IL PORTALE per la RICERCA dei DIPARTIMENTI

Forte P., Paoli A., Razionale A. V. (2013) "A CAE approach for the stress analysis of gear models by 3D digital photoelasticity"

Barone S, Paoli A, Razionale AV (2013) "A Coded Structured Light System Based on Primary Color Stripe Projection and Monochrome Imaging"

Forte Paola (2013) "A Computational Investigation of the Steady State Vibrations of Unbalanced Flexibly Supported Rigid Rotors Damped by Short Magnetorheological Squeeze Film Dampers"

Mengali G, Quarta A (2013) "A Graphical Approach to Electric Sail Mission Design with Radial Thrust"

Chiarelli M (2013) "A New Configuration of Vertical Axis Wind Turbine for a Distributed and Efficient Wind Power Generation System"

Daniela Pedrini, Fabrizio Paganucci, Mariano Andrenucci (2013) "A Reduced-Order Model for Thermionic Hollow Cathodes"

Mattei Lorenza, Di Puccio F, Ciulli E. (2013) "A comparative study of wear laws for soft-on-hard hip implants using a mathematical wear model"

DINI G (2013) "A double-point moving source model for predicting seam geometry in laser welding"

Polacco G. (2013) "A model combining structure and properties of a 160/220 bituminous binder modified with polymer/clay nanocomposites. A rheological and morphological study"

Gualtiero Fantoni, Marco Santochi (2013) "A new capillary gripper for mini and micro parts"

Oliviero F (2013) "A new ultralight amphibious PrandtlPlane: preliminary CFD design of the hull"

Guido Buresti (2013) "A note on the effect of the separation wall in the initial mixing of coaxial jets"

BRAGLIA M, CASTELLANO D, GABBRIELLI R (2013) "A novel game theory based exit selection model in emergency conditions"

GALLETTI C., Tognotti L. (2013) "A novel methodology for chemical time scale evaluation with detailed chemical reaction kinetics"

Losa M., Frendo F. (2013) "A procedure for validating fixed-base driving simulators"

Puccini M., Seggiani M., Vitolo S. (2013) "A technical feasibility study on titanium tanning to obtain upper quality versatile leather"

Seggiani M., Puccini M., Vitolo S. (2013) "Alkali promoted lithium orthosilicate for CO2 capture at high temperature and low concentration"

Beghini M., Santus C. (2013) "An application of the weight function technique to inclined surface cracks under rolling contact fatigue, assessment and parametric analysis"

BENNATI S, VALVO P.S. (2013) "An enhanced beam-theory model of the mixed-mode bending (MMB) test – Part I: literature review and mechanical model"

BENNATI S, VALVO P.S. (2013) "An enhanced beam-theory model of the mixed-mode bending (MMB) test – Part II: applications and results"

BRAGLIA M, CASTELLANO D, FROSOLINI M (2013) "An integer linear programming approach to maintenance strategies selection"

LANDUCCI G, PANNOCCHIA G, NICOLELLA C (2013) "Analysis and simulation of an industrial vegetable oil refining process"

C. Galletti, L. Tognotti (2013) "Analysis of Coal Combustion in Oxy-fuel Conditions through Pulsed Feeding Experiments in an Entrained Flow Reactor"

Bucchi F., Forte P., Frendo F. (2013) "Analysis of differently sized prototypes of an MR clutch by performance indices"

Ambrosini W. (2013) "Analysis of flow stability in nuclear reactor subchannels with water at supercritical pressures"

Ciolini R. (2013) "Analysis of the application of the shadow cone technique for the determination of neutron spectrum with Bonner sphere spectrometer"

Frendo F. (2013) "Analysis of the catastrophic failure of a dockside crane jib"

Piemonte A. (2013) "Applicazione di tecniche topografiche e satellitari per il collaudo di impianti funiviari"

Quarta AA, Mengali G (2013) "Approximate Solutions to Circle-to-Circle Solar Sail Orbit Transfer"

Mengali G., Quarta A. A (2013) "Artificial Equilibrium Points for Electric Sail with Constant Attitude"

Mengali G, Quarta AA (2013) "Artificial Lagrange Points for Solar Sail with Electrochromic Material Panels"

Ambrosini W. (2013) "Assessment of a new model for the linear and nonlinear stability analysis of natural circulation loops with supercritical fluids"

Cristiano Nicolella, TOGNOTTI L. (2013) "Assessment of syngas composition variability in a pilot-scale downdraft biomass gasifier by an extended equilibrium model"

LIPPI F, SALVATORE W (2013) "Assessment of the dynamic and fatigue behaviour of the Panaro railway steel bridge"

G. Landucci (2013) "Assessment of the hazard due to fragment projection: A case study"

G. Fantoni (2013) "Automatic extraction of function-behaviour-state information from patents"

Elisabetta Rosellini (2013) "Biomimetic poly(glycerol sebacate) (PGS) membranes for cardiac patch application"

Mattei G (2013) "Bone scaffolds with homogeneous and discrete gradient mechanical properties"

Michele Lanzetta (2013) "CAD model based virtual assembly simulation, planning and training"

Ambrosini W. (2013) "CFD analysis of the dynamic behaviour of a fuel rod subchannel in a supercritical water reactor with point kinetics"

F. d’Errico, R. Ciolini (2013) "Calibration of PADC-based neutron area dosemeters in the neutron field produced in the treatment room of a medical LINAC"

d'Errico F. (2013) "Clinical simulations of prostate radiotherapy using BOMAB-like phantoms: Results for neutrons"

d'Errico F. (2013) "Clinical simulations of prostate radiotherapy using BOMAB-like phantoms: Results for photons"

VALVO P.S. (2013) "Cohesive failure analysis of an array of IC chips bonded to a stretched substrate"

TOGNOTTI L (2013) "Comparing reaction orders of anthracite chars with bituminous coal chars at high temperature oxidation conditions"

Abul Anam R.C., Lanzetta M. (2013) "Comparing the costs of laser and abrasive water-jet technologies in engraving work on stone / Comparazione dei costi delle tecnologie laser e abrasive waterjet per lavorazioni di incisione su materiali lapidei"

Barone S., Paoli A., RAZIONALE A (2013) "Computer-aided modeling of 3D maxillofacial tissues through multi-modal imaging"

G. Fantoni (2013) "Concept design of new grippers using abstraction and analogy"

BRAGLIA M, GABBRIELLI R (2013) "Consignment stock theory with a fixed batch manufacturing process"

Mengali Giovanni, Quarta Alessandro (2013) "Constrained Large Angle Reorientation Manoeuvres of a Space Telescope Using Potential Functions and a Variable Control Gain"

Gallone G., Polacco G. (2013) "Crack growth behavior of SBR, NR and BR rubber compounds: comparison of Pure-Shear versus Strip Tensile test"

Santus C. (2013) "Crack growth resistance of MAG butt-welded joints of S355JR construction steel"

Barone S., Paoli A., Razionale A. V. (2013) "Creation of 3D Multi-Body Orthodontic Models by Using Independent Imaging Sensors"

Riccardo Bacci di Capaci (2013) "DIAGNOSTICA DEI LOOP DI REGOLAZIONE"

Ambrosini W. (2013) "Developing a CFD methodology for the analysis of flow stability in heated channels with fluids at supercritical pressures "

Ambrosini W. (2013) "Discussion on the stability of natural circulation loops with supercritical pressure fluids"

Giusti V (2013) "Dosimetry for gadolinium neutron capture therapy (GdNCT)"

Michele Lanzetta (2013) "Dynamic set-up rules for hybrid flow shop scheduling with parallel batching machines"

Artoni A., Gabiccini M. (2013) "Ease-off based compensation of tooth surface deviations for spiral bevel and hypoid gears: only the pinion needs corrections"

Polacco G. (2013) "Effect of nanoclay and conventional flame retardants on asphalt mixtures fire reaction"

Giuseppe Gallone (2013) "Effects of plasticization of a soft silicone for dielectric elastomer actuation"

Quarta A, Mengali G. (2013) "Electric solar wind sail mass budget model"

Franco A (2013) "Energetic balance in the debonding of a reinforcing stringer: Effect of the substrate elasticity"

BENNATI S., VALVO P.S. (2013) "Erratum to: An enhanced beam-theory model of the mixed-mode bending (MMB) test - Part I: literature review and mechanical model"

BENNATI S, VALVO P.S. (2013) "Erratum to: An enhanced beam-theory model of the mixed-mode bending (MMB) test - Part II: applications and results"

Marradi A. (2013) "Evaluation of cement treated mixtures with high percentage of reclaimed asphalt pavement"

Aquaro D, Lo Frano R (2013) "Experimental Evaluation of thermal conductivity of ceramic pebble beds"

Rozzia D (2013) "Experimental Investigation on Powder Conductivity for the Application to Double Wall Heat Exchanger (NACIE-UP)"

Fabrizio Paganucci, Mariano Andrenucci (2013) "Experimental Study of a Hundred-Kilowatt-Class Applied-Field Magnetoplasmadynamic Thruster"

D. Fanteria, A. Lanciotti (2013) "Experimental and analytical assessment of fatigue and crack propagation in cold worked open hole specimens"

Ambrosini W., Forgione N. (2013) "Experimental and computational analysis of steam condensation in the presence of air and helium"

Francesca Argenti, Gabriele Landucci (2013) "Experimental and numerical methodology for the analysis of fireproofing materials"

Mariotti A., Buresti G. (2013) "Experimental investigation on the influence of boundary layer thickness on the base pressure and near-wake flow features of an axisymmetric blunt-based body"

G. Dini (2013) "Experimental optimization of micro-electrical discharge drilling process from the perspective of inner surface enhancement measured by shear-force microscopy"

BRAGLIA M (2013) "Extending value stream mapping: The synchro-MRP case"

Beghini M., Bertini L. (2013) "Fatigue behaviour of die-casting aluminum alloy suspension arms for scooters"

Lorenza Mattei (2013) "Finite element analysis of the meniscectomised tibio-femoral joint: implementation of advanced articular cartilage models"

Leonardo Tognotti (2013) "Flame characteristics of pulverized torrefied-biomass combusted with high-temperature air"

Armando Razionale (2013) "From 2D to 3D: Construction of a 3D Parametric Model for Detection of Dental Roots Shape and Position from a Panoramic Radiograph?A Preliminary Report"

R. Ciolini, F. D'Errico (2013) "Functional test of a Radon sensor based on a high-resistivity-silicon BJT detector"

Gallone G. (2013) "Functionalized carbon nanotubes as a filler for dielectric elastomer composites with improved actuation performance"

Gualtiero Fantoni (2013) "Functions and failures: how to manage technological promises for societal challenges"

Gabiccini M (2013) "Grasp Analysis Tools for Synergistic Underactuated Robotic Hands"

Michele Lanzetta (2013) "Gripping by controllable wet adhesion using a magnetorheological fluid"

Michele Lanzetta (2013) "Heuristics for scheduling a two-stage hybrid flow shop with parallel batching machines: application at a hospital sterilisation plant"

G. Fantoni (2013) "How microtool dimension influences electrochemical micromachining"

G. Pannocchia (2013) "Identification and experimental validation of an HIV model for HAART treated patients"

Maurizio Venutelli (2013) "Improvements of the Vasiliev's Box-Scheme for Transcritical Flows in Open Channel"

S. Caprili, W. Salvatore (2013) "Influence of steel mechanical properties on EBF seismic behaviour"

Polacco G (2013) "Internal Structure of Bitumen/Polymer/Wax Ternary Mixtures"

Salvetti M.V., Camarri S. (2013) "Investigation of the steady engulfment regime in a three-dimensional T-mixer"

Rusci S (2013) "La Riforma della Legge Toscana in materia di Governo del Territorio. Un passo oltre la contrapposizione"

Dini G. (2013) "Laser beam welding of dissimilar ferritic/martensitic stainless steels in a butt joint configuration"

Camarri S. (2013) "Linear stability analysis of wind turbine wakes performed on wind tunnel measurements"

Orsi G (2013) "Mapping the pharyngeal and intestinal pH of Caenorhabditis elegans and real-time luminal pH oscillations using extended dynamic range pH-sensitive nanosensors"

Fastelli L. (2013) "Metabolismo urbano ed ecosystem services nella pianificazione degli spazi aperti: un’ipotesi per la Piana di Lucca"

Beghini M., Bertini L., Monelli B. D. (2013) "Metals identification from instrumented spherical indentation testing"

A. Bertei, C. Nicolella (2013) "Microstructural Modeling and Effective Properties of Infiltrated SOFC Electrodes"

Bertei A., Nicolella C. (2013) "Microstructural modeling for prediction of transport properties and electrochemical performance in SOFC composite electrodes"

Losa M., Leandri P. (2013) "Mixture design optimization of low-noise pavements"

Barone S., Paoli A., RAZIONALE A (2013) "Multiple alignments of range maps by active stereo imaging and global marker framing"

CROCE P (2013) "Non-linear behavior of heavy stays"

Michele Lanzetta (2013) "Nonpermutation flow line scheduling by ant colony optimization"

Cristiano Nicolella, Leonardo Tognotti (2013) "Numerical and experimental investigation of downdraft gasification of woody residues"

W. Ambrosini, N. Forgione (2013) "Numerical estimation of wall friction ratio near the pseudo-critical point with CFD-models"

GALLETTI C, Tognotti L (2013) "Numerical investigation of oxy-natural-gas combustion in a semi-industrial furnace: Validation of CFD sub-models"

Gabiccini M (2013) "On Motion and Force Controllability of Precision Grasps with Hands Actuated by Soft Synergies"

Quarta A, Mengali G. (2013) "Optimal Control Laws for Heliocentric Transfers with a Magnetic Sail"

Quarta AA, Mengali G (2013) "Optimal Solar Sail Phasing Trajectories for Circular Orbit"

Quarta A, Mengali G (2013) "Optimal Solar Sail Transfer to Linear Trajectories"

Michele Lanzetta (2013) "Optimal blind sampling strategy for minimum zone roundness evaluation by metaheuristics"

Lanzetta M (2013) "Optimum Dataset Size and Search Space for Minimum Zone Roundness Evaluation by Genetic Algorithm"

Forgione N. (2013) "Pb-16Li/water interaction: Experimental results and preliminary modelling activities"

G Ancione (2013) "Potential loading damage to industrial storage tanks due to volcanic ash fallout"

Caroti G., Piemonte A. (2013) "Progettazione e primi test su prototipi di velivoli senza pilota per il rilievo metrico del territorio"

Nicolella C (2013) "Proof of concept for the Dual Membrane Cell. Part II: Mathematical modeling of charge transport and reaction in the dual membrane."

G. Landucci (2013) "Quantitative assessment of domino and NaTech scenarios in complex industrial areas"

d'Errico F. (2013) "Radiotherapy out-of-field dosimetry: Experimental and computational results for photons in a water tank"

Scali C. (2013) "Refinement of Cascade Tuning to Improve Control Performance without Requiring Any Additional Knowledge on the Process"

G Gallone (2013) "Reinforced poly(propylene oxide): a very soft and extensible dielectric electroactive polymer"

V. Tricoli (2013) "Response to Comment on "On the flow field about an electrophoretic particle""

G.Ancione (2013) "Risks associated with volcanic ash fallout from Mt.Etna with reference to industrial filtration systems"

Artoni A., Guiggiani M. (2013) "Robust optimization of cylindrical gear tooth surface modifications within ranges of torque and misalignments"

Michele Lanzetta (2013) "Roundness: A closed form upper bound for the centroid to minimum zone center distance by worst-case analysis"

Riccardo Cassettari (2013) "STAR: FPGA-based software defined satellite transponder"

Michele Lanzetta (2013) "Scheduling flow lines with buffers by ant colony digraph"

G.Ancione (2013) "Semi-automatic geo-processing procedure for the vulnerability mapping of industrial facilities in areas with the potential volcanic ash fallout"

A. Mariotti, G. Buresti, M.V. Salvetti (2013) "Separation control and efficiency improvement in a 2D diffuser by means of contoured cavities"

G. Fantoni (2013) "Situating needs and requirements in the FBS framework"

Giusti V. (2013) "Solution of 3D multigroup, linearly anisotropic scattering, criticality problems by the AN boundary-element response-matrix method"

Camarri S (2013) "Stability analysis of experimental flow fields behind a porous cylinder for the investigation of the large-scale wake vortices"

Elisabetta Rosellini (2013) "Sterilization effects on the physical properties and cytotoxicity of poly(glycerol sebacate)"

BRAGLIA M, GABBRIELLI R. (2013) "Stock diffusion theory: a dynamic model for inventory control"

G. Mattei (2013) "Strain rate viscoelastic analysis of soft and highly hydrated biomaterials"

Polacco G. (2013) "Structural transitions and physical networks in wax-modified bitumens"

G. Lombardi (2013) "Study of Rigid Sail Aerodynamics"

Caroti G., Piemonte A. (2013) "The accuracy analysis of lidar-derived elevation data for the geometric description of the cross-sections of a riverbed"

Caroti G., Piemonte A. (2013) "The elevation net for the saltwater intrusion phenomenon analysis in the coastal plain of Pisa"

Ciulli E (2013) "Thermal effects of different kind influencing lubricated non-conformal contacts"

Carloni D., Paci S. (2013) "Thermal hydraulic feasibility analysis of the IBED PHTS for ITER"

Donato Aquaro (2013) "Thermal transient and the temperature profile in a HELICA mock-up simulated by a new finite element homogenous model"

Gonfiotti B, Paci S (2013) "Thermal-hydraulic-iodine chemistry coupling: Insights gained from the SARNET benchmark on the THAI experiments Iod-11 and Iod-12"

Quarta A (2013) "Time-Optimal Trajectories to Circumsolar Space Using Solar Electric Propulsion"

Quarta A.A., Mengali G (2013) "Trajectory Approximation for Low-Performance Electric Sail with Constant Thrust Angle"

Hamal Marino (2013) "Transitions between discrete and rhythmic primitives in a unimanual task"

Puccini M., Seggiani M., Vitolo S. (2013) "Treated municipal wastewaters as a sustainable resource of water for the leather industry"

Fastelli L. (2013) "Una proposta per la pianificazione delle aree agricole periurbane: lo standard di ruralità"

Reggiannini M. (2013) "Underwater Scene Understanding by Optical and Acoustic Data Integration"

Braglia M, Frosolini M (2013) "Virtual Pooled Inventories for equipment-intensive industries. An implementation in the paper district"

ORSI G, MAURI R (2013) "Volume of Mixing Effect on Fluid Counter-Diffusion."

Rashed C.A.A., Dini G. (2013) "Water jet guided laser as an alternative to EDM for micro-drilling of fuel injector nozzles: A comparison of machined surfaces"

ORSI G, BRUNAZZI E, GALLETTI C, MAURI R (2013) "Water-Ethanol Mixing in T-Shaped Microdevices"

Mattei L, Di Puccio F (2013) "Wear simulation of metal-on-metal hip replacements with frictional contact"

Barsotti R (2013) "Wrinkling of orthotropic membranes: an analysis by the polar method"

M. Paci, Polacco G (2013) "XRD Study of Intercalation in Statically Annealed Composites of Ethylene Copolymers and Organically Modified Montmorillonites. 1. Two-tailed Organoclays"

d'Errico F. (2013) "Superheated emulsions and track etch detectors for photoneutron measurements"

Giusti V. (2013) "High Precision Cross Sections and Physics Models for Proton Interactions Below 20 MeV in Geant4 "