IL PORTALE per la RICERCA dei DIPARTIMENTI

Carrera E., Maiarù M, Petrolo M. (2012) "1D component-wise models for failure analysis of composites"

Gerard Obiols-Rabasa, Sabrina Corpino, Fabio Nichele, Fabrizio Stesina, Nicole Viola (2012) "3-STAR program at Politecnico di Torino"

Carrera E., Maiaru M, Petrolo M. (2012) "A Component-Wise Approach for the Failure Analysis of Composite Structures"

Guglieri G. (2012) "A Ground Facility To Test Gnc Algorithms And Sensors For Autonomous Rendezvous And Docking"

Maggiore P. (2012) "A Multi-Objective Design Optimization Approach for the Preliminary Design of High Speed Low Pressure Turbine Disks for Green Engine Architectures"

N.Bosso, A.Gugliotta, N.Zampieri (2012) "A New Method to Evaluate Track Conditions over Time"

Guglieri G., Quagliotti F. (2012) "A Novel Approach for Trajectory Tracking of UAVs"

Amati N., Saggese R., Tonoli A, Ugarte I. (2012) "A lumped parameter model for fluid transmission lines"

Suarez Cabrera L.D., Tonoli A. (2012) "A multi-purpose control and power electronic architecture for active magnetic actuators"

Maggiore P. (2012) "A multifidelity approach to aerodynamic analysis in an integrated design environment"

E. Capello (2012) "A simulation-based approach for control design of uncertain UAVs"

TORDELLA D. (2012) "AN EXPERIMENTAL SETUP FOR VISUALIZATIONS AND MEASUREMENTS ON FREE HYPERSONIC JETS"

PASTRONE D. (2012) "AN ITALIAN NETWORK TO IMPROVE HYBRID ROCKET PERFORMANCE: THE STRATEGY, THE PROGRAM, THE RESULTS"

Gabriella Eula, Silvia Sirolli (2012) "APPLICAZIONE DI UN'ORTESI ATTIVA PER ARTI INFERIORI NEL CAMPO DELLA NEURORIABILITAZIONE ROBOTIZZATA"

Chiesa S., Di Meo G. A., Fioriti M., Viola N. (2012) "ASTRID - AIRCRAFT ON BOARD SYSTEMS SIZING AND TRADE-OFF ANALYSIS IN INITIAL DESIGN"

Alberto Varello, Erasmo Carrera (2012) "Accurate 1D structural models for the analysis of non-homogeneous biomechanical structures"

Belingardi G. (2012) "Adhesive Joining Technologies Activated by External Trims for Automotive Applications"

G. Jacazio, D. Bolognese, M. Sorli (2012) "Advanced Diagnostics for a Position Control System of the Pantographs of Tilting Trains"

Cinefra M., Carrera E. (2012) "Advanced layer-wise shells theories based on trigonometric functions expansions."

Filippi M., Pagani A., Carrera E., Petrolo M., Zappino E. (2012) "Advanced models for static and dynamic analysis of wing and fuselage structures"

A. Mura, R. Sesana (2012) "Ageing characterization of exhaust flexible couplings"

Fioriti M. (2012) "An Alenia Aermacchi study and experience on MBSE application"

Guglieri G., Quagliotti F. (2012) "An Innovative Mission Management System for Fixed-Wing UAVs"

Belingardi G. (2012) "An experimental and Finite Element study of the transverse bending behaviour of a T-joint in vehicle structures"

Cerino G., Massai D., Morbiducci U. (2012) "An innovative acoustic permeability measurement system for tissue engineering scaffolds"

C. Delprete, C. Rosso (2012) "Analisi Elastostatica Non-Lineare con il Metodo delle Celle"

N. BOSSO, E. BRUSA, N. ZAMPIERI (2012) "Analisi del comportamento elettromeccanico di strutture di forni ad arco elettrico in esercizio"

FRULLA G., CESTINO E. (2012) "Analysis of slender thin-walled composite box-beams including local stiffness and coupling effects"

Gherlone M., Di Sciuva M. (2012) "Analytic and computational perspectives of multi-scale theory for homogeneous, laminated composite, and sandwich beams and plates"

Gherlone M. (2012) "Application of smoothing techniques to damage detection using Proper Orthogonal Decomposition"

C. Delprete (2012) "Assessment of friction for cam-roller follower valvetrain system subjected to mixed non-newtonian regime of lubrication"

N. Bosso (2012) "Automated and Cost Effective Maintenance for Railway (ACEM–Rail)"

N. Amati, J. G. Detoni, A. Tonoli (2012) "Axial and Radial Dynamics of Rotors on Electrodynamic Bearings"

F. Curà, A. Mura, V. Cuffaro (2012) "BANCO PROVA PER ALBERI SCANALATI"

Di Meo G. A., Chiesa S., Viola N. (2012) "BENEFITS AND TECHNOLOGICAL IMPACTS OF THE FUTURE ATM SCENARIO FOR CIVIL AND MILITARY AIRCRAFT"

M. CINEFRA, E. CARRERA (2012) "Benchmarking of commercial codes by refined shell finite element models in the analysis of composite structures"

Bignardi C., Audenino A.L. (2012) "Bladder tissue passive response to monotonic and cyclic loading"

Bignardi C., Audenino A.L. (2012) "Bladder tissue response to physiological static and dynamic loads"

E. Carrera, M. Cinefra (2012) "Buckling of Laminated and Functionally Graded Plates using Radial Basis Functions,"

DE PASQUALE G., SOMA' A. (2012) "Characterization of damping in vibrating microplates through measurements in the time domain"

Belingardi G., Beyene A.T. (2012) "Crashworthiness analysis of a composite and thermoplastic foam structure for automotive bumper subsystem"

A. Mura (2012) "DISPOSITIVO DI MISURA ESAPODALE PER LO STUDIO DELLA FATICA MULTIASSIALE DI COMPONENTI MECCANICI"

S. Marchesiello, L. Garibaldi (2012) "Damage Detection for Beams subject to Moving Loads based on Wavelet Transforms"

S. Marchesiello, L. Garibaldi (2012) "Damage detection in structures under variations of temperature and clamping conditions"

Fasana A., Garibaldi L., Marchesiello S. (2012) "Damage identification and external effects removal for roller bearing diagnostics"

L. Casalino (2012) "Deployment of a Two-Spacecraft Formation into a Highly Elliptic Orbit with Collision Avoidance"

L. Casalino, D. Pastrone (2012) "Design Trade-offs for Hybrid Rocket Motors"

N. Amati, J. G. Detoni, R. Galluzzi, E. Gasparin (2012) "Design and Experimental Characterization of Electromagnetic Shock Absorbers for Landing Gears"

Capello E., Guglieri G., Quagliotti F., Sartori D. (2012) "Design and Validation of a L1 Adaptive Controller for a mini-UAV Autopilot"

Clara Mattu, Susanna Sartori, Monica Boffito, Gianluca Ciardelli (2012) "Design of New Polymeric Formulations for Drug Nanocarriers."

Mousavi M., Somà A. (2012) "Design of a Hand Exoskeleton for Space Extravehicular Activities"

Romeo G., Cestino E. (2012) "Design of inter-city transport aircraft powered by fuel cell & flight test of zero emission 2-seater aircraft powered by fuel cells"

E. BRUSA (2012) "Design of smart plucked energy scavengers for rotating systems "

Stesina F., Corpino S., Obiols Rabasa G. (2012) "Design of the Active Attitude Determination and Control System for the e-st@r cubesat"

S. Mauro, C. Scarzella (2012) "Developing a parallel kinematic suntracker for HCPV"

Carello M. (2012) "Development of Android data logging and telemetry application for low power consumption vehicles"

Belingardi G. (2012) "Development of vehicle body components relevant for side impact and assessment of the achieved occupant safety"

G.Genta (2012) "Dynamic Modelling of Planetary Rovers"

E. Brusa, N. Bosso, N. Zampieri (2012) "ELECTROMECHANICAL COUPLED RESPONSE OF THE AC ELECTRIC ARC FURNACE STRUCTURES DURING THE SCRAP MELTING PROCESS"

Belingardi G. (2012) "Early design methods for an HEV - Optimizing HEV vehicle design to achieve CO2 targets"

Erasmo Carrera, Alberto Varello, Alessandro Lamberti (2012) "Effect of Warping due to Aerodynamic Loadings in Composite Wings"

Beyene A.T., Belingardi G. (2012) "Effect of beam profiles on progressive failure and crashworthiness of composite bumper beam"

R. Sesana (2012) "Effect of the finish surface on HCF in steels: a thermographic approach"

Massai D., Cerino G., Morbiducci U. (2012) "Electro-Mechanical Sensorized Bioreactor for Cardiac Tissue Engineering"

SOMA' A., DE PASQUALE G. (2012) "Energy vibration harvesting for supplying sensors networks in railway vehicles monitoring"

Cavatorta M.P. (2012) "Enhancing cooperation between the industrial world and the academia in the area of ergonomics"

M.M. Sari, E. Brusa (2012) "Evaluating the electrical discharge machining (EDM) parameters with using carbon nanotubes"

Colombo F., Raparelli T., Trivella A., Viktorov V. (2012) "Experimental characterization of an electrospindle with gas bearings"

Pastorelli Stefano, Gastaldi Laura (2012) "Experimental comparison of functional methods to determine average axis of rotation in polycentric knee"

Marchesiello S., Fasana A., Garibaldi L. (2012) "External condition removal in bearing diagnostics through EMD and One-Class SVM"

Petrolo M., Carrera E. (2012) "FLUTTER ANALYSIS OF COMPOSITE WINGS BY 1D CUF MODELS"

Viscio M.A., Maggiore P., Viola N. (2012) "FUTURE SPACE EXPLORATION: FROM REFERENCE SCENARIO DEFINITION TO KEY TECHNOLOGIES ROADMAPS"

E. Carrera (2012) "Free vibration Analysis of Laminated Plates using Wavelet Collocation and a Unified Formulation,"

Carrera E., Pagani A., Petrolo M. (2012) "Free vibration analysis of complex wing structures by refined one-dimensional formulations"

Maria Antonietta Viscio, Paolo Maggiore, Nicole Viola (2012) "Future Human Space Exploration: key technologies assessment and applicability analysis"

Goglio L., Paolino D. S. (2012) "GIUNTO TUBOLARE INCOLLATO: RICERCA DI UNA SOLUZIONE ESPLICITA"

S. Rosa (2012) "Graph optimization with unstructured covariance: fast, accurate, linear approximation"

Guglieri G., Quagliotti F. (2012) "Ground Control Station Embedded Mission Planning for UAS"

L. Peroni, M. Scapin (2012) "HIGH STRAIN-RATE MECHANICAL BEHAVIOUR OF A COPPER MATRIX COMPOSITE FOR NUCLEAR APPLICATIONS"

Viscio M.A., Maggiore P., Viola N. (2012) "HUMAN EXPEDITION TO A NEAR EARTH ASTEROID: REFERENCE MISSION AND TECHNOLOGIES"

Viscio M.A, Maggiore P., Viola N. (2012) "HUMAN EXPLORATION MISSION TO A NEAR EARTH ASTEROID: MISSION DESCRIPTION AND KEY TECHNOLOGIES ASSESSMENT"

Sabrina Corpino, Fabrizio Stesina (2012) "Hardware in the loop test campaign for e-st@r cubesat"

Jacazio G., Bolognese D., Sorli M. (2012) "Health management system for the pantographs of tilting trains"

Luigi Mazza, Andrea Trivella, Roberto Grassi (2012) "High speed friction and wear measurements on guide rings for reciprocating compressors"

Colombo F., Raparelli T., Trivella A., Viktorov V. (2012) "High speed spindle with modified geometry gas bearings"

Jacazio G., Mornacchi A., Pastorelli S., Sorli M. (2012) "Hydraulic servoactuator for adaptive force control of fast trains pantographs"

M. Scapin, L. Peroni (2012) "INVESTIGATION OF THE MECHANICAL BEHAVIOUR OF METAL-DIAMOND COMPOSITES"

Viola N., Viscio M.A. (2012) "ITINERANT HUMAN OUTPOST FOR FUTURE SPACE EXPLORATION"

Carbone L., Audenino A., Morbiducci U. (2012) "Identification of the albumin-carbon nanotube interaction surface by molecular simulations"

Belingardi G. (2012) "Improvement of passive occupant safety in case of side impact using novel body-in-white structural parts"

Giulia Cerino, Diana Massai, Diego Gallo, Umberto Morbiducci (2012) "Innovative Microgravity Perfusion Bioreactor for Hydrogel-based Regenerative Medicine"

Cerino G., Massai D., Gallo D., Morbiducci U. (2012) "Innovative low-cost microgravity bioreactor for hydrogel-based myocardial regeneration"

C. Rosso, C. Delprete (2012) "Inverse Eigensensitivity Approach in Model Updating of Avionic Components"

Rosso C., Delprete C. (2012) "Inverse eigensensitivity approach in model updating of avionic components"

L. Peroni, M. Scapin (2012) "Investigation about the influence of the mechanical properties of lead core and brass jacket of a NATO 7.62 mm ball bullet in numerical simulations of ballistic impacts"

CINEFRA M., CARRERA E. (2012) "Isoparametric shell finite elements based on Unified Formulation"

Chiono V., Carmagnola I., Ciardelli G. (2012) "Layer-by-layer as a tool to tailor the surface properties of biomedical devices"

L.Peroni, M. Scapin (2012) "L’IMPIEGO DI ESTENSIMETRI A SEMICONDUTTORE IN PROVE AD ELEVATO STRAIN-RATE"

E. CARRERA, M. CINEFRA (2012) "MITC-type shell elements based on RMVT and Unified Formulation"

Paolino D. S., Rossetto M., Chiandussi G. (2012) "MODELLI PROBABILISTICI PER CURVE S-N IN REGIME GIGACICLICO"

Pastorelli Stefano, Gastaldi Laura (2012) "Markerless analysis of double pooling techniques in cross-country sit-ski athletes during competition "

Bignardi C. (2012) "Measured velocity profiles as inlet boundary conditions in computational hemodynamic models of the human aorta"

D. BOTTO, M. LAVELLA, M.M. GOLA (2012) "Measurement Of Contact Parameters Of Flat On Flat Contact Surfaces At High Temperature"

Carbone L., Bignardi C., Morbiducci U. (2012) "Mechanical Properties of Single-Walled Carbon Nanotubes"

L. Peroni, M. Scapin, C. Fichera (2012) "Mechanical properties at high strain-rate of lead core and brass jacket of a NATO 7.62 mm ball bullet"

N. Amati, J. G. Detoni, A. Tonoli (2012) "Model Based Design of a Rotor Supported by Radial Electrodynamic Bearings"

Romeo G., Cestino E. (2012) "More/All electric aircraft based on fuel cell energy system: the ENFICA-FC experience"

Laura Gastaldi, Stefano Pastorelli (2012) "Motion capture of the push gesture in cross-country sit-skiers during Paralympics"

Umberto Morbiducci (2012) "Multiscale biomechanics of actin filaments and crosslinked networks"

G. Guglieri (2012) "NMPC and Genetic Algorithm Based Approach for Trajectory Tracking of UAVs"

N. BOSSO, E. BRUSA (2012) "NUMERICAL MODELING AND DYNAMIC BEHAVIOR PREDICTION OF THE AC ELECTRIC ARC FURNACE STRUCTURES DURING THE SCRAP MELTING PROCESS"

P. Gili, M. Battipede (2012) "Neural networks for air data estimation: test of neural network simulating real flight instruments"

Quaglia G. (2012) "New frontiers for Epi.q robot family"

Maria Antonietta Viscio, Nicole Viola (2012) "Next space exploration step: human expeditions to Libration points."

Detoni J. G., Amati N., Tonoli A. (2012) "Non-dimensional design approach for electrodynamic bearings"

Zucca S., Gola M. (2012) "Non-linear Dynamics of Steam Turbine Blades with Shroud: Numerical Analysis and Experiments."

E. Carrera (2012) "Non-linear dynamicresponse of activehybrid compositebeam embedded withSMA wires"

Zucca S., Firrone C. M. (2012) "Nonlinear dynamics of mechanical systems with friction contacts: Harmonic Balance Method and multiple solutions"

Rosso C. (2012) "Nonlinear testing and models comparison of magneto-mechanical energy scavengers"

N. BOSSO, E. BRUSA (2012) "Numerical modeling of the dynamic behavior of shredder hammers and correlation with material damage"

Garibaldi L. (2012) "OUTPUT-ONLY, TIME-VARIANT AND NON LINEAR SYSTEMS: HEADACHE OR CHALLENGE TO SYSTEM IDENTIFICATION ? "

Rosa S. (2012) "Object Tracking with Adaptive HOG Detector and Adaptive Rao-Blackwellised Particle Filter"

ROSA S (2012) "Object tracking with adaptive HOG detector and adaptive Rao-Blackwellised particle filter"

Erasmo Carrera, Matteo Filippi, Alfonso Pagani, Marco Petrolo, Enrico Zappino (2012) "On the use of refined 1D structural models for reinforced cylinders with ends sealed "

Bignardi C. (2012) "One stage osteochondral repair with cartilage fragments in a hybrid scaffold: a promising strategy? An animal study"

Bignardi C., Audenino A. (2012) "One stage osteochondral repair: a mechanical evaluation"

Casalino L. (2012) "Optimal Cooperative Deployment of a Two-Satellite Formation into a Highly Elliptic Orbit"

Gabriella Eula (2012) "Optimisation of a MR-Compatible mechatronic device useful for fMRI analysis"

Casalino L., Pastrone D. (2012) "Optimization of Civil Turbofan with Evolutionary Algorithms"

L. Peroni, M. Scapin, C. Fichera (2012) "PROBLEMATICHE NELLA SIMULAZIONE NUMERICA DI SCENARI DI IMPATTO BALISTICO"

Avalle M., Scattina A. (2012) "PROGETTAZIONE DI UN CORPO FRENO INNOVATIVO PER BICICLETTE IN MATERIALE POLIMERICO"

Zappino E., Carrera E., Cinefra M. (2012) "Panel flutter analysis of composite panel with non classical configuration."

Massimiliana Carello (2012) "Performance optimization for the XAM hybrid electric vehicle prototype"

Clara Mattu, Monica Boffito, Antonella Silvestri, Tianran Wang, Susanna Sartori, Gianluca Ciardelli (2012) "Polymeric Nanosystems for the Delivery of Chemotherapeutic Drugs."

Monica Boffito, Susanna Sartori, Antonella Silvestri, Gianluca Ciardelli (2012) "Polyurethane-based Scaffolds for the Regeneration of Anisotropic Tissues"

Chiono V., Silvestri A., Boffito M., Mattu C., Sartori S., Ciardelli G. (2012) "Polyurethane-based scaffolds for soft tissue engineering"

Cavatorta M.P. (2012) "Process ergonomics of motor vehicles"

DE PASQUALE G., SOMA' A. (2012) "Progettazione di energy harvesters vibrazionali per il monitoraggio di sistemi meccanici"

Baldissera P., Delprete C. (2012) "Progettazione di un'appendice alla pedivella per il miglioramento delle prestazioni ciclistiche"

N. Bosso, A. Gugliotta, N. Zampieri (2012) "Progettazione e realizzazione di un banco prova per sedili ferroviari"

N.Bosso, A.Gugliotta, N.Zampieri (2012) "RTCONTACT: An Efficient Wheel-Rail Contact Algorithm for Real-Time Dynamic Simulations"

Viola N., Chiesa S., Fioriti M. (2012) "Rational and affordable concepts of Landing Gear for small reentry vehicle demonstrators"

Belingardi G. (2012) "Recent development in car body lightweight design - a contribution toward greener environment"

Carrera E., Miglioretti F., Petrolo M. (2012) "Refined 1D-elements for multifields analysis"

Alberto Varello, Erasmo Carrera (2012) "Refined Kinematics for Dynamic Analysis of Thin-Walled Composite Beams"

Belingardi G. (2012) "Relevance of tubular ring structures for body-in white lateral crash performance and occupant safety evaluation"

G. De Pasquale, A. Soma' (2012) "Reliability improvement in microstructures by reducing the impact velocity through electrostatic force modulation"

Jacazio G., Mornacchi A., Sorli M. (2012) "Robust Mechatronic Actuation System for UAV Primary Flight Controls"

Corpino S. (2012) "Robust Multi-Disciplinary Optimization of Unmanned Entry Capsules"

Tonoli A., Suarez L.D. (2012) "Rotor on cone-shaped active magnetic bearings with three-phases power drivers"

N. Viola (2012) "SET, A SCENARIO EVALUATOR TOOL FOR SUPPORTING SPACE-EXPLORATION MISSION-ARCHITECTURE DESIGN"

Colombo F., Raparelli T., Viktorov V. (2012) "SVILUPPO DI UN REGGISPINTA ASSIALE DINAMICO AD ARIA"

Paolino D. S., Rossetto M., Chiandussi G., Tridello A. (2012) "SVILUPPO DI UNA MACCHINA A ULTRASUONI PER PROVE DI FATICA GIGACICLICA"

Avalle M., Scattina A. (2012) "SVILUPPO DI UNA METODOLOGIA DI SIMULAZIONE DEL PROCESSO DI FORMATURA DEI TUBI PER I FASCI TUBIERI FORZATI NELLE PIASTRE FRONTALI"

Nichele F., Corpino S. (2012) "SYSTEM OF SYSTEMS ANALYSIS OF LOW-COST SMALL-SATELLITES SOLUTIONS FOR END-USER ORIENTED SPACE-BASED SERVICES"

Massai D., Morbiducci U. (2012) "Scale/Physics/Time properties and functions in bioartificial systems"

Tonoli A. (2012) "Self-powered transformer eddy current damper for vibration control of rotors"

Jacazio G., Sorli M. (2012) "Smart force control system for real time loading of primary flight control actuators"

Alberto Varello, Erasmo Carrera (2012) "Static and Dynamic Analysis of a Thin-Walled Layered Cylinder by Refined 1D Theories"

R. Sesana (2012) "Stima del limite di fatica di acciai mediante l’area del ciclo di isteresi"

Raparelli T., Mazza L., Trivella A. (2012) "Study of a non-conventional sealing system for low-friction pneumatic cylinders"

F. Colombo, T. Raparelli, A. Trivella, V. Viktorov (2012) "Study of the static and dynamic performance of rectangular air pads by means of lumped parameters models"

D. BOTTO, M. LAVELLA, M. GOLA (2012) "TEST RIG FOR EXTRACTION OF THE CONTACT PARAMETERS FOR PLANE ON PLANE CONTACT."

Gianluca Ciardelli (2012) "The Influence of Proteoglycans on Collagen Properties"

E. Carrera (2012) "Thermo-Mechanical Analysis of Isotropic and Orthotropic Beams using a Unified Formulation"

M. CINEFRA, E. CARRERA (2012) "Thermo-mechanical analysis of functionally graded structures via refined shell finite elements"

S. Marchesiello (2012) "Time- and frequency-domain subspace identification of a nonlinear spacecraft"

Chiesa S. (2012) "Turbojet Analytical Model Development and Validation"

Morbiducci U. (2012) "Un metodo acustico per la determinazione della permeabilità di scaffolds utilizzati in medicina rigenerativa"

Tosetti M., Maggiore P. (2012) "Variable fidelity aerodynamic analysis for multidisciplinary wing design"

Romeo G., Cestino E. (2012) "Very-long endurance solar powered autonomous UAVS: role and constraints for GMES applications"

Ermanno Giorcelli, Giuliana Mattiazzo, Mattia Raffero (2012) "design of a spar buoy for offshore wind turbines"

Lisco G. (2012) ""New Gait Analysis method based on Wiimote technology and fusion with inertial sensors""

Gallo D., Morbiducci U. (2012) "Effect of Common Carotid Artery Inlet Length on Helical Flow at the Carotid Bifurcation. Influence on Exposure to Disturbed Shear"

Goglio L (2012) "Effect of environmental exposure on the fracture properties of an epoxy adhesive"

Federico Miglioretti, Erasmo Carrera (2012) "Genetic algorithm to build best theory diagram for laminated sandwich plate"

Diego Gallo, Umberto Morbiducci (2012) "Helical Flow in Carotid Bifurcation: a Surrogate Marker of Exposure to Abnormal Shear?"

Gallo D., Morbiducci U. (2012) "Helical flow in carotid bifurcation: influence on exposure to disturbed shear"

Massai D., Cerino G., Gallo D., Morbiducci U. (2012) "Innovative low-cost microgravity bioreactor for hydrogel-based regenerative medicine strategies"

Iovieno M., Di Savino S., De Santi F., Tordella D. (2012) "Intermittency layers associated to turbulent interfaces"

Salvatore Brischetto, Erasmo Carrera (2012) "Mechanical and hygrothermal static analysis of multilayered composite structures"

Chiono V (2012) "Nanostructured multilayered coating of drug releasing polymeric blend substrates for vascular tissue engineering"

F. De Santi, S. Scarsoglio, D. Tordella (2012) "On the frequency of hydrodynamic perturbations. Early andintermediate transients."

Gallo D. (2012) "Revealing arterial flow, revelling in exploratory soundscapes"

Gastaldi Laura, Pastorelli Stefano (2012) "Sperimentazione di un metodo innovativo per l'analisi cinematica 3D in 7 cani di razza Golden Retriever"

Salvatore Brischetto, Erasmo Carrera (2012) "Thermo-electro-mechanical coupling effects in static and free vibration analysis of composite plates and shells"

S. Scarsoglio, F. De Santi, D. Tordella (2012) "Travelling perturbations in sheared flows: sudden transition infrequency and phase speed asymptotics"

Goglio L. (2012) "Effect of different substrate pre-treatments on the resistance to moist environment"

Gianluca Ciardelli, Clara Mattu, Monica Boffito, Antonella Silvestri, Susanna Sartori (2012) "Engineering Block Polyurethanes for Smart Nanocarriers"

Viscio M.A., Viola N. (2012) "How does the human presence impact a mission to a Near Earth Asteroid?"

Carrera E., Cinefra M. (2012) "Influence of zig-zag and warping effects on the free vibration of functionally graded sandwich plates according to hyperbolic shear deformation theories."

Clara Mattu, Antonella Silvestri, Monica Boffito, Susanna Sartori, Gianluca Ciardelli (2012) "Novel Materials with Tuned Wettability to Modulate Nanoparticles Fate"

Paolino D. S., Chiandussi G., Rossetto M. (2012) "STATISTICAL MODEL FOR GIGACYCLE S-N FATIGUE CURVES: PARAMETER ESTIMATION "