IL PORTALE per la RICERCA dei DIPARTIMENTI

Carola Esposito Corcione, Raffaella Striani, Mariaenrica Frigione (2013) " Microgel modified UV- cured methacrylic – silica hybrid: synthesis and characterization"

Carola Esposito Corcione, Mariaenrica Frigione (2013) " Surface Characterization of Novel HydrophobicUV-Vurable Siloxane-Modified Methacrylate/Boehmite Nanocomposites"

Maria Grazia Gnoni, Serena Andriulo (2013) ""Lean occupational’’ safety: An application for a Near-miss Management System design."

M. De Vittorio (2013) "2D plasmonic gold nano-patches for linear and nonlinear applications"

F. Congedo, G. Monti, L. Tarricone (2013) "A 2.45-GHz Vivaldi Rectenna for the Remote Activation of an End Device Radio Node"

Spagnolo A (2013) "A 7.65mW 5bit 90nm 1Gs/s Folded Interpolated ADC Without Calibration"

Giuseppe Cannazza, Andrea Cataldo, Egidio De Benedetto (2013) "A Comparative Analysis Between Customized and Commercial Systems for Complex Permittivity Measurements on Liquid Samples at Microwave Frequencies"

Greco A., Maffezzoli A. (2013) "A Comparative Study Between Bio-composites Obtained with Opuntia ficus indica Cladodes and Flax Fibers"

A. LAY EKUAKILLE, P.VERGALLO (2013) "A Hybrid FDTD/SEM Model for Accurate Analysis of Time-Domain Radiation Properties of Antenna-Based Sensors"

A. LAY EKUAKILLE, P. VERGALLO (2013) "A Robust Algorithm based on DPA Technique for Processing Sensor Data in Leak detection in Waterworks"

A. Lay Ekuakille (2013) "A Robust Polynomial Filtering Framework for Mammographic Image Enhancement from Biomedical Sensors"

Stefano D'Amico (2013) "A Single-Branch Third-Order Pole–Zero Low-Pass Filter With 0.014-mm2 Die Size and 0.8-kHz (1.25-nW) to 0.94-GHz (3.99-mW) Bandwidth–Power Scalability"

Gianluca Quarta, Lucio Calcagnile, Lucio Maruccio (2013) "A combined PIXE–PIGE approach for the assessment of the diagenetic state of cremated bones submitted to AMS radiocarbon dating"

Andrea Cataldo (2013) "A critical analysis of the sustainability of mobile phone use"

M. G. Gnoni (2013) "A feasibility study of a RFID traceability system in municipal solid waste management"

D. De Donno, L. Catarinucci, L. Tarricone (2013) "A long-range computational RFID tag for temperature and acceleration sensing applications"

Roberta Del Sole, Sonia Scorrano, Giuseppe Vasapollo (2013) "A molecularly imprinted polymer for the determination of neopterin"

Gianpiero Colangelo, Ernani Favale, Arturo de Risi, Domenico Laforgia (2013) "A new solution for reduced sedimentation flat panel solar thermal collector using nanofluids"

A. Coluccia, F. Ricciato (2013) "A software-defined radio tool for experimenting with RSS measurements in IEEE 802.15.4: implementation and applications"

Monti G (2013) "A three-band t-junction power divider based on artificial transmission lines"

A. Cataldo, G. Cannazza, E. De Benedetto (2013) "Acquedotto Pugliese utilizza le microonde per la ricerca perdite"

G. Avanzini (2013) "Acquisition of a Desired Pure-Spin Condition for a Magnetically Actuated Spacecraft"

A. Lay Ekuakille (2013) "An Efficient Cardiac Signal enhancement using Time-Frequency Realization of leaky Adaptive Noise Cancelers for Remote heath monitoring systems"

CATARINUCCI L., GUGLIELMI S., MAINETTI L., MIGHALI V., PATRONO L., STEFANIZZI M.L., TARRICONE L. (2013) "An Energy-Efficient MAC Scheduler based on a Switched-Beam Antenna for Wireless Sensor Networks"

Giovanni Indiveri (2013) "An Outlier Robust Filter for Maritime Robotics Applications"

CATARINUCCI L., COLELLA R., MAINETTI L., MIGHALI V., PATRONO L., SERGI I., TARRICONE L. (2013) "An RFID tracking system supporting the behavior analysis of colonial laboratory animals"

MAINETTI L., PATRONO L., STEFANIZZI M.L., VERGALLO R. (2013) "An RFID-Based Tracing and Tracking System for the Fresh Vegetables Supply Chain"

D. De Donno, L. Catarinucci, L. Tarricone (2013) "An UHF RFID energy-harvesting system enhanced by a DC-DC charge pump in silicon-on-insulator technology"

M. G. De Giorgi, A. Ficarella (2013) "An artificial neural network approach to investigate cavitating flow regime at different temperatures"

A. Cataldo, G. Cannazza, E. De Benedetto (2013) "An electromagnetic-based method for pinpointing leaks in buried pipes: a practical validation"

G. Starace (2013) "An enhanced model for the design of Diffusion Absorption Refrigerators"

M.G.Gnoni, V.Elia (2013) "An environmental sustainability analysis in the printing sector"

MAINETTI L., PATRONO L., STEFANIZZI M.L., VERGALLO R. (2013) "An innovative and low-cost gapless traceability system of fresh vegetable products using RF technologies and EPCglobal standard"

Alfonso Maffezzoli, Francesca Lionetto (2013) "An overview of progress and current challenges in ultrasonic treatment of polymer melts"

P. Cavaliere (2013) "Analysis of dangerous emissions and plant productivity during sintering ore operations"

P. Bocchetta (2013) "Anodic Electro Deposition of CeO2 and Co-Doped CeO2 Thin Films"

Alessandro Romano (2013) "Anti-Aggregating Effect of the Naturally Occurring Dipeptide Carnosine on Aß1-42 Fibril Formation"

Micelli F. (2013) "Assessment of the effective stiffness in R/C frames subjected to seismic loads""

G. Cocciolo (2013) "Bounds on the density of sources of ultra-high energy cosmic rays from the Pierre Auger Observatory "

P. Vergallo, A. Lay Ekuakille (2013) "Brain Source Localization: A New Method Based on Music Algorithm and Spatial Sparsity"

N. LOVERGINE (2013) "Built-in elastic strain and localization effects on GaAs luminescence of MOVPE-grown GaAs-AlGaAs core-shell nanowires"

Donateo T (2013) "CO2 Impact of Intelligent Plug-in Vehicles"

T. Donateo, D. Laforgia (2013) "COMPUTER- AIDED CONVERSION OF AN ENGINE FROM DIESEL TO METHANE"

G. Cocciolo (2013) "CONSTRAINTS ON THE ORIGIN OF COSMIC RAYS ABOVE 1018eV FROM LARGE-SCALE ANISOTROPY SEARCHES IN DATA OF THE PIERRE AUGER OBSERVATORY"

Luigi Spedicato, Nicola Ivan Giannoccaro, Giulio Reina, Mauro Bellone (2013) "Clustering and PCA for Reconstructing Two Perpendicular Planes Using Ultrasonic Sensors"

G. Parlangeli (2013) "Collaborative diagnosis and compensation of misbehaving nodes in acyclic consensus networks: Analysis and algorithms"

M. SCARAGGI (2013) "Contact electrification and the work of adhesion"

Giuseppe Grassi (2013) "Continuous-time chaotic systems: Arbitrary full-state hybrid projective synchronization via a scalar signal"

Giuseppe Notarstefano, Gianfranco Parlangeli (2013) "Controllability and Observability of Grid Graphs via Reduction and Symmetries"

CInnella P (2013) "Convergence behaviours of Genetic Algorithms for Aerodynamic Optimisation Problems"

Francesco Micelli, Maria Antonietta Aiello (2013) "Crack width prediction of FRC beams in short and long term bending condition"

Giulio Reina (2013) "Cross-coupled control for all-terrain rovers"

G. Napoli (2013) "Curvature-induced ordering in cylindrical nematic shells"

L. Catarinucci, L. Tarricone (2013) "Customized Ultra High Frequency Radio Frequency Identification Tags and Reader Antennas Enabling Reliable Mobile Robot Navigation"

Angelo Corallo, Maria Elena Latino, Mariangela Lazoi, Serena Lettera (2013) "Defining Product Lifecycle Management: A Journey across Features, Definitions, and Concepts"

Lucio Calcagnile, Gianluca Quarta, Lucio Maruccio (2013) "Design features of the new multi isotope AMS beamline at CEDAD"

PELLICANO' D (2013) "Design of Buoy Station for Marine Pollutant Detection"

Gianluca Quarta, Lucio Calcagnile, Eugenia Braione (2013) "Determination of the Biobased Content in Plastics by Radiocarbon"

Lucio Calcagnile, Gianluca Quarta (2013) "Determining 14C content in different human tissues: Implications for application of 14C bomb-spike dating in forensic medicine"

G. Secundo, G. Passiante (2013) "Developing the Next Generation of Engineers for Intelligent and Sustainable Manufacturing: A Case Study"

F. Paladini, M. Pollini (2013) "Development of antibacterial and antifungal silver-coated polyurethane foams as air filtration units for the prevention of respiratory diseases"

N. LOVERGINE (2013) "Direct measurement of band edge discountinuity in individual core-shell nanowires by photocurrent spectroscopy"

F. Bandiera, G. Ricci (2013) "Direction detector for distributed targets in unknown noise and interference"

A. Coluccia, F. Ricciato (2013) "Distribution-based anomaly detection via generalized likelihood ratio test: A general Maximum Entropy approach"

Snijkers F (2013) "Double Stress Overshoot in Start-Up of Simple Shear Flow of Entangled Comb Polymers"

Riccardo Nobile (2013) "Dynamic behavior of new aluminum-steel energy dissipating devices"

Paolo Maria Congedo (2013) "Edifici a consumo quasi zero per regioni calde"

M. Pollini (2013) "Effect of silver nanocoatings on catheters for haemodialysis in terms of cell viability, proliferation, morphology and antibacterial activity"

Gaetano Napoli (2013) "Effective free energies for cholesteric shells"

A. Lay-Ekuakille (2013) "Efficient Signal Conditioning techniques for Brain activity in Remote Health Monitoring Network"

Scaraggi M. (2013) "Elastic contact of rough surfaces: A simple criterion to make 2D isotropic roughness equivalent to 1D one"

Gaetano Napoli (2013) "Electric-Field--Induced Density Modulations in a Nematic Liquid Crystal Cell"

A. Ficarella (2013) "Electrical Resistivity Measures in Cohesive Soils for the Simulation of an Integrated Energy System Between CCS and Low-Enthalpy Geothermal"

Massimo De Vittorio (2013) "Electrical coupling of mammalian neurons to microelectrodes with 3D nanoprotrusions"

Massimo De Vittorio (2013) "Electrical response from nanocomposite PDMS–Ag NPs generated byin situlaser ablation in solution"

C. Mele, B. Bozzini (2013) "Electrochemical fabrication of NPG-supported manganese oxide nanowires based on electrodeposition from eutectic urea/choline chloride ionic liquid "

C. Mele, B. Bozzini (2013) "Electrochemical fabrication of nanoporous gold-supported manganese oxide nanowires based on electrodeposition from eutectic urea/choline chloride ionic liquid"

P. Bocchetta (2013) "Electrodeposition of CeO2 and Co-Doped CeO2 Nanotubes by Cyclic Anodization in Porous Alumina Membranes"

Antonio Licciulli, Sanosh K.P (2013) "Electrospun continuous nanofibers based on TiO2-ZnO-Graphene composite"

Donato Cafagna, giuseppe Grassi (2013) "Elegant Chaos in Fractional-Order System without Equilibria"

A. Iacovazzi A. D’Alconzo F. Ricciato M. Burkhart (2013) "Elementary secure-multiparty computation for massive-scale collaborative network monitoring: A quantitative assessment"

Dattoma T (2013) "Emission and Transmission Properties of a Doubly Resonant 3D Nanodisk Yagi–Uda Antenna for Wireless Optical Communications"

A. LAY EKUAKILLE, P. VERGALLO (2013) "Empirical Mode Decomposition vs. Wavelet Decomposition for the extraction of respiratory signal from single-channel ECG: a comparison"

L. Catarinucci, R. Colella, L. Tarricone (2013) "Enhanced UHF RFID sensor-tag"

Giuseppe Mele (2013) "Enhanced photocatalytic degradation of rhodamine B by surface modification of ZnO with copper (II) porphyrin under both UV–vis and visible light irradiation"

De Giorgi M.G., Ficarella A. (2013) "Evaluating cavitation regimes in an internal orifice at different temperatures using frequency analysis and visualization"

V.Dattoma (2013) "Evaluation of energy of fatigue damage into GFRC through digital image correlation and thermography"

E. Alfinito (2013) "Evidence of Gumbel distributions..."

Francesca Lionetto, Mariaenrica Frigione (2013) "Evolution of transient states and properties of an epoxy–silica hybrid cured at ambient temperature"

A. LAY EKUAKILLE (2013) "Experimental Infrared Measurements for Hydrocarbon Pollutant Determination in Subterranean Waters"

N.I. Giannoccaro, L. Spedicato (2013) "Exploratory data analysis for robot perception of room environments by means of an in-air sonar scanner"

Maria Macchia, Gianluca Quarta, Lucio Maruccio, Lucio Calcagnile (2013) "Extraction of dissolved inorganic carbon (DIC) from seawater samples at cedad: Results of an intercomparison exercise on samples from Adriatic sea shallow water"

C. Mele, B Bozzini (2013) "Fabrication and testing of an electrochemical microcell for in situ soft X-ray microspectroscopy measurement"

M. De Vittorio (2013) "Fabrication of doubly resonant plasmonic nanopatch arrays on graphene"

F. Palano, R. Nobile, V. Dattoma, F.W. Panella (2013) "Fatigue behaviour of aluminium foam sandwiches"

G. Ciccarella (2013) "Fluorine-thiophene-substituted organic dyes for dye sensitized solar cells"

Scaraggi M. (2013) "Friction Properties of Lubricated Laser-MicroTextured-Surfaces: An Experimental Study from Boundary- to Hydrodynamic-Lubrication"

Ignazio Ciufolini (2013) "Fundamental Physics and General Relativity with the LARES and LAGEOS satellites"

A. E. Morabito (2013) "Fuzzy sets for geometric shape recognition in triangular meshes"

Giuseppina Monti, Luciano Tarricone, Massimo De Vittorio (2013) "GHz properties of magnetophoretically aligned iron-oxide nanoparticle doped polymers"

D. De Donno, A. Esposito, G. Monti, L. Catarinucci, L. Tarricone (2013) "GPU-Based Acceleration of Computational Electromagnetics Codes"

A. Carofalo, M. De Giorgi, A.E. Morabito (2013) "Geometric modelling of metallic foams"

Giuseppe Mele (2013) "Grain Size Control of the Magnetic Nanoparticles by Solid State Route Modification"

Massimo De Vittorio (2013) "Highly luminescent, flexible and biocompatible cadmium-based nanocomposites"

Gervaso F (2013) "How Do Cord Compressions Affect the Umbilical Venous Flow Resistance? An In Vitro Investigation of the Biomechanical Mechanisms"

Snijkers F (2013) "Hydrodynamic Interactions between Two Equally Sized Spheres in Viscoelastic Fluids in Shear Flow"

G. Cocciolo (2013) "Identifying clouds over the Pierre Auger Observatory using infrared satellite data"

MAINETTI L., PATRONO L., STEFANIZZI L. (2013) "Implementation and Validation of a new Protocol Stack Architecture for Embedded Systems"

Resta V (2013) "In situ growth of well-dispersed CdS nanocrystals in semiconducting polymers"

M. Pollini (2013) "In vivo testing of silver treated fibers for the evaluation of skin irritation effect and hypoallergenicity"

A. LAY EKUAKILLE (2013) "Incremental Bayesian Learning for In-Service Analysis of Aeronautic Composites"

A. Greco, M. Frigione (2013) "Influence of Natural and Accelerated Weathering on Performances of Photoselective Greenhouse Films"

P.Leo (2013) "Influence of high temperature thermal treatment on grain stability and mechanical properties of medium strength aluminium alloy friction stir welds"

Scalera F, Gervaso F, Sannino A, Licciulli A (2013) "Influence of the calcination temperature on morphological and mechanical properties of highly porous hydroxyapatite scaffolds"

Petti C. (2013) "Innovazione in Cina: chi è il vero imprenditore?"

Maria Grazia Gnoni (2013) "Integrating major accidents hazard into occupational risk assessment: An index approach"

G. Cocciolo (2013) "Interpretation of the depths of maximum of extensive air showers measured by the Pierre Auger Observatory"

I. Ciufolini (2013) "LARES mette alla prova Einstein e teorie cosmologiche"

Ignazio Ciufolini (2013) "LARES successfully launched in orbit: Satellite and mission description"

D. De Donno, F. Ricciato, L. Tarricone (2013) "Listening to Tags: Uplink RFID Measurements With an Open-Source Software-Defined Radio Tool"

Calcagnile Lucio, Quarta Gianluca (2013) "Lo strano caso della mummia di Ankhpakhered: datazione al radiocarbonio di campioni organici"

Francesco Micelli, Maria Antonietta Aiello (2013) "Long term behavior of FRC flexural beams under sustained load"

A. LAY EKUAKILLE, P. VERGALLO (2013) "Low-Frequency Detection in ECG Signals and Joint EEG-Ergospirometric Measurements for Precautionary Diagnosis"

Giuseppe Mele (2013) "MZnFe2O4 (M = Ni, Mn) cubic superparamagnetic nanoparticles obtained by hydrothermal synthesis"

Giuseppe Mele (2013) "Magnetic nanoparticles coated with anacardic acid derived from cashew nut shell liquid"

G. Avanzini (2013) "Maximum range for battery-powered aircraft"

C. Esposito Corcione, M. Frigione (2013) "Measurements of Size Distribution Nanoparticles in Ultraviolet-Curable Methacrylate-Based Boehmite Nanocomposites"

Grippa F. (2013) "Measuring creative performance of teams through dynamic semantic social network analysis"

M. Pollini (2013) "Metal nanoantimicrobials for textile applications"

Angelo Corallo, Maria Elena Latino (2013) "Methodology for User-Centered Innovation in Industrial Living Lab"

Antonio Greco, Alfonso Maffezzoli (2013) "Micro- and macro-impregnation of fabrics using thermoplastic matrices"

Avanzini G (2013) "Model predictive control architecture for rotorcraft inverse simulation"

Massimo De Vittorio (2013) "Modeling, fabrication and characterization of micro-coils as magnetic inductors for wireless power transfer"

A. de Risi, M. Milanese, D. Laforgia (2013) "Modelling and Optimization of Transparent Parabolic Trough Collector Based on Gas-Phase Nanofluids"

Massimo Pacella (2013) "Monitoring and diagnosis of multichannel nonlinear profile variations using uncorrelated multilinear principal component analysis"

Francesca Lionetto, Alfonso Maffezzoli (2013) "Monitoring the Cure State of Thermosetting Resins by Ultrasound"

I. Ciufolini (2013) "Monte Carlo Simulations of the LARES space experiment to test General Relativity and fundamental physics"

Snijkers F (2013) "Multi-responsive physical gels formed by a biosynthetic asymmetric triblock protein polymer and a polyanion"

A. Lay Ekuakille, P. Vergallo (2013) "Multispectrum Approach in Quantitative EEG: Accuracy and Physical Effort"

G. R. Tomasicchio, F. D’Alessandro (2013) "Multivariate approach to design coastal and off-shore structures"

CATARINUCCI L., COLELLA R., MAINETTI L., MIGHALI V., PATRONO L., SERGI I., TARRICONE L. (2013) "Near Field UHF RFID Antenna System Enabling the Tracking of Small Laboratory Animals"

Francesco Micelli (2013) "Near-surface mounted flexural strengthening of reinforced concrete beams with low concrete strength"

Giuseppe Mele, Anna Scarlino, Ermelinda Bloise, Roberta Del Sole, Giuseppe Vasapollo (2013) "New Porphyrin/Fe-Loaded TiO2 Composites as Heterogeneous Photo-Fenton Catalysts for the Efficient Degradation of 4-Nitrophenol"

Massimo De Vittorio (2013) "Non-Blinking Single-Photon Generation with Anisotropic Colloidal Nanocrystals: Towards Room-Temperature, Efficient, Colloidal Quantum Sources"

A. LAY EKUAKILLE, P. VERGALLO (2013) "Non-Invasive Reflectometry-Based Detection of Melanoma by Piezoelectric Micro-Needle Antenna Sensors"

Maria Antonietta Aiello (2013) "Non-destructive techniques to assess mechanical and physical properties of soft calcarenitic stones "

G. Ciccarella (2013) "Nonhydrolytic Route to Boron-Doped TiO2 Nanocrystals"

Mariaenrica Frigione, Francesca Lionetto (2013) "Novel epoxy-silica hybrid adhesives for concrete and structural materials: properties and durability issues"

G. Monti, F. Congedo, L. Tarricone (2013) "Novel planar antenna with a broadside radiation"

Angelo Coluccia (2013) "On the Expected Value and Higher-Order Moments of the Euclidean Norm for Elliptical Normal Variates"

Reina G. (2013) "On the Mobility of All-Terrain Rovers"

P. Cinnella (2013) "On the design of high order residual-based dissipation for unsteady compressible flows"

A. Perulli (2013) "On the spatial inhomogeneity of charge generation and collection in inverted all polymer solar cells"

L. Catarinucci, R. Colella, L. Patrono (2013) "On the use of passive UHF RFID tags in the pharmaceutical supply chain: a novel enhanced tag versus high-performance commercial tags"

Bocchetta P. (2013) "One-step electrochemical synthesis and physico-chemical characterization of CdSe nanotubes"

M. Milanese, A. de Risi (2013) "Optical Absorption Measurements at High Temperature (500 °C) of Oxide Nanoparticles for Application as Gas-Based Nanofluid in Solar Thermal Collector Systems"

V. Resta, L. Calcagnile, G. Quarta, L. Maruccio (2013) "Optical and electrical properties of polycarbonate layers implanted by high energy Cu ions"

Giuseppe Mele (2013) "Oxidation-proof microemulsions: Microstructure and reactivity in the presence of dioxiranes"

Massimo De Vittorio (2013) "Parylene conformal coating encapsulation as a method for advanced tuning of mechanical properties of an artificial hair cell"

CATARINUCCI L., COLELLA R., MAINETTI L., MIGHALI V., PATRONO L., SERGI I., TARRICONE L. (2013) "Performance Evaluation of a Novel Animals Tracking System based on UHF RFID Technology"

MAINETTI L., PATRONO L., STEFANIZZI M.L. (2013) "Performance Evaluation of an Energy-Efficient MAC Scheduler by using a Test Bed Approach"

Congedo P.M., Malvoni M., De Giorgi M.G. (2013) "Performance measurements of monocrystalline silicon PV modules in South-eastern Italy"

Elia Valerio, Gnoni (2013) "Pervasiveness of RFID technology: A survey based on case studies analysis"

E. Alfinito (2013) "Photoreceptors for a light biotransducer:..."

Pacella M. (2013) "Point set augmentation through fitting for enhanced ICP registration of point clouds in multisensor coordinate metrology"

G. Mele (2013) "Porphyrin synthesized from cashew nut shell liquid as part of a novel superparamagnetic fluorescence nanosystem"

Demitri C, Scalera F, Madaghiele M, Sannino A, Maffezzoli A (2013) "Potential of cellulose-based superabsorbent hydrogels as water reservoir in agriculture"

A. P. Carlucci, A. Ficarella, D. Laforgia (2013) "Potentialities of a Common Rail Injection System for the Control of Dual Fuel Biodiesel-Producer Gas Combustion and Emissions"

M. Cafaro, G. Aloisio (2013) "Preference-based Matchmaking of Grid Resources With CP-Nets"

G. Scarselli (2013) "Preliminary Optimization of the Sonic Boom Properties for Civil Supersonic Aircraft "

I. Ciufolini (2013) "Preliminary study for the measurement of the Lense-Thirring effect with the Galileo satellites"

C. Demitri, M. Madaghiele, A. Sannino (2013) "Preparation and characterization of cellulose-based foams via microwave curing"

Antonio Greco, Alfonso Maffezzoli (2013) "Processing and Properties of a Polymer/Composite Double-Layer Laminate"

M. Frigione (2013) "Protective effect of microbial calcite precipitation on the surface of cementitious materials"

A. Romano (2013) "Protein cold adaptation strategy via a unique seven-amino acid domain in the icefish (Chionodraco hamatus) PEPT1 transporter"

F. Ricciato (2013) "Pseudo-random Aloha for Enhanced Collision-recovery in RFID"

Resta V (2013) "Pulsed laser deposition of a dense and uniform Au nanoparticles layer for surface plasmon enhanced efficiency hybrid solar cells"

Gianluca Quarta, Lucio Calcagnile (2013) "Radiocarbon Dating of Mortars from the Baptismal Font of the San Lorenzo Cathedral of Alba (Cuneo, Italy): Comparison with the Thermoluminescence Dating of Related Bricks and Pipes"

Gianluca Quarta, Maria Macchia, Lucio Calcagnile (2013) "Radiocarbon Dating the Exploitation Phases of the Grotta della Monaca Cave in Calabria, Southern Italy: A Prehistoric Mine for the Extraction of Iron and Copper"

Monti G (2013) "Radiofrequency characterization of polydimethylsiloxane – iron oxide based nanocomposites"

Sanosh Kunjalukkal Padmanabhan, Antonio Licciulli (2013) "Rapid synthesis and characterization of silicon substituted nano hydroxyapatite using microwave irradiation"

N.I.Giannoccaro, L.SPedicato (2013) "Reconstruction of different material planes forming a right angle by means of ultrasonic sensors."

Angelo Coluccia (2013) "Reduced-Bias ML-Based Estimators with Low Complexity for Self-Calibrating RSS Ranging"

Giulio Avanzini (2013) "Refined dynamical analysis of multi-tethered satellite formations"

Angelo Coluccia (2013) "Rethinking Stream Ciphers: Can Extracting be Better than Expanding?"

C. Maruccio, L. De Lorenzis (2013) "Rolling particle lithography by soft polymer microparticles"

I. Ciufolini (2013) "Satellite probing General Relativity and its extensions and Kolmogorov analysis"

N. I. Giannoccaro (2013) "Self-Tuning PI Control using Adaptive PSO of a Web Transport System with Overlapping Decentralized Control"

Paladini F (2013) "Silver-doped self-assembling Di-Phenylalanine hydrogels as wound dressing biomaterials."

Gianpaolo Ghiani, Emanuela Guerriero, Emanuele Manni (2013) "Simultaneous personnel and vehicle shift scheduling in the waste management sector"

C. Triki (2013) "Solution Methods for the Periodic Petrol Station Replenishment Problem"

P. Vergallo, A. Lay Ekuakille (2013) "Sparsity of the Field Signal-Based Method for Improving Spatial Resolution in Antenna Sensor Array Processing"

B. Bozzini (2013) "Spatio-temporal organization in alloy electrodeposition: a morphochemical mathematical model and its experimental validation"

Eleonora Imperio (2013) "Spectral Database for Postage Stamps by Means of FT-IR Spectroscopy"

P. Cinnella (2013) "Spectral properties of high-order residual-based compact schemes for unsteady compressible flows"

Sudipto Pal, Antonio Licciulli (2013) "Spectrally selective absorber coating from transition metal complex for efficient photothermal conversion"

B. Bozzini, C. Mele (2013) "Spectroelectrochemical study of the electro-oxidation of ethanol on WC-supported Pt – Part III: Monitoring of electrodeposited-Pt catalyst aging by in situ Fourier transform infrared spectroscopy, in situ sum Frequency generation spectroscopy and ex situ photoelectron spectromicroscopy."

G. Ciccarella (2013) "Spray coating fabrication of organic solar cells bypassing the limit of orthogonal solvents"

Snijkers F (2013) "Start-up and relaxation of well-characterized comb polymers in simple shear"

Claudio Petti (2013) "State-of-the-Art Research on Technology Innovation Management in China"

A. de Risi, M.Milanese, M. Potenza, D. Laforgia (2013) "Studio numerico di un collettore parabolico lineare trasparente basato sull’impiego di nanofluidi a basa gassosa"

P. Leo (2013) "Studio sul comportamento all'ossidazione ad alta temperatura di rivestimenti di CoCrTaAlY + 10 wt.% Al2O3 depositati con tecnologia HVOF su superlega di nichel"

M. De Vittorio (2013) "Surface-enhanced Raman scattering from finite arrays of gold nano-patches"

Romano A. (2013) "Surveillance of human influenza A (H3N2) virus from 1999 to 2009 in southern Italy"

L. Catarinucci, S. Guglielmi, L. Patrono, L. Tarricone (2013) "Switched-beam antenna for wireless sensor network nodes"

Sanosh Kunjalukkal Padmanabhan, Antonio Licciulli (2013) "Synthesis and characteristics of fly ash and bottom ash based geopolymers–A comparative study"

Giuseppe Vasapollo (2013) "Synthesis of Alcohols via a Rhodium Catalyzed Hydroformylation Reduction Sequence using Tertiary Bidentate Amine Ligands"

G. Cocciolo (2013) "Techniques for measuring aerosol attenuation using the Central Laser Facility at the Pierre Auger Observatory"

Claudio Petti (2013) "Technological entrepreneurship and absorptive capacity in Guangdong technology firms"

I. Ciufolini (2013) "Testing general relativity with a high-density satellite"

C. Triki (2013) "The Steiner Tree Problem with Delays: a Compact Formulation and Reduction Procedures"

C. Triki (2013) "The Stochastic Bid Generation Problem in Combinatorial Transportation Auctions"

Gianluca Quarta, Eugenia Braione, Lucio Maruccio, Lucio Calcagnile (2013) "The Strange Case of the Ankhpakhered Mummy: Results of AMS 14C Dating"

C. Esposito Corcione, A. Maffezzoli (2013) "The aspect ratio of epoxy matrix nanocomposites reinforced with graphene stacks"

MAINETTI L., PATRONO L., STEFANIZZI M.L., VERGALLO R. (2013) "The impact of RF technologies and EPC standard on the fresh vegetables supply chain"

Antonio Greco, Alfonso Maffezzoli (2013) "Thermal and chemical treatments of recycled carbon fibres for improved adhesion to polymeric matrix"

A. Lay Ekuakille, P. Vergallo (2013) "Thin-film-based CdTe PV Module Characterization: Measurements and Energy Prediction Improvement"

Luigi Spedicato, Nicola Ivan Giannoccaro, Giulio Reina, Mauro Bellone (2013) "Three Different Approaches for Localization in a Corridor Environment by Means of an Ultrasonic Wide Beam"

I. Ciufolini (2013) "Time travel, Clock Puzzles and Their Experimental Tests"

Carola Esposito Corcione, Alfonso Maffezzoli (2013) "Transport properties of graphite/epoxy composites: thermal, permeability and dielectric characterization"

Micelli F., Aiello M.A. (2013) "Travi in FRC senza staffatura comportamento fessurativo nella regione a momento costante"

Antonio Greco, Alfonso Maffezzoli (2013) "Two-dimensional and three-dimensional simulation of diffusion in nanocomposite with arbitrarily oriented lamellae"

G. Monti, L. Corchia, L. Tarricone (2013) "UHF Wearable Rectenna on Textile Materials"

Carola Esposito Corcione, Raffaella Striani, Mariaenrica Frigione (2013) "UV-cured siloxane-modified methacrylic system containing hydroxyapatite as potential protective coating for carbonate stones"

De Lorenzis L, Maffezzoli A, Zavarise G (2013) "Ultra-low mass drift chambers"

Perrone D (2013) "Un indice di rischio sismico per le strutture ospedaliere"

Mauro Bellone, Giulio Reina, Nicola Ivan Giannoccaro, Luigi Spedicato (2013) "Unevenness Point Descriptor for Terrain Analysis in Mobile Robot Applications"

Nitti M. (2013) "Using the Hybrid Two-Step estimation approach for the identification of second-order latent variable models"

Corallo A., G. Passiante (2013) "Value Creation for the After-Sales Services: Organizational and Strategic Perspectives"

Paolo Maria Congedo (2013) "Ventilation control using computational fluid-dynamics (CFD) modelling for cultural buildings conservation"

Snijkers F (2013) "Viscoelasticity, Nonlinear Shear Start-up, and Relaxation of Entangled Star Polymers"

G.R. Tomasicchio, F. D’Alessandro (2013) "Wave energy transmission through and over low crested breakwaters"

Giuseppina Monti, Luciano Tarricone, Massimo De Vittorio (2013) "Wireless system for biological signal recording with Gallium Arsenide High Electron Mobility Transistors as sensing elements Microelectronic Engineering"

Kunjalukkal Padmanabhan S (2013) "Wollastonite/Hydroxyapatite Scaffolds with Improved Mechanical, Bioactive and Biodegradable Properties for Bone Tissue Engineering"

T. Donateo (2013) "“An Inter-disciplinary Approach to the Development of a Low-consumption Prototype for the European Shell Eco-marathon"

Luca Catarinucci (2013) "Traceability of Goods by Radio Systems: Proposals, Techniques, and Applications"