IL PORTALE per la RICERCA dei DIPARTIMENTI

P. Gasbarri (2012) "A HYBRID TWO-LEVEL APPROACH USED IN THE OPTIMIZATIONAN OF AN AERONAUTICAL COMPOSITE STRUCTURE"

D. Borello, A. Corsini, F. Rispoli, E. Tortora (2012) "A co-powered Concentrated Solar Power concept for small size combined Heat and Power"

Antonella Ingenito, Fausto Gamma (2012) "A comparative study of combustion between biofuels and fossil fuels"

M. Bernardini, S. Pirozzoli (2012) "A comparative study of turbulent boundary layer wall pressure fluctuations obtained from high-speed tomographic PIV and DNS"

M. Tronci (2012) "A reverse engineering approach to enhance machinery design for safety"

Costantino F., Di Gravio G., Tronci M. (2012) "A simulation based game approach for teaching operations management topics"

Gasbarri P (2012) "A two-level procedure based on Genetic Algorithms to optimize an aeronautical composite structure"

Toro C (2012) "AN EXAMPLE OF THERMO-ECONOMIC OPTIMIZATION OF A CCGT BY MEANS OF THE PROPER ORTHOGONAL DECOMPOSITION METHOD"

Del Zotto L (2012) "ANALISI DEL FUNZIONAMENTO DI UNA DIRECT METHANOL PROTON EXCHANGE MEMEBRANE FUEL CELL SOGGETTA ALL’EFFETTO DEL FENOMENO DI CROSS-OVER E ALL’INFLUENZA DELLA TEMPERATURA"

Daniele Bianchi, Francesco Nasuti (2012) "Ablative Material Behavior in Oxygen/Methane Thruster Environment"

Giuliano Coppotelli (2012) "Advanced frequency-domain modal analysis for dealing with measurement noise and parameter uncertainty"

Antonio Carcaterra, Aldo Sestieri (2012) "Advances in Complex Envelope Vectorization: industrial applications and transient dynamics"

A. Corsini (2012) "An Acoustic-Based Stall Warning System For Application in Induced-Draft Boiler Fans Ventilation"

Toro C (2012) "An exergy based method for the optimal integration of a building and its heating plant. Part 1: comparison of domestic heating systems based on renewable sources"

Enrico Cavallini, Bernardo Favini (2012) "Analysis of VEGA Solid Stages Static Firing Tests towards the Maiden Flight"

D. Borello, Z. Del Prete, A. Marchegiani, F. Rispoli, E. Tortora (2012) "Analysis of an integrated PEMFC/ORC power system using ammonia for hydrogen storage"

Fabrizio Piergentili (2012) "Analysis of close approach in geo using optical measurements"

Battista F (2012) "Analysis of supercritical jets"

Marco Pizzarelli, Francesco Nasuti, Marcello Onofri (2012) "Analysis on the Effect of Channel Aspect Ratio on Rocket Thermal Behavior"

G. Coppotelli, F. Mastroddi (2012) "Assessment of a Ground Vibration Test (GVT)-based flutter analysis by using Flight Vibration Test (FVT) measured data"

Francesco Nasuti (2012) "Boundaries for heat transfer deterioration onset in supercritical pressure channel flows"

M.Valorani, G.Gargiulo (2012) "CFD Analysis of Laser-Pulse Ignition of GCH4/GO2 in M3-DLR Test Bench"

A. Boschetto, F. Campana (2012) "CHARACTERISATION OF A FUSED DEPOSITION MODELLING PROCESS THROUGH GEOMETRIC TOLERANCE ANALYSIS"

P. Gasbarri (2012) "CONTROL PARAMETERS TRANSITION DURING DEPLOYING OPERATIONS OF A SPACE FLEXIBLE STRUCTURE VIA MULTI-BODY APPROACH"

K. Cipri, V. Naso (2012) "Cell cryopreservation through Pulse Tube refrigerator: toward a final prototype"

M. Bernardini, S. Pirozzoli, P. Orlandi (2012) "Compressible boundary layer transition induced by isolated roughness elements"

M. Bernardini, S. Pirozzoli (2012) "Compressible wall turbulent dynamics: optimal transient growth analysis "

Nicola Pio Belfiore, Andrea Micangeli (2012) "Correlation Analysis between Students' Cognitive Styles and their Attitude to join Kinematic and Dynamics Open Source Codes Projects"

Daniele Bianchi, Francesco Nasuti, Marcello Onofri (2012) "Coupled CFD Analysis of Thermochemical Erosion and Unsteady Heat Conduction in Solid Rocket Nozzles"

Barbara Betti, Marco Pizzarelli, Francesco Nasuti (2012) "Coupled Heat Transfer Analysis in Regeneratively Cooled Thrust Chambers"

M. Pizzarelli, F. Nasuti, M. Onofri (2012) "Coupled Numerical Simulation of Wall Heat Conduction and Coolant Flow in Liquid Rocket Engines"

Paolo Gasbarri (2012) "Design of debris removal missions performed by robotic graspers"

Fabrizio Piergentili (2012) "Desing and realization of an innovative deployable solar panel system for cubesats"

L. Iess (2012) "Determination of the planetary rotation by imaging from orbit"

A. Micangeli (2012) "Development of a Biogas Stirling System for Rural Electrification in Uganda "

Annalisa Fregolent (2012) "Direct Hybrid Formulation for Substructure Decoupling"

G. Coppotelli (2012) "Dynamic Identification of Helicopter Structures using Operational Modal Analysis Methods in the Presence of Harmonic Loading"

G. Coppotelli (2012) "Dynamic Identification of Wind Turbine System Under Operational Conditions Using FBG Transducers"

Franco Mastroddi, Giuliano Coppotelli (2012) "Dynamic simulation of vega SRM bench firing by using propellant complex characterization"

Francesco Barbaglio, Luciano Iess (2012) "ESA ¿DOR enhancement: agencies interoperability, wideband and low-SNR functionality"

P. Gasbarri (2012) "EXPERIMENTAL ORBITAL RENDEZVOUS OPERATIONS VIA VISUAL BASED TECHNIQUES"

M. Tronci (2012) "Eco-Maintenance: the Improvement of Environmental Sustainability by Means of Maintenance"

D. Lentini (2012) "Effect of gas-phase carbon depletion by sooting on the structure of methane/air flamelets"

N. Roveri, A. Carcaterra (2012) "Energy Distribution In Impulsively Excited Structures"

P. Gualtieri, C.M. Casciola (2012) "Exact regularized point particle method for particle-laden flows in the two-way coupling regime"

L. Marino, G.P. Romano (2012) "Experimental analysis of the aeroacoustics of free and impinging jets"

Barbara Betti, Francesco Nasuti (2012) "Experimental investigation and CFD simulation of the film cooling in O2/CH4 subscale combustion chamber"

A. Micangeli (2012) "Experimental investigation of the buffer space influence on the performance of a gamma type Stirling engine"

A. Corsini (2012) "Experiments on the Use of Symmetrized Dot Patterns for in-Service Stall Detection in Industrial Fans"

Battista F (2012) "Flame surface evolution and flame stretch in a turbulent premixed jet flame "

A. Carcaterra (2012) "Fluttering skid phenomena in high speed marine vehicles"

A. Culla, A. Fregolent (2012) "Getting a symmetric residue matrix from the poly-reference least square complex frequency domain technique"

P. Cappa (2012) "Grasping influence on reaching in static and dynamic condition in healthy adults"

G. Coppotelli (2012) "Helicopter in-Flight Modal Analysis: solutions for dealing with harmonics and noise"

Rocco Crescenzi, Nicola Pio Belfiore (2012) "High Density Compliant Contacting Technology for Integrated High Power Modules in Automotive Applications"

A. Carcaterra (2012) "High speed fluttering skids with elastic suspensions"

A. Bardazzi, G. Graziani (2012) "Hydroelastic study of the impact phenomena in sloshing flow"

Paolo Gasbarri (2012) "Image based control of a free flying platform"

A.Micangeli (2012) "Implementation and right setting of a test bench for the acquisition of relevant parameters of a gamma type Stirling engine"

L. Iess, M. Di Benedetto, M. Marabucci, P. Racioppa (2012) "Improved Doppler tracking systems for deep space navigation"

Nicola P. Belfiore, Rocco Crescenzi (2012) "In Quest of a Reliable Method of Characterization of the Mechanical Properties of Silicon Micro-Robots"

P. Gualtieri (2012) "Inertial particles in homogeneous shear turbulence: experiments and direct numerical simulation"

Fabrizio Piergentili (2012) "Inflatable system based on polyurethanic foam"

G. Coppotelli (2012) "Integrated sensor system for structural integrity and load monitoring of wind turbines"

D. Borello, A. Corsini, F. Rispoli (2012) "Investigation on the unsteady aerodynamics of an industrial fan"

D. Borello, A. Corsini, F. Rispoli (2012) "Large-eddy simulation of the aerodynamic and aero-acoustic performance of an industrial fan designed for tunnel ventilation"

Favini B, Cavallini E (2012) "Lessons Learnt during the Development of VEGA Launcher Solid Rocket Motors"

F. Costantino, G. Di Gravio, M. Tronci (2012) "Logistics Network Design for Mass Customization"

A. Boschetto, F.Campana (2012) "MORPHOMETRIC ANALYSIS OF Al FOAMS PRODUCED USING DIFFERENT MANUFACTURING PROCESSES"

DEL SETTE F (2012) "Mars exploration: thermo-mechanical and chemical Behavior of Kevlar and Nylon for parachute Applications"

P. P. Ciottoli, M. Valorani, M. Bernardini, S. Pirozzoli (2012) "Methane/Air Turbulent Coaxial Jet Flame with Large Eddy Simulation and Conditional Moment Closure "

P. Gualtieri, C.M. Casciola (2012) "Microswimming close to patterned surfaces"

F. Stella (2012) "Mixing enhancement in hybrid rocket motor using vortex generators"

D. Borello, E. Tortora (2012) "Modelling of a CHP SOFC power system fed with biogas from anaerobic digestion of municipal wastes integrated with a solar collector and storage units"

A. Boschetto, F. Campana (2012) "Morphological analysis of cellular materials by image analysis"

M. Parisi, S. Finocchiaro, L. Iess (2012) "Multi-arc and batch-sequential filters for the orbit determination of ESA’s JUICE mission"

M. Bernardini, S. Pirozzoli (2012) "Multi-variate Statistics of the Wall Pressure Field beneath Supersonic Turbulent Boundary Layers "

A. Carcaterra (2012) "Nano Vibrations of Flexural Structures: Quantum Mechanics Approach"

BIANCHI D, NASUTI F, ONOFRI M (2012) "Navier-Stokes Analysis of Scale Effects on Ablation in Carbon-Carbon Rocket Nozzles"

D. Bianchi, F. Nasuti (2012) "Navier-Stokes Simulation of Graphite Nozzle Erosion Under a Wide Range of Pressure Conditions"

A. Ingenito (2012) "Non-Premixed Supersonic Flames: Combustion Models"

Daniele Bianchi, Francesco Nasuti (2012) "Numerical Analysis of Nozzle Material Thermochemical Erosion in Hybrid Rocket Engines"

Luca Marino (2012) "Numerical Analysis of a Binary Jet Mixture Impinging on a Plate"

B. Betti, F. Nasuti (2012) "Numerical Simulation of Hot-Gas Side Heat Transfer Enhancement in Thrust Chambers by Wall Ribs"

Ingenito A., Gamma F. (2012) "Numerical Simulation of a Gas Turbine Engine with Constant Volume Combustion"

Barbara Betti, Francesco Nasuti, Marcello Onofri (2012) "Numerical Study of Heat Transfer in Film Cooled Thrust Chambers"

D. Bianchi, F. Nasuti (2012) "Numerical analysis of nozzle flows with finite-rate surface ablation and pyrolysis-gas injection"

A. Corsini, F. Rispoli, P. Venturini (2012) "Numerical modelling of erosion in highly-loaded axial flow fans"

Venturini P (2012) "Numerical simulation of coal-fly ash erosion in an induced draft fan"

F. Stella (2012) "Numerical study of vortex structure generation in hybrid rocket motors"

P. Gasbarri (2012) "OPERATIONAL MODAL ANALYSIS VIA IMAGE BASED TECHNIQUE OF VERY FLEXIBLE SPACE STRUCTURES"

F. GAMMA (2012) "Off-Design Performances of a Gas Turbine Engine with Heat Recovery and Intercooling"

Francesco Nasuti (2012) "On the Onset of Heat Transfer Deterioration in Supercritical Coolant Flow Channels"

A. Corsini (2012) "On the Role of Leading-Edge Bumps in the Control of Stall On-Set in Axial Fan Blades"

F. Costantino (2012) "On the use of Quality Function Deployment (QFD) for the identification of risks associated to warranty programs"

A. Zavoli, G. Colasurdo (2012) "Optimal cooperative deployment of a two-satellite formation into a highly elliptic orbit"

F. Costantino, G. Di Gravio (2012) "Ordering Policies Based on Information Sharing to Mitigate the Severity of Supply Chain Disruption"

F. Nasuti (2012) "Parametric Analysis of Heat Transfer to Supercritical Pressure Methane"

F. Gamma (2012) "Parametric Analysis of Inter-cooled and Recuperated Aero Engine"

Francesco Nasuti (2012) "Parametric analysis of cooling properties of candidate expander cycle fuels"

N.P. Belfiore, R. Crescenzi (2012) "Performance Analysis of Compliant MEMS Parallel Robots Through Pseudo-Rigid-Body Model Synthesis"

A. Corsini, F. Rispoli, P. Venturini (2012) "Performance of a common-rail Diesel Engine fuelled with rapeseed and waste cooking oils"

F.Piergentili (2012) "Plastic CubeSat for Micropropulsion and Active Debris Removal Test"

F. Barbaglio, L. Iess (2012) "Precise doppler measurements for navigation and planetary geodesy using low gain antennas: test result from Cassini"

M. Pizzarelli, F. Nasuti, M. Onofri (2012) "Prediction of wall thermal behavior in regeneratively-cooled thrust chamber"

Enrico Cavallini, Bernardo Favini (2012) "Pressure Oscillations Numerical Simulation in Solid Rocket Motors"

F. Costantino, G. Di Gravio (2012) "Production scheduling on multiple lines with shared resources"

M. Tronci (2012) "Product’s life cycle modelling for eco-designing product-service systems"

Enrico Cavallini, Daniele Bianchi, Bernardo Favini (2012) "Propellant Effects on SRM Upper Stage Internal Ballistics and Performance with Nozzle Erosion Characterization"

A. Sestieri (2012) "Pseudo dampers for squeal mitigation"

Daniele Bianchi, Francesco Nasuti, Marcello Onofri (2012) "Radius of curvature effects on throat thermochemical erosion in solid rocket motors"

L. Marino (2012) "Rarefied gas flow through porous media: Experiments and numerical simulation"

Renato Paciorri (2012) "Recognition of shock-wave patterns from shock-capturing solutions"

Fabrizio Piergentili (2012) "Redemption: A student experiment proposing a solution to Active Debris Removal"

A. Culla, D. Tonazzi, F. Massi, A. Fregolent (2012) "Response surface model of a brake system to optimize structural modifications for squeal noise suppression"

Fabrizio Piergentili (2012) "Rocket body rotational state estimation by remote optical observations"

Fulvio Stella (2012) "Roll torque prediction in SRM: Practical applications"

F.Piergentili (2012) "Rotational state evaluation of cylindrical shape orbiting objects through light curve analysis and Polyurethanic foam for capture and de-orbiting"

G. Graziani (2012) "SPH modelling of viscous flows around cylinders from re=10 to Re=1000"

M. Gregnanin, L. Iess (2012) "Same beam interferometry for the analysis of the internal structure of celestial bodies"

Paolo Gasbarri (2012) "Second order effects of the flexibility on the control of a spacecraft full-coupled model"

A. Carcaterra (2012) "Self-Excitation of Electro-Mechanical Resonators: Nano-Mechanical Transistor"

P. Venturini, D. Lentini, F. Rispoli (2012) "Soot prediction in a turbulent methane/air flame accounting for both gas and particulate radiation"

S. Pirozzoli, M. Bernardini (2012) "Stability and modal analysis of shock/boundary layer interactions"

A. Corsini (2012) "Stall Control and Recovery in a Low Speed Axial Fan Through the use of Variable Pitch in Motion Blades"

N.Roveri, A.Carcaterra (2012) "Structural health monitoring of time-varying systems by output-only identification"

G.B. Broggiato, G. Santucci (2012) "Studio del tensionamento dei dipinti mediante misure ottiche e analisi FEM"

A. Fregolent (2012) "Substructure decoupling on an experimental test bed"

G. Coppotelli (2012) "System identification of a reduced scale model blade with an adaptive pitch link using whirl tower test data"

R. Capata, E. Sciubba, C. Toro (2012) "THE GAS TURBINE HYBRID VEICHLE LETHE@ AT UDR1: THE ON-BOARD INNOVATIVE ORC ENERGY RECOVERY SYSTEM – FEASIBILITY ANALYSIS"

N. Roveri, A. Carcaterra (2012) "Targeted energy pumping using a linear complex attachment"

A. Corsini, F. Rispoli (2012) "The Impact of Blade Erosion on the Induced-Draft Boiler Fan Aerodynamic Performance and Stall Margin Ventilation"

R. Capata, E. Sciubba (2012) "The LETHE CITY CAR of the University of Roma 1: Final proposed configuration"

M. Ducci, L. Iess, P. Racioppa (2012) "The geodesy of the main Saturnian satellites from range rate measurements of the Cassini spacecraft"

Fabrizio Piergentili (2012) "The loiano campaigns for photometry and spectroscopy of geosynchronous objects"

Battista F (2012) "Thermophoresis in particle laden flames"

P. Gualtieri, C.M. Casciola (2012) "Transport of inertial particles in turbulent jets"

Capata R, Sciubba E (2012) "USE OF MODIFIED BALJE MAPS IN THE DESIGN OF LOW REYNOLDS NUMBER TURBOCOMPRESSORS"

A. Carcaterra (2012) "Uncertainty and Dissipation"

D. Borello, G. Delibra (2012) "Unsteady CFD analysis of turbulent flow and heat transfer in a gas turbine blade trailing edge subjected to rotation"

P. Gasbarri (2012) "Very Large Space Structures: Non-Linear Control and Robustness to Structural uncertainties"

A. Carcaterra (2012) "Vibration-based Nano-Mechanical Transistor: Theoretical Modelling and Numerical Simulations"

A. Sestieri, A. Carcaterra (2012) "Vibroacoustics: the challenges of a mission impossible?"

M. Di Bartolomeo, F. Massi, A. Culla, A. Fregolent (2012) "Wave generation and propagation at frictional bimaterial sliding interfaces"

A. Bardazzi, G. Graziani (2012) "Wave-impact in a sloshing tank: hydroelastic challenges"

L. Marino, G.P. Romano (2012) "Aeroacoustics of free and impinging jets"

N.P. Belfiore (2012) "An approach for modeling the influence of wheel tractor loads and vibration frequencies on soil compaction"

Cappa P (2012) "EXPERIMENTAL ASSESMENT OF THE EFFECT OF MAGNETIC DISTORTION ON MIMU GAIT ANALISYS"

Cappa P (2012) "EXPERIMENTAL VALIDATION OF A SENSOR TO SEGMENT CALIBRATION PROCEDURE FOR MIMU BASED GAIT ANALYSIS"

P. Cappa (2012) "REALIZZAZIONE DI UNA PEDANA RIABILITATIVA SENSORIZZATA PER PAZIENTI IN ETÀ PEDIATRICA"

Ancillao A (2012) "Recupero della performance del cammino con robot per arto inferiore end effector GEO nelle persone con malattia di Parkinson: dati preliminari"

F. Costantino, G. Di Gravio (2012) "Simulation model to analyze bullwhip effect under classical and information sharing ordering policies"

Francesco Creta (2012) "The effect of the Darrieus-Landau instability on statistically planar turbulent flames"

C.M. Casciola (2012) "Wetting rough surfaces: stability of the Cassie and Wenzel states"

Ancillao A (2012) "inite element analysis of the stress state produced by an orthodontic skeletal anchorage system based on miniscrews"

Ancillao A (2012) "Analisi agli elementi finiti dello sforzo prodotto da un sistema ortodontico ad ancoraggio scheletrico. "

Battista F (2012) "Direct Numerical Simulation of CO-H2 Premixed Turbulent Flame"

Battista F (2012) "Front Evolution and Flame Stretch in a Turbulent Premixed Bunsen Flame"