M. Giorcelli, A. Tagliaferro (2012) "Carbon nanotubes with different orientations for personalized therapy"

M. Sangermano (2012) "Cationic photocured epoxy nanocomposites filled with different carbon fillers"

Zecchina R. (2012) "Cavity approach to sphere packing in Hamming space"

Balagna C., Spriano S. (2012) "Characterization of Co-Cr-Mo alloys after a thermal treatment for high wear resistance"

Federico Smeacetto, Milena Salvo, Monica Ferraris (2012) "Characterization of New Glass Coated Foam GlassInsulating Tiles by Standard Tests"

Pagliano C., Saracco G., Barber J. (2012) "Characterization of PSII-LHCII supercomplexes isolated from pea thylakoid membranes by one-step treatment with a- and ß- dodecyl-D-maltoside."

L. Scaltrito, E. Tresso, C.F. Pirri (2012) "Characterization of photovoltaic modules for low-power indoor application"

Lavagno A. (2012) "Chemical and mechanical instability in warm and dense nuclear matter"

Virga A., Tagliaferro A. (2012) "Chemico-physical characterisation and in vivo biocompatibility assessment of DLC-coated coronary stents"

Pagliano C. (2012) "Chloroplast ultrastructure and thylakoid polypeptide composition are affected by different salt concentrations in the halophytic plant Arthrocnemum macrostachyum."

Giovanni Barbero (2012) "Cholesteric pitch-transitions induced by a magnetic field in a sample containing incomplete number of pitches"

Simone Zanarini, Svetoslava Vankova, Marco Armandi, Barbara Bonelli, Barbara Onida (2012) "CoAPO5 as a water oxidation catalyst and a light sensitizer"

L. Dall'Asta (2012) "Collaboration in social networks"

Gliozzi A.S. (2012) "Comparison between PUN and Tofts models in the quantification of dynamic contrast-enhanced MR imaging"

Pagliano C., Saracco G., Barber J. (2012) "Comparison of the a and ß isomeric forms of the detergent n-dodecyl-D-maltoside for solubilizing photosynthetic complexes from pea thylakoid membranes."

Giorcelli M., Tagliaferro A. (2012) "Comparison of two Different Carbon Nanotube-Based Surfaces with Respect to Potassium Ferricyanide Electrochemistry"

G. Barbero (2012) "Comparison of two generation-recombination terms in the Poisson-Nernst-Planck model"

A. Carbone (2012) "Complexity Aided Design"

Stefano Stassi (2012) "Confinement in Oriented Mesopores Induces Piezoelectric Behavior of Polymeric Nanowires"

A. Lamberti, E. Tresso, C.F. Pirri (2012) "Coral-shaped ZnO nanostructures for Dye Sensitized Solar Cell photoanodes"

Actis Grande M. (2012) "Correlation between Microstructure/Fracture Surfaces and Material Properties"

Badini C., Biamino S., Pavese M., Fino P. (2012) "Corrosion behaviour of SiC laminate under decomposed sulphuric acid at 850 °C"

Pavese M., Biamino S., Tulliani JM., Marino F., Fino P. (2012) "Cost effective glassy carbon brake pads solution for automotive systems"

Alongi J., Malucelli G. (2012) "Cotton fabrics treated with novel oxidic phases acting as effective smoke suppressants"

Palmero P., Montanaro L. (2012) "Creep behaviour of alumina/YAG composites prepared by different sintering routes"

Gamba A. (2012) "Critical behavior and axis defining symmetry breaking in Hydra embryonic development"

Candido Pirri (2012) "Current and Future Nanotech Applications in the Oil Industry"

Alongi J., Frache A., Malucelli G. (2012) "Cyclodextrin nanosponges as novel green flame retardants for PP, LLDPE and PA6"

Angelini E., Faraldi F., Grassini S. (2012) "Degradation mechanisms occurring in precious metallic artefacts"

Scalerandi M., Gliozzi A. S. (2012) "Detection and location of cracks using loss of reciprocity in ultrasonic waves propagation"

G. Malucelli (2012) "Dielectric study of low glass transition temperature cycloaliphatic UV-curable epoxy networks"

Sanfilippo S., Ruggeri B., Fino D. (2012) "Dietary vs. transport: an analysis of environmental burderns pertaing to a typical workday"

P. Palmero, L. Montanaro (2012) "Differentiation of osteoblast and osteoclast precursors on pure and silicon-substituted synthesized hydroxyapatites"

S. BENSAID, D. FINO (2012) "Direct Liquefaction of Ligno-Cellulosic Residues for Liquid Fuel Production"

Descrovi E. (2012) "Direct comparison of the performance of Bloch surface wave and surface plasmon polariton sensors"

Armandi M., Bonelli B. (2012) "Direct coupling of H2 production through a high pressure PEM electrolyzer and its storage by physisorption on microporous materials"

Virga A., Rivolo P., Geobaldo F., Giorgis F. (2012) "Direct patterning of silver particles on porous silicon by inkjet printing of a silver salt via in-situ reduction"

Ambra Caprile (2012) "Domain Wall Processes, Rotations, and High-Frequency Losses in Thin Laminations"

Smeacetto F., Salvo M., Rizzo S., Ferraris M. (2012) "Durable Glass-Ceramic Coatings for Foam Glass"

Bernardo Ruggeri, Sara Sanfilippo (2012) "ENERGY VALORIZATION OF RESIDUES OF DARK ANAEROBIC PRODUCTION OF hYDROGEN"

A. ROSSANI (2012) "EXCITON-CATALYZED RECOMBINATION-GENERATION OF ELECTRONS AND HOLES IN SEMICONDUCTORS: A KINETIC APPROACH"

Fino D. (2012) "Eco-efficient waste glass recycling: integrated waste management and green product development through LCA"

Qiuping Chen, Qiuling Chen, Monica Ferraris (2012) "Effect of Ceramic Crucibles on Magneto-OpticalPbO-Bi2O3-B2O3 Glasses Properties"

Cicero G. (2012) "Effect of nitrogen impurities on the physical properties of ZnO nanowires: First-principles study"

Rosalbino F. (2012) "Effect of silicon and germanium alloying additions on the passivationcharacteristics of Fe3 Al intermetallic in sulphuric acid solution"

Ferraris M., Ferraris S., Perero S., Balagna C., Vernè E. (2012) "Effect of thermal treatments on sputtered silver nanocluster/ silica composite coatings on soda-lime glasses: ionic exchange and antibacterial activity"

M. Piumetti, B. Bonelli, M. Armandi (2012) "Effect of vanadium dispersion and of support properties on the catalytic activity of V-containing silicas"

Pelizzola A. (2012) "Effects of confinement on thermal stability and folding kinetics in a simple Ising-like model"

DAGHERO D, TORTELLO M, UMMARINO G A, GONNELLI R S (2012) "Effects of isoelectronic Ru substitution at the Fe site on the energy gaps of optimally F-doped SmFeAsO"

Ferraris M, Casalegno V, Rizzo S, Salvo M (2012) "Effects of neutron irradiation on glass ceramics as pressure-less joining materials for SiC based components for nuclear applications"

Sara Ferraris, Enrica Vernè, Silvia Spriano (2012) "Effects of sterilization and storage on the properties of ALP-grafted biomaterials for prosthetic and bone tissue engineering applications"

Scalerandi M. (2012) "Effects of transducer size on impedance spectroscopy measurements"

Ruggeri B. (2012) "Efficiency and efficacy of pre-treatment and bioreaction forbio-H2 energy production from organic waste"

Palmero P., Lombardi M. (2012) "Elaboration and mechanical characterization of multi-phase alumina-based ultra-fine composites"

Antonio S. Gliozzi (2012) "Elastic response to temperature variations in granular media: A phenomenological analysis"

Lamberti A., Tresso E., Pirri C. F. (2012) "Electric characterization and modeling of microfluidic-based dye sensitized solar cell"

Tulliani J.M. (2012) "Electrical characterization of room temperature humidity sensors in La0.8Sr0.2Fe1xCuxO3 (x = 0, 0.05, 0.10)"

Barbero G., Cicero G., Pirri C. F. (2012) "Electrical response of electrolytic cells limited by different types of electrodes"

Carbone A. (2012) "Electrical transport and noise in polyacene semiconductors"

F. Rosalbino, E. Angelini (2012) "Electrochemical corrosion behaviour of Sn–Ag–Cu (SAC) eutectic alloy in a chloride containing environment"

F. Rosalbino, G. Scavino (2012) "Electrochemical corrosion behaviour of innovative mould steels in a chloride-containing environment "

Rosalbino F., Scavino G. (2012) "Electrochemical corrosion response of a precipitation hardening moulds steel in a NaCl solution"

Zeng J., Francia C., Monteverde Videla A.H.A., Specchia S. (2012) "Electrochemical performance of Pt-based catalysts supported on different ordered mesoporous carbons (Pt/OMCs) for oxygen reduction reaction"

M. Terner, S. Biamino, P. Fino, M. Pavese, C. Badini (2012) "Electron Beam Melting of high niobium containing TiAl alloy: feasibility investigation"

MIlanese D., Scarpignato G.C. (2012) "Energy transfer and energy level decay processes in Tm3+-doped tellurite glass"

M. Periolatto (2012) "Enhanced adhesion of conductive coating on plasma-treated polyester fabric: A study on the ageing effect"

D. L. Marchisio, S. Bensaid, D. Fino (2012) "Enzymatic Hydrolysis of Lignocellulosic Biomasses via CFD and Experiments"

Boetti N.G., Venturello A., Milanese D. (2012) "Er3+ and Ce3+ Co-Doped Tellurite Optical Fiber for Lasers And Amplifiers in the Near Infrared Wavelength Region: Fabrication, Optical Characterization and Prospects"

Alongi J., Frache A. (2012) "Evaluation of Nonconventional Additives as FR on Polyamide 6,6: Phosphorous-Based Masterbach, a-Zirconium Dihydrogen Phosphate and ß-Cyclodextrin-Based Nanosponges"

S. Stassi, S.L. Marasso, C.F. Pirri (2012) "Evaluation of different conductive nanostructured particles as filler in smart piezoresistive composites"

Agnello M. (2012) "Evidence for Heavy Hyperhydrogen H-6(Lambda)"

Trigiante M. (2012) "Evidence for a Family of SO(8) Gauged Supergravity Theories"

Baino F. (2012) "Evidences of glass-ceramic white opaque tesserae from Roman age: a thermo-analytical approach"

D. Firrao (2012) "Experimental Investigation of Microstructural and Mechanical Properties of New Steels for Large Blooms"

Lombardi M., Fino P., Malucelli G., Montanaro L. (2012) "Exploring composites based on PPO blend as ablative thermal protection systems – Part I: The role of layered fillers"

Fino P., Lombardi M., Malucelli G., Montanaro L. (2012) "Exploring composites based on PPO blend as ablative thermal protection systems – Part II: The role of equiaxial fillers"

Qiuping Chen, Qiuling Chen (2012) "Fabrication of microfluidics structures on different glasses by simplified imprinting technique"

Qiuling Chen, Qiuping Chen, Sergio Ferrero, Luciano Scaltrito (2012) "Fabrication of microstructures on different materials by diode-pumped solid state laser writing for microfluidics applications"

Qiuling Chen, Qiuping Chen, Sergio Ferrero, Luciano Scaltrito (2012) "Fabrication of microstructures on glass by imprinting in conventional furnace for lab-on-chip application"

Biamino S., Fino P., Badini C. (2012) "Fabrication of short carbon ¿bre reinforced SiC multilayer composites by tape casting"

Lamberti A., Destro M., Pirri C.F., Gerbaldi C. (2012) "Facile fabrication of cuprous oxide nanocomposite anode films for flexible Li-ion batteries via thermal oxidation"

Trigiante M. (2012) "Fake supersymmetry versus Hamilton-Jacobi"

Gozzelino L., Gerbaldo R., Ghigo G. (2012) "Fast neutron irradiation of high-Tc superconducting materials engineered for magnetic field and THz photon detection"

A. Venturello, F. Geobaldo (2012) "Fast non-destructive determination of chlorophylls in apple skin"

P. Matteis, G. Scavino, D. Firrao (2012) "Fatigue behavior of dual-phase and TWIP steels for lightweight automotive structures"

UMMARINO G.A. (2012) "Feedback Effect in Iron Pnictide Superconductors"

M. Agnello (2012) "First observation of the hyper superheavy hydrogen H-6(Lambda)"

Demichela M. (2012) "Five dead and five injured in a dimethyl terephthalate plant accident: Serious errors in the plant design coupled with incorrect maintenance management"

Luca Dall'Asta (2012) "Fixation and escape times in stochastic game learning"

Alessandro Pelizzola (2012) "Folding transitions in three-dimensional space with defects"

Fissore D. (2012) "Freeze-drying modeling and monitoring using a new neuro-evolutive technique"

FERRERO F., PERIOLATTO M. (2012) "Functionalized fibrous materials for the removal of dyes"

Grassini S. (2012) "Gas monitoring in RPC by means of non-invasive plasma coated POF sensors"

Actis Grande M. (2012) "Geometrical and microhardness aspects of studied aluminium PM Al-Mg-Si-Cu-Fe and Al-Zn-Mg-Cu-Sn alloys in relation to local plastic deformation"

FERRERO F., PERIOLATTO M. (2012) "Glycerol in comparison with ethanol in alcohol-assisted dyeing"

Onida B. (2012) "Gold-assisted E' centres formation on the silica surface of Au/SBA-15 catalysts for low temperature CO oxidation"

Lavagno A. (2012) "Hadronic matter at finite temperature and density within aneffective relativistic mean field model"

Barletta L., Russo N., Fino D. (2012) "Heavy metal removal by means of electrocoagulation using Aluminum electrodes for drinking water purification"

Bonelli B. (2012) "Hematite nanoparticles larger than 90 nm show no sign of toxicity in terms of lactate dehydrogenase release, nitric oxide generation, apoptosis and comet assay in murine alveolar macrophages and human lung epithelial cells."

Bensaid S., Specchia S. (2012) "High efficiency Thermo-Electric power generator"

Lamberti A., Tresso E. (2012) "High efficiency dye-sensitized solar cells exploiting sponge-like ZnO nanostructures"

Pirone R. (2012) "High-Pressure Methane Combustion over a Perovskyte Catalyst"

Sangermano M, Grassini S (2012) "Hybrid UV-cured organic-inorganic IPNs"

G. Colucci, M. Sangermano (2012) "Hybrid organic-inorganic silicate/thiol-ene photocured coatings"

Alongi J., Malucelli G. (2012) "Hybrid phosphorus-doped silica architectures derived from a multistep sol-gel process for improving thermal stability and flame retardancy of cotton fabrics"

Reza Moghadam Esfahani (2012) "Hydrogen-Rich Gas Production from Palm Kernel Shell by Applying Air Gasification in Fluidized Bed Reactor"

Descrovi E, Giorgis F, Mandracci P (2012) "Hydrogenated amorphous silicon nitride photonic crystals for improved-performance surface electromagnetic wave biosensors"

Agnello M. (2012) "Hypernuclear weak decay studies with FINUDA"

Alberto Fina (2012) "Ignition of polypropylene/montmorillonite nanocomposites"

M. Sangermano (2012) "Impact resistance enhancement by adding epoxy ended hyperbranched polyester to DGEBA photocured thermosets"

N.G.BOETTI, D.MILANESE (2012) "Improved setup and procedure for benchmarking of photodarkening in Ytterbium doped silica fibers"

M. Giorcelli, A. Tagliaferro (2012) "Improving the signal-to-noise ratio of an ECL-based sensor using ad hoc carbon nanotube electrodes"

Doglione R. (2012) "In Situ Investigations on the Ductility of an Al-Si-Mg Casting Alloy"

M. Sangermano (2012) "In situ synthesis of Ag-acrylic nanocomposites: tomography-based percolation model, irreversible photoinduced electromigration and reversible electromigration"

Rosalbino F., Scavino G. (2012) "In vitro corrosion behaviour of Ti–Nb–Sn shape memory alloys in Ringer’sphysiological solution"

M. Sangermano (2012) "In-situ graphene oxide reduction during UV-photopolymerization of graphene oxide/acrylic resins mixtures"

Firrao D., Matteis P. (2012) "Individuazione frattografica di rotture per fatica in componenti metallici con microstrutture complesse"

Alongi J., Carosio F., Malucelli G. (2012) "Influence of ammonium polyphosphate-/poly(acrylic acid)- based Layer by Layer architectures on the char formation in cotton, polyester and their blends"

Fino D. (2012) "Influence of diesel fuel characteristics on soot oxidation properties"

Rosalbino F., Scavino G. (2012) "Influence of noble metals alloying additions on the corrosion behaviour of titanium in a fluoride-containing environment"

Rosalbino F., Scavino G. (2012) "Influence of rare earth metals addition on the corrosion behaviour of copper in alkaline environment"

Barbero G.., C.F. Pirri, E. Tresso (2012) "Influence of the dye impregnation time on the electrical impedance of a solar cell"

Barbero G. (2012) "Influence of the rheological properties on the electrical impedance of hydrogels"

Trigiante M. (2012) "Integrability of Supergravity Black Holes and New Tensor Classifiers of Regular and Nilpotent Orbits"

Zamparo M (2012) "Inverse problem for multivariate time series using dynamical latent variables"

M. Zamparo (2012) "Inverse problem for multivariate time series using dynamical latent variables"

Angelini E, Grassini S, Faraldi F (2012) "Investigation of the benzotriazole inhibition mechanism of bronze disease"

Actis Grande M. (2012) "Investigations on Different Processing Conditions on Soft Magnetic Composite Materials Behavior at Low Frequency"

Iazzi F., Lavagno A. (2012) "Kaon production at finite temperature and baryon density in an effective relativistic mean field model"

D. Fino, N. Russo (2012) "Kinetic study of diesel soot combustion with perovskite catalysts"

Fino D. (2012) "LCA of petroleum-based lubricants: state of art and inclusion of additives"

Daghero D., Sola A., Tortello M., Ummarino G.A., Gonnelli R.S., Nair J.R., Gerbaldi C. (2012) "Large Conductance Modulation of Gold Thin Films by Huge Charge Injection via Electrochemical Gating"

CROIN L (2012) "Laser-induced etching of few-layer graphene synthesized by Rapid-Chemical Vapour Deposition on Cu thin films"

Luca Croin (2012) "Laser-induced etching of few-layer graphene synthesized by Rapid-Chemical Vapour Deposition on Cu thin films"

Carosio F., Alongi J., Malucelli G. (2012) "Layer by Layer ammonium polyphosphate-based coatings for flame retardancy of polyester-cotton blends"

Alongi J., Carosio F., Malucelli G. (2012) "Layer by Layer complex architectures based on ammonium polyphosphate, chitosan and silica on polyester-cotton blends: flammability and combustion behaviour"

P.Allia (2012) "Magnetic dipolar coupling and collective effects for binary information codification in cost-effective logic devices"

Allia P (2012) "Magnetic properties of current-annealed amorphous thin films"

Gozzelino L., Gerbaldo R., Ghigo G. (2012) "Magnetic shielding efficiency of superconducting/ferromagnetic systems"

Ambra Caprile (2012) "Magnetization Process in Thin Laminations up to 1 GHz"

P. Allia (2012) "Magnetoelastic coupling in multilayered ferroelectric/ferromagnetic thin films: A quantitative evaluation"

A.C. Sparavigna (2012) "Measuring the Thermal Diffusivity in a Student Laboratory"

M. Lombardi, L. Montanaro (2012) "Mechanical properties of porous ceramics in compression: On the transition between elastic, brittle, and cellular behavior"

Baino F., Fiorilli S., Onida B., Verné E., Vitale-Brovarone C. (2012) "Mesoporous bioactive glass as a multifunctional system for bone regeneration and controlled drug release"

Zecchina R. (2012) "Message passing for quantified Boolean formulas"

Pirone R. (2012) "Methane catalytic combustion under pressure"

Angelini E., Faraldi F., Grassini S. (2012) "Micro-chemical surface investigation of brittle carthaginian and roman silver artefacts"

Angelini E., Grassini S., Faraldi F. (2012) "Micro-structural and micro-chemical composition of bronze artefacts from Tharros (Western Sardinia, Italy)"

Karin Santoro, Carlo Ricciardi (2012) "Microcantilver-based DNA hybridization sensors for Salmonella identification"

A. Lamberti, D. Pugliese, E. Tresso, C.F. Pirri (2012) "Microfluidic housing system: a useful tool for the analysis of dye-sensitized solar cell components"

Iotti R.C., Rossi F. (2012) "Microscopic theory of energy dissipation and decoherence in solid-state systems: A reformulation of the conventional Markov limit"

Biamino S., Pavese M., Fino P., Badini C. (2012) "Microstructure and mechanical properties of short carbon fibre/SiC multilayer composites prepared by tape casting"

A. Caprile (2012) "Microwave Behavior of Polymer Bonded Iron Oxide Nanoparticles"

Nicodemo di Pasquale, Daniele Marchisio (2012) "Mixing atoms and coarse-grained beads in modelling polymer melts"

F.A Deorsola, S. Bensaid, N. Russo, D. Fino (2012) "MoS2 nanoparticle precipitation in turbulent micromixers"

Di Pasquale N., Marchisio D. L., Barresi A. A. (2012) "Model validation for precipitation in solvent-displacement processes"

Fissore D., Pisano R., Barresi A. A. (2012) "Model-based framework for the analysis of failure consequences in a freeze-drying process"

Grassini S. (2012) "Modified POF Sensor for Gaseous Hydrogen Fluoride Monitoring in the Presence of Ionizing Radiations"

Fina A., Saracco G. (2012) "Morphology and conduction properties of graphite-filled immiscible PVDF/PPgMA blends"

Antonio Buffo, Marco Vanni, Daniele L. Marchisio (2012) "Multidimensional population balance model for the simulation of turbulent gas-liquid systems in stirred tank reactors"

Marco Sangermano (2012) "Multifunctional Luminescent Organic/Inorganic Hybrid Films"

Boetti N.G., Mura E., Scarpignato G., Milanese D. (2012) "Multiple visible emissions by means of up-conversion process in a microstructured tellurite glass optical fiber"

Hussain M., Fino D., Russo N. (2012) "N2O decomposition by mesoporous silica supported Rh catalysts"

M. Hussain, N. Russo, G. Saracco (2012) "NOx abatement by HC-assisted SCR over combustion synthesised-supported Ag catalysts"

Tortello M., Tresso E. (2012) "Nafion membranes with vertically-aligned CNTs for mixed proton and electron conduction"

Marchisio D.L., Barresi A.A. (2012) "Nanoprecipitation in confined impinging jets mixers: Production, characterization and scale up of pegylated nanospheres and nanocapsules for pharmaceutical use"

Gerbaldo R., Ghigo G., Gozzelino L. (2012) "Nanostructuring YBCO thin films by heavy-ion beam for local magnetic field and infrared photon detection."

Dolcini F. (2012) "Nanotransformation and Current Fluctuations in Exciton Condensate Junctions"

M. Sangermano (2012) "Network structure and thermomechanical properties of hybrid DGEBA networks cured with 1-methylimidazole and hyperbranched poly(ethyleneimine)"

Gerbaldi C., Nair J.R., Zanarini S., Penazzi N., Bongiovanni R. (2012) "New electrolyte membranes for Li-based cells: Methacrylic polymers encompassing pyrrolidinium-based ionic liquid by single step photo-polymerisation"

Kaniadakis G. (2012) "New trends in modern statistical physics"

Pirone R. (2012) "Nitrates and nitrous oxide formation during the interaction of nitrogen oxides with Cu-ZSM-5 at low temperature"

Iotti R.C., Rossi F. (2012) "Non-equilibrium longitudinal and transverse optical phonons in terahertz quantum cascade lasers"

Montorsi (2012) "Non-local order parameters for the 1D Hubbard model"

Scalerandi M., Gliozzi A. S. (2012) "Nonequilibrium phenomena in damaged media and their effects on the elastic properties"

Lavagno A. (2012) "Nonextensive statistical effects and strangeness production in hot and dense nuclear matter"

Lavagno A. (2012) "Nonextensive statistical effects in the quark-gluon plasma formation at relativistic heavy-ion collisions energies"

Grassini S. (2012) "Noninvasive Solution for Electrochemical Impedance Spectroscopy on Metallic Works of Art"

Caldarola D., Onida B. (2012) "Novel insights in Al-MCM-41 precursor as adsorbent for regulated haloacetic acids and nitrate from waters"

Hussain M., Fino D., Russo N. (2012) "Novel mesoporous silica supported ZnO adsorbents for the desulphurization of biogas at low temperatures"

M. Sangermano (2012) "Novel tetraspiroorthocabronates as successful anti-shrinkage agents for the photopolymerization of epoxy monomers"

Ripandelli S. (2012) "Numerical and experimental characterization of a novel modular passive micromixer"

Bernardo Ruggeri, Milena Bernardi (2012) "On the pre-treatment of municipal organic waste towards fuel production: a review"

Qiuping Chen, Qiuling Chen (2012) "One-step hydrothermal synthesis ofLi2FeSiO4/C composites as lithium-ionbattery cathode materials"

F.A. Deorsola (2012) "Optimization of the Ti 3SiC 2 MAX phase synthesis"

Alongi J., Frache A. (2012) "Optimization of the procedure to burn textile fabrics by cone calorimeter: part II. Results and discussion on nanoparticle finished polyester"

G. KANIADAKIS (2012) "PHYSICAL ORIGIN OF THE POWER-LAW TAILED STATISTICAL DISTRIBUTIONS"

Russo N., Fino D. (2012) "Particle Number and Size Emissions from a Small Displacement Automotive Diesel Engine: bioderived vs. conventional fossil fuels"

Bongiovanni R. (2012) "Perfluoropolyether polymers by uv curing: design, synthesis and characterisation"

Biazzo I., Braunstein A., Zecchina R. (2012) "Performance of a cavity-method-based algorithm for the prize-collecting Steiner tree problem on graphs"

F. Iazzi (2012) "Performance of upstream interaction region detectors for the FIRST experiment at GSI"

Marmo Luca (2012) "Perspectives of low-cost sensors adoption for air quality monitoring"

Dolcini F. (2012) "Phonon-Induced Backscattering in Helical Edge States"

UMMARINO G.A. (2012) "Phononic self-energy effects and superconductivity in CaC6"

Vitale-Brovarone C., Milanese D. (2012) "Phosphate glass fibres and their role in neuronal polarization and axonal growth direction"

M. Sangermano (2012) "Photo-cured epoxy networks reinforced with TiO2 in-situ generated by means of non-hydrolitic sol-gel process"

M. Sangermano (2012) "Photocatalytic activity of Epoxy/CNT nanocomposite films"

Scarpignato G. C., Mura E., Boetti N. G., Milanese D. (2012) "Photonic bandgap confinement in an all-solid tellurite glass photonic crystal fiber"

A. Vitale, C.F. Pirri, R.Bongiovanni (2012) "Photopolymerization of a perfluoropolyether oligomer and photolithographic processes for the fabrication of microfluidic devices"

B. Bonelli (2012) "Physico-chemical properties of imogolite nanotubes functionalized on both external and internal surfaces"

Tortello M., Daghero D., Ummarino G.A., and Gonnelli R.S. (2012) "Point-contact Andreev-reflection spectroscopy in Fe-based superconductors: multi-gap superconductivity and strong electron-boson interaction"

Gonnelli R. S., Tortello M., Daghero D. (2012) "Point-contact spectroscopy in Co-doped CaFe2As2: nodal superconductivity and topological Fermi surface transition"

G.Malucelli (2012) "Polymer Nanocomposites for InjectedMolded Applications"

J. Amici, P. Allia, M. Sangermano (2012) "Polymer grafting onto magnetite nanoparticles by "click" reaction"

Lorusso M., Ugues D. (2012) "Prediction of the Critical Load of a Metal-rolling System by Considering the Damage of the Coated Surface"

Bertone E., Venturello A., Geobaldo F. (2012) "Prediction of the optimum harvest time of 'Scarlet' apples using DR-UV-Vis and NIR spectroscopy"

Marchisio D.L., Barresi A.A. (2012) "Production of PEGylated nanocapsules through solvent-displacement in confined impinging jets mixers"

Kaniadakis G. (2012) "Progress in the physics of complex networks"

Fina A., Geobaldo F., Venturello A. (2012) "Properties of poly(lactic acid) nanocomposites based on montmorillonite, sepiolite and zirconium phosphonate"

D. L. Marchisio (2012) "Quadrature-based moment closures for non--equilibrium flows: hard-sphere collisions and approach to equilibrium"

Pisano R., Fissore D., Barresi A. A. (2012) "Quality by design in the secondary drying step of a freeze-drying process"

P. Rivolo, F. Frascella, P. Mandracci, F. Giorgis, E. Descrovi (2012) "Real time secondary antibody detection by means of silicon-based multilayers sustaining Bloch Surface Waves"

Descrovi E. (2012) "Reflection-mode TERS on Insulin Amyloid Fibrils with Top-Visual AFM Probes"

Dolcini F. (2012) "Renormalization group approach for the scattering off a single Rashba impurity in a helical liquid"

Laura Andrianopoli, Mario Trigiante (2012) "Rotating black holes, global symmetry and first order formalism"

Virga A., Rivolo P., Descrovi E., Frascella F., Geobaldo F., Giorgis F. (2012) "SERS active Ag nanoparticles in mesoporous silicon: detection of organic molecules and peptide–antibody assays"

M. Agnello (2012) "Search for the neutron-rich hypernucleus _{¿}^{9}He"

M. Agnello (2012) "Search for the T^{+} Pentaquark via the p^{-}p¿K^{-}X Reaction at 1.92¿¿GeV/c"

C. Badini, S. Biamino, M. Pavese, P. Fino (2012) "Self passivating behavior of multilayer SiC under simulated atmospheric re-entry conditions"

C. Ricciardi (2012) "Seprion-coated microcantilever sensors for PrPSc detection"

Salvo M., Rizzo S., Casalegno V., Ferraris M. (2012) "Shear and bending strength of SiC/SiC joined by a modified commercial adhesive"

Risplendi F., Cicero G. (2012) "Si(1 1 1) surface functionalized with H-bonded SAM: A theoretical study"

Fino P., Biamino S., D’Amico G. (2012) "Si-SiC-ZrB2 ceramics by silicon reactive infiltration"

Zecchina R. (2012) "Sign problem in the Bethe approximation"

Dolcini F. (2012) "Signature of interaction in dc transport of ac-gated quantum spin Hall edge states"

Ferraris M., Balagna C., Perero S., Ferraris S., Baino F., Vernè E. (2012) "Silver nanocluster/silica composite coatings obtained by sputtering for antibacterial applications"

Barbero G., Scalerandi M. (2012) "Similarities and differences among the models proposed for real electrodes in the Poisson-Nernst-Planck theory"

Alberto Frache (2012) "Simple Method for the Preparation of Composites Based on PA6 and Partially Exfoliated Graphite"

Vanni M. (2012) "Simulation of particle deposition in human central airways"

Raffa F.A. (2012) "Singularities in ion trap nonlinear coherent states"

Zeng J., Francia C., Gerbaldi C., Specchia S. (2012) "Smart synthesis of hollow core mesoporous shell carbons (HCMSC) as effective catalyst supports for methanol oxidation and oxygen reduction reactions"

LOMBARDI M, MONTANARO L. (2012) "Sol-gel derived 45S5 bioglass: synthesis, microstructural evolution and thermal behaviour"

Alongi J., Malucelli G. (2012) "Sol-gel treatments on cotton fabrics for improving thermal and flame stability: effect of the structure of the alkoxysilane precursor"

Allia P. (2012) "Sonochemical synthesis of versatile hydrophilic magnetite nanoparticles"

S. Bensaid, N. Russo, D. Fino (2012) "Soot Combustion Improvement in Diesel Particulate Filters Catalyzed with Ceria Nanofibers"

M. Piumetti, B. Bonelli (2012) "Spectroscopic Enlightening of the Local Structure Of VOX Active Sites in Catalysts for the Odh of Propane "

Milanese D., Ferraris M. (2012) "Spectroscopy of thulium and holmium heavily doped tellurite glasses"

Stefano Stassi (2012) "Spiky nanostructured metal particles as filler of polymeric composites showing tunable electrical conductivity"

C. Borile (2012) "Spontaneously Broken Neutral Symmetry in an Ecological System"

Rosalbino F. (2012) "Stability of the passive state of Zr–Nb crystalline alloys "

J.Alongi, G.Malucelli (2012) "State of the art and perspectives on sol-gel derived hybrid architectures for flame retardancy of textiles"

Iazzi F., Lavagno A. (2012) "Strangeness production at finite temperature and baryon density in an effective relativistic mean field model"

S. Stassi, C.F. Pirri (2012) "Stretchable and conformable metal–polymer piezoresistive hybrid system"

Daghero D., Tortello M., Ummarino G.A. (2012) "Strong-coupling d-wave superconductivity in PuCoGa5 probed by point-contact spectroscopy"

P. Allia (2012) "Study of the magnetic microstructure of Ni/NiO nanogranular samples above the electric percolation threshold by magnetoresistance measurements"

Mario Trigiante (2012) "Super-Ehlers in any dimension"

Zeng J., Monteverde Videla A.H.A., Francia C., Gerbaldi C., Specchia S. (2012) "Supporti di carbonio mesoporosi per elettroctalizzatori per celle a combustibile"

Ricciardi S., Frascella F., Mandracci P., Pirri C. F., Rivolo P. (2012) "Surface Functionalization by Poly-Acrylic Acid Plasma-Polymerized films for Microarray DNA Diagnostics"

Serena Ricciardi, Paola Rivolo (2012) "Surface Modification of Cell Culture Carriers: Routes to Anhydride Functionalization of Polystyrene"

A. Lamberti, C.F. Pirri (2012) "Surface energy tailoring of glass by contact printed PDMS"

Descrovi E., Frascella F., Moi V., Lamberti A., Giorgis F., Pirri C. F. (2012) "Surface label-free sensing by means of a fluorescent multilayered photonic structure"

Casalegno V., Salvo M., Ferraris M. (2012) "Surface modification of carbon/carbon composites to improve their wettability by copper"

S. Grassini, E. Angelini, F. Faraldi (2012) "Surface modification plasma treatments of PMMA optical fibres for sensing applications"

M. Sangermano (2012) "Surface property modification of Epoxy coatings by polydimethysiloxanes"

De Benedetti B., Tecchio P., Rollino S., Pignatelli S. (2012) "Sustainability perspectives when crop use is implemented indifferent sectors: a Life Cycle Assessment approach"

Paola Rivolo, Francesco Geobaldo (2012) "Switching of fluorescence mediated by a peroxynitrite-glutathione redox reaction in a porous silicon nanoreactor"

Stefano Stassi, Candido Fabrizio Pirri (2012) "Synthesis and Characterization of Gold Nanostars as Filler of Tunneling Conductive Polymer Composites"

Giulio Malucelli (2012) "Synthesis and Characterization of Nanocomposites of Thermoplastic Polyurethane with both Graphene and Graphene Nanoribbon Fillers"

Russo N., Pirone R., Fino D. (2012) "Synthesis and catalytic properties of CeO2 and Co/CeO2 nanofibers for diesel soot combustion"

G. Malucelli (2012) "Synthesis and characterization of graphene-containing thermoresponsive nanocomposite hydrogels of poly(Nvinylcaprolactam) prepared by frontal polymerization"

M. Sangermano (2012) "Synthesis of a new hyperbranched-linear-hyperbranched triblock copolymerand its use as a chemical modifier for the cationic photo and thermal curing of epoxy resins"

Deorsola F.A., Russo N., Fino D. (2012) "Synthesis, characterization and environmental assessment of nanosized MoS2 particles for lubricants applications"

M. ROSSO (2012) "THIXOCASTING AND RHEOCASTING TECHNOLOGIES, IMPROVEMENTS GOING ON"

Balagna C., Spriano S. (2012) "Tantalum-based multilayer coating on cobalt alloys in total hip and knee replacement"

Iazzi F. (2012) "The FIRST experiment at GSI"

A. Carbone (2012) "The FuturICT education accelerator"

Actis Grande M. (2012) "The Porosity Evaluation during ECAP in Aluminium PM Alloy"

Colucci G., Bongiovanni R. (2012) "The clay mineral modifier as the key to steer the properties of rubber nanocomposites"

Daniel Milanese (2012) "The effect of ZnF2 on the near-infrared luminescence from thulium doped tellurite glasses"

Sanchez Fellay L., Vanni M. (2012) "The effect of flow configuration on hydrodynamic stresses and dispersion of low density rigid aggregates"

M. Sangermano (2012) "The effect of hydroxy-spiroorthocarbonates on the cationic photopolymerization of an epoxy resin and on the mechanical properties of the final polymer"

A. Carbone (2012) "The emerging energy web"

F. Deorsola (2012) "The influence of physico-chemical properties of bare titania powders obtained from various synthesis routes on their photo-electrochemical performance"

ACTIS GRANDE M., FORNO I. (2012) "The role of processing conditions on the magnetic properties of insulated iron powder compounds at low frequencies"

Banchero M., Manna L. (2012) "The use of lysine to enhance the supercritical complexation of ketoprofen andcyclodextrins"

Jenny Alongi, Giulio Malucelli (2012) "Thermal and fire stability of cotton fabrics coated with hybrid phosphorus-doped silica films"

M. Armandi, B. Bonelli (2012) "Thermal collapse of sigle-walled aluminosilicate nanotubes: transformation mechanisms and morphology of the resulting lamellar phases"

Casalegno V., Ferraris M., Salvo M. (2012) "Thermal fatigue characterization of CFC divertor modules using a one step brazing process"

Alongi J. (2012) "Thermal properties and combustion behavior of POSS- and bohemite-finished cotton fabrics"

Ferri A., Rovero G., Sicardi S. (2012) "Thermal properties of wool fabrics treated in an Atmospheric Pressure Post-Discharge plasma equipment"

Boetti N.G., Mura E., Scarpignato G.C., Milanese D. (2012) "Thermal stability and spectroscopic properties of erbium-doped niobic-tungsten–tellurite glasses for laser and amplifier devices"

Frache A. (2012) "Thermal stability of high density polyethylene–fumed silica nanocomposites"

Alongi J., Malucelli G. (2012) "Thermal stability, flame retardancy and mechanical properties of cotton fabrics treated with inorganic coatings synthesized through sol-gel processes"

Fina A. (2012) "Thermo-Mechanical and Electrical Characterization of Epoxy-Organoclay Nanocomposites"

S. Biamino, E. Padovano, M. Pavese, G. D'Amico, X. Chen, P. Fino, C. Badini (2012) "Thermophysical properties of SiC multilayer prepared by tape casting and pressureless sintering"

L. Dall'Asta (2012) "Topology-induced inverse phase transitions"

Ferraris M., Salvo M., Casalegno V. (2012) "Torsion tests on AV119 epoxy - joined SiC"

Ferraris M, Salvo M, Rizzo S, Casalegno V (2012) "Torsional Shear Strength of Silicon CarbideComponents Pressurelessly Joined by a Glass-Ceramic"

BENSAID S., SARACCO G. (2012) "Towards Artificial Leaves for Solar Hydrogen and Fuels from Carbon Dioxide"

P. Allia (2012) "Towards a quantitative analysis of magnetic force microscopy data matrices"

P. Palmero, L. Montanaro (2012) "Transparent YAG obtained by spark plasma sintering of co-precipitated powder. Influence of dispersion route and sintering parameters on optical and microstructural characteristics"

Di Lupo F., Francia C., Bodoardo S., Gerbaldi C. (2012) "Tunable Ordered Nanostructured a-Fe2O3 Lithium Battery Anodes by Nanocasting Technique Using SBA-15 Hard Silica Templates"

G. Ghigo, R. Gerbaldo, L. Gozzelino (2012) "Tuning the response of YBCO microwave resonators by heavy-ion patterned micro-channels"

Nair J. R., Destro M., Gerbaldi C. (2012) "UV-Induced Radical Photo-Polymerization: A Smart Tool for Preparing Polymer Electrolyte Membranes for Energy Storage Devices"

R.Bongiovanni, A. Vitale (2012) "Ultra-thin films based on random copolymers containing perfluoropolyetherside chains"

FERRERO F., PERIOLATTO M. (2012) "Ultrasound for low temperature dyeing of wool with acid dye"

Gamba A. (2012) "Unraveling the influence of endothelial cell density on VEGF-A signaling"

M. Destro, C. Gerbaldi, N. Penazzi (2012) "Use of paper-making techniques for the production of Li-ion paper-batteries"

M. Piumetti, B. Bonelli (2012) "Vanadium-containing systems for oxidation reactions"

FERRERO F., PERIOLATTO M. (2012) "Water and oil-repellent coatings of perfluoro-polyacrylate resins on cotton fibers: UV curing in comparison with thermal polymerization"

UGUES D. (2012) "Wear Behavior of Fiber Laser Textured TiN Coatings in a Heavy Loaded Sliding Regime"

Actis Grande M. (2012) "Wear Characteristics of sintered cermets"

FERRERO F. (2012) "Wool Keratin Nanofibres for Copper(II) Adsorption"