IL PORTALE per la RICERCA dei DIPARTIMENTI

C. Saggese, A. Frassoldati, A. Cuoci, T. Faravelli (2013) "A Comprehensive Modeling Study of Soot Formation from Different Fuels"

Davide Manca, Salman Nazir, Simone Colombo (2013) "A Plant Simulator to Enhance the Process Safety of Industrial Operators"

A. Brenna, L. Lazzari, M. Ormellese (2013) "A Proposal of AC Corrosion Mechanism of Carbon Steel in Cathodic Protection Condition"

M. Galimberti, V. Cipolletti (2013) "A Rubber Vision of High Aspect Ratio Nanofillers"

G. Dotelli (2013) "A TOOL FOR THE OPTIMIZATION OF BUILDING ENVELOPE TECHNOLOGIES – BASIC PERFORMANCES AGAINST CONSTRUCTION COSTS OF EXTERIOR WALLS"

E. Dordoni, A. Meoli, W. Wu, G. Dubini, F. Migliavacca, G. Pennati (2013) "A VALIDATED PERIPHERAL STENT MODELING TO INVESTIGATE THE RISK OF FATIGUE FRACTURE"

G. Nano, M. Derudi (2013) "A critical analysis of techniques for the reconstruction of workers accidents"

S. Bersini, G. Dubini (2013) "A microfluidic model for cancer metastases to bone"

A. Brenna, L. Lazzari, M. Ormellese (2013) "AC interference corrosion of carbon steel in cathodic protection condition: a two-steps mechanism"

L. Toniolo (2013) "Advanced imaging and spectroscopy for the conservation and monitoring of cultural heritage"

G. Nano (2013) "Ambienti confinati: rischi da atmosfere sotto ossigenate o tossiche"

F. Migliavacca, G. Pennati (2013) "An Automated Simulation Protocol for Exercise Physiology in Fontan Patients Using a Closed-Loop Lumped-Parameter Model"

A. Lucotti, M. Tommasini, C. Castiglioni (2013) "Anular reactor testing and Raman surface characterization in the CPO of CH4 and C3H6"

M. Galimberti, V. Cipolletti, S. Musto, G. Peli (2013) "Applicazione di CNT in matrici elastomeriche"

Flavio Manenti (2013) "Assessment of Direct Thermal Energy Storage Technologies for Concentrating Solar Power Plants"

C. Sala Cattaneo, G. Nano, R. Rota (2013) "Batchsize and Topological Criteria: a Combined Approach to Safely Optimize Hazardous Polymerization Processes"

S. Gamba, L. A. Pellegrini (2013) "Biogas Upgrading: Analysis and Comparison between Water and Chemical Scrubbings"

M.V. Diamanti, M. Pedeferri (2013) "C-AFM as a means to identify heterogeneities at the nanoscale in thin anodic TiO2 films"

D. Manca (2013) "CAN IMMERSIVE VIRTUAL ENVIRONMENTS MAKE THE DIFFERENCE IN TRAINING INDUSTRIAL OPERATORS?"

A. Frassoldati (2013) "CFD SIMULATION OF A MESO-COMBUSTOR WITH DETAILED KINETICS"

M. Derudi, G. Nano (2013) "CFD-assisted safety design in a flue gas treatment plant retrofit"

G. Dotelli, P. Gallo Stampino, S. Latorrata, M. Gola, M. Sansotera, W. Navarrini (2013) "CHARACTERIZATION OF GDL TREATED WITH PERFLUOROPOLYETHERS FOR PEMFC BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS)"

Giorgia De Guido, Laura A. Pellegrini (2013) "CO2-mixture properties for pipeline transportation in the CCS process"

E. DORDONI, A. MEOLI, W. WU, G. DUBINI, G. PENNATI, F. MIGLIAVACCA (2013) "COMPUTER MODELS OF STENTED FEMORO-POPLITEAL SEGMENT DURING KNEE-JOINT FLEXION"

C. Malloggi, B. Del Curto, A. Cigada, G. Candiani (2013) "Cardboard-based filters for the air treatment of indoor environment"

C. Malloggi, R. Chiesa, G. Candiani (2013) "Cationic Polymers for Gene Delivery: Influence of the Most Prominent Biochemical Parameters on Transfection Behavior"

M. Derudi, R. Rota, G. Nano (2013) "Characteristics of PAHs emitted from incense, candles and mosquito coils burning"

L. Andena, F. Briatico, M. Benanti (2013) "Characterization and Modelling of the Mechanical and Acoustical Properties of a Pvc Rigid Foam"

C. Marano, S.H. Mohammadpoor, M. Rink (2013) "Characterization of high cis-content polybutadiene compounds differing in cis-content and molecular weight distribution"

L. De Nardo (2013) "Chitosan scaffolds with hierarchical porosity"

G. Bozzano (2013) "Coalescence between adjacent drops lying on the interface of two liquids"

G. Bozzano (2013) "Coalescence between adjacent drops relying on the interface of two liquids"

M. Gastaldi, M. Carsana, F. Lollini, E. Redaelli, L. Bertolini (2013) "Comportamento a corrosione di armature in acciaio inossidabile nel calcestruzzo"

F. Migliavacca, G. Dubini (2013) "Computational fluid dynamics simulations including oxygen mass transport in stented coronaries"

A. Cuoci, A. Frassoldati, T. Faravelli (2013) "Cool flames in droplet combustion"

C. Chiastra, F. Migliavacca (2013) "Coronary stenting: from optical coherence tomography to fluid dynamic simulations"

L. Lazzari, M. Ormellese, A. Brenna (2013) "Criteri di protezione catodica in presenza di interferenza da corrente alternata"

L. Magagnin, L. Nobili (2013) "DLC coatings for light alloys"

M. Derudi, C. Sala Cattaneo, R. Rota (2013) "Detailed modelling of an industrial process: vinyl acetate emulsion homopolymerization"

F. Manenti, S. Pierucci (2013) "Development of a kinetic model of lean-nox-trap and validation through a reactive CFD approach"

P. Garbagnoli, B. Del Curto, L. De Nardo, A. Cigada (2013) "Development of innovative packaging characterized by active thermal insulation properties "

Flavio Manenti (2013) "Direct Solar-Powered Biomass Gasification Using Low-Temperature Steam"

R.Pelosato, G. Dotelli, C Cristiani (2013) "ELECTRICAL CHARACTERIZATION OF CO-PRECIPITATED YBaCo2O5+d IN YBC-LSGM-YBC SYMMETRIC CELL"

B. Del Curto (2013) "Education and Research: when design and engineering perform new links with the industrial world"

M. Tommasini (2013) "Effect of K on soot combustion by combined TPO and Raman spectroscopy"

C. Marano, M. Rink (2013) "Effect of Processing on Environmental Stress Cracking Behaviour of Hips"

P. Gallo Stampino, R. Balzarotti, C. Cristiani, G. Dotelli, S. Latorrata (2013) "Effect of different hydrophobic agents onto the surface of gas diffusion layers for PEM-FC"

F. Caimmi, R. Frassine (2013) "Effetto della temperatura sulla tenacità interlaminare di compositi carbonio/epossidica rinforzati con tessuti"

F. Bolzoni, G. Fumagalli, L. Lazzari, E. Fallahmohammadi (2013) "Effetto dell’infragilimento da idrogeno sulle caratteristiche meccaniche di acciai per tubazioni"

F. Bolzoni, M. Ormellese, E. Fallahmohammadi, G. Fumagalli, L. Lazzari (2013) "Electrochemical investigation of hydrogen diffusion in pipeline steels"

Flavio Manenti, Giulia Bozzano (2013) "Energy-Process Integration of the Gas-Cooled/Water-Cooled Fixed-Bed Reactor Network for Methanol Synthesis"

S. Marzorati, M.C. Tanzi, S. Farè (2013) "Enhancing pancreatic islet functionality by the use of gelatin-based hydrogels"

P. Garbagnoli, M. Diamanti, B. Del Curto, M. Pedeferri (2013) "Environmental improvement of building insulating cladding system"

P. Garbagnoli, M.V. Diamanti, B. Del Curto, M. Pedeferri (2013) "Evaluation of PCM-cardboard composite materials in dynamic thermal conditions"

Alberto Cuoci, Alessio Frassoldati, Tiziano Faravelli (2013) "Experimental and kinetic modeling study of PAH formation in coflow diffusion n-butanol doped methane flames"

Matteo Pelucchi, Chiara Saggese, Alessio Frassoldati (2013) "Experimental and kinetic modelling study of n-butanal auto-ignition in a shock tube"

P. Gallo Stampino, C. Cristiani, G. Dotelli, S. Latorrata (2013) "Formulation and properties of different microporous layers with carboxymethylcellulose (CMC) composition for PEM-FC"

A. Frassoldati, S. Tavelli, M. Derudi, A. Cuoci (2013) "Full-scale fire tests in the Morgex north tunnel"

M. TUNESI, C. GIORDANO, A. CIGADA (2013) "Functional injectability and rheological behavior of natural, synthetic and semi-synthetic gels and semi-IPNs for central nervous system application"

F. Manenti, S. Pierucci (2013) "Fundamental understanding of the NOx storage through a novel spectrokinetic approach"

E. Brenna (2013) "Fungal laccases and enoate reductases as biocatalysts of fine chemical transformations"

C. Saggese, A. Cuoci, A. Frassoldati, T. Faravelli (2013) "Gas Phase Kinetics of Volatiles from Biomass Pyrolysis. Note II: Furan, 2-methyl-furan, and 2,5-dimethylfuran"

V. Cipolletti, M. Galimberti (2013) "Graphite Intercalate Compounds as Possible Nanoscale Modifiers"

Flavio Manenti (2013) "High Fe loaded supported catalysts for biosyngas Fischer-Tropsch conversion: experimental results and detailed simulation"

D. Perego, S. Franz, M. Bestetti (2013) "High performance supercapacitors based on thermally reduced graphene oxide"

M. TUNESI, A. CIGADA, C. GIORDANO (2013) "Hsp70 and hydrogels: protein delivery strategies in neurodegeneration"

S. Farè, M.C. Tanzi (2013) "Hybrid 'Polyurethane-Gelatin' Scaffolds for Meniscal Tissue"

M. TUNESI, A. CIGADA, C. GIORDANO (2013) "Hydrogels for TAT-Hsp70 delivery: a challenge in neurodegeneration"

F. Briatico-Vangosa, L. Andena, E. Cazzoni, M. Benanti (2013) "Hyperelastic modeling of shock absorption in track surfaces"

G. Nano, R. Rota (2013) "Iec 61508: effect of test policy on the probability of failure on demand of safety instrumented systems"

S. Bersini (2013) "In vitro model for tumor cell extravasation to bone"

C. Malloggi, R. Chiesa, G. Candiani (2013) "Influence of Exofacial Protein Sulfhydryls and Intracellular Glutathione on Transfection Process of SS14 Bioreducible Lipoplexes"

S. Farè, M.C. Tanzi (2013) "Influence of polyol composition on morphological and mechanical properties of polyurethane foams"

Fabiola Munarin, Roberta Gentilini, Maria Cristina Tanzi, Paola Petrini (2013) "Injectable Pectin Hydrogels as Cell Carriers for Soft Tissue Regeneration"

Fabiola Munarin, Paola Petrini, Maria Cristina Tanzi (2013) "Injectable pectin- hydroxyapatite biocomposites for minimal-invasive bone surgery"

M.C. Tanzi, S. Farè (2013) "Innovative Silk Fibroin-Based Tubular Scaffolds for Vascular Applications"

M. Galimberti, V. Cipolletti (2013) "Innovative polymer nanocomposites with clay and graphite intercalate compounds"

Flavio Manenti (2013) "Intensifying Air Separation Units"

E.Fallahmohammadi, F.Bolzoni, G. Fumagalli, A. Brenna, L. Lazzari (2013) "Interaction of Hydrogen with Different Microstructure of pipeline Steels"

S. Farè, M.C. Tanzi (2013) "Interaction of MSCs with biomimetically-functionalized PU substrates for meniscal tissue engineering"

A. Brenna, M. Ormellese, L. Lazzari (2013) "Interferenza da corrente alternata sull???acciaio in protezione catodica: criteri di protezione e meccanismo di corrosione"

G. Dotelli, P. Gallo Stampino, S. Latorrata (2013) "Inverter ripple as a diagnostic tool for ohmic resistance measurements on PEM fuel cells"

G. Dotelli, P. Gallo Stampino, S. Latorrata (2013) "Inverter ripple as a diagnostic tool for ohmic resistance measurements on PEM fuel cells"

A. Lucotti, M. Tommasini, C. Castiglioni (2013) "Kinetic analysis and Raman surface characterization in the CPO of hydrocarbon fuels"

M. Bissoli, A. Frassoldati, A. Cuoci, T. Faravelli (2013) "Kinetic modeling of the low temperature reactivity of n-butanol"

G. Dotelli (2013) "LCA and LCC based Energy Optimization of Building Renovation Strategies"

G. Dotelli (2013) "LCA ed LCC di un intervento di demolizione totale"

D. Gulotta, S. Goidanich (2013) "Long-term evaluation of the salt decay susceptibility of NHL repair mortars"

G. Raffaini (2013) "MODELLAZIONE MOLECOLARE DELL’ADSORBIMENTO DI PROTEINE SU POLIMORFI DI TiO2"

Lucio Melone (2013) "Magnetic behavior of cyclodextrin-based nanosponges bearing nitroxyl persistent radicals"

E. Cazzoni, C. Marano, M. Rink (2013) "Mechanical characterization of carbon black filled NR/BR compounds from small strains up to fracture"

E. Redaelli, M. Carsana, M. Gastaldi, F. Lollini, L. Bertolini (2013) "Metodi elettrochimici temporanei"

Flavio Manenti (2013) "Modeling Maillard reaction and thermal transformation during bread baking"

L. Lazzari, M. Ormellese (2013) "Modeling of Potential Distribution of Subsea Pipeline under Cathodic Protection by Finite Element Method"

F. Migliavacca, G. Dubini, E. Dordoni (2013) "Modeling of Stent Implantation in a Human Stenotic Artery."

F. Migliavacca, G. Dubini, E. Dordoni (2013) "Modeling stent deployment in realistic arterial segment geometries: the effect of the plaque composition"

M. Derudi, G. Bozzano (2013) "Modelling and Simulation of an emulsion copolymerisation process"

L. Lazzari, M. Ormellese, A. Brenna (2013) "Modello probabilistico a matrici di Markov per la previsione della corrosione per pitting degli acciai inossidabili"

Antonino Famulari, Alberto Baggioli, Guido Raos, Stefano V. Meille (2013) "Monomer conformations for poly(3-alkylthiophene) atomistic models"

M. Corbetta, S. Pierucci (2013) "Multistep Kinetic Model of Biomass Pyrolysis"

Walter Navarrini, Maurizio Sansotera, Massimo Gola, Giovanni Dotelli (2013) "NEW OPPORTUNITY FOR A PTFE-FREE FUEL CELL ASSEMBLY BY MEANS OF SPECIFIC PERFLUORINATED REACTIVE POLYMERIC MATHERIAL"

F. NASON, G. DUBINI (2013) "NUMERICAL SIMULATION OF A DEFORMABLE CELL IN MICROCHANNELS"

S. Musto, M. Galimberti (2013) "Natural rubber from hevea brasiliensis, partenium argentatum, taraxacum kok-saghyz: from chemical composition to material properties"

M. TUNESI, C. GIORDANO, A. CIGADA (2013) "Natural, synthetic and semi-synthetic gels as innovative strategies for central nervous system application: flow behaviour and viscoelastic properties"

M. TUNESI, C. GIORDANO, A. CIGADA (2013) "Natural, synthetic, semi-synthetic gels and semi-IPNs for central nervous system applications: functional injectability and rheological behavior "

F. MUNARIN, M. TUNESI, A. CIGADA, C. GIORDANO, P. PETRINI (2013) "Neurodegenerative disorders: novel hydrogels for drug delivery strategies"

C. Malloggi, B. Del Curto, A. Cigada, G. Candiani (2013) "New generation of corrugated cardboard-based filters for improved indoor air quality"

S. Farè, M.C. Tanzi (2013) "Novel PU-based Composite Scaffolds for Bone Tissue Engineering"

F. Manenti (2013) "Novel two-steps optimal control of batch polymerization reactors and application to PMMA production for the fabrication of artificial bone tissue"

S. Tavelli, M. Derudi, A. Cuoci, A. Frassoldati (2013) "Numerical analysis of pool fire consequences in confined environments"

A. Cuoci, A. Frassoldati, T. Faravelli (2013) "Numerical simulation of laminar coflow flames with detailed kinetic mechanisms"

F. Manenti (2013) "Optimization of batch and semi-batch reactors"

F. MUNARIN, M. TUNESI, A. CIGADA, P. PETRINI, C. GIORDANO (2013) "Optimization of the formulation of agar/carbomer gels: effects of the neutralizing agent and hydroxyl donors"

P. Garbagnoli, B. Del Curto, M. Pedeferri (2013) "Optimization of thermal insulating cellulose panels for sustainable building envelope"

F. Migliavacca, S. Fare' (2013) "PCL coatings on magnesium alloy"

Matteo Gastaldi, Federica Lollini, Luca Bertolini (2013) "PROGETTAZIONE PRESTAZIONALE DI STRUTTURE IN C.A. CON ARMATURE IN ACCIAIO INOSSIDABILE"

C. Malloggi, E. Tallarita, R. Chiesa, G. Candiani (2013) "Parameters influencing the transfection behavior of commercially sourced cationic polymers"

C. Chiastra, G. Dubini, F. Migliavacca (2013) "Patient-specific stented coronary bifurcations: numerical analysis of near-wall quantities and bulk flow"

R. Gentilini, F. Munarin, P.Petrini, M.C. Tanzi (2013) "Pectin gels for tissue engineering"

Matteo Gastaldi, Federica Lollini, Luca Bertolini (2013) "Performance-based durability design of concrete structures reinforced with stainless steel bars"

Guido Raos, Antonino Famulari, Stefano V. Meille (2013) "Polymorphism in organic electronic materials: PCBM as a case study"

G. Dubini (2013) "Pre-surgery planning in vascular procedures: an introduction to the RT3S Project"

M.V. Diamanti, M. Pedeferri (2013) "Production of anodic TiO2 nanofilms and their characterization"

L. Lazzari, M. Ormellese, A. Brenna (2013) "Proposta di meccanismo di corrosione dell’acciaio in protezione catodica in presenza di interferenza da corrente alternata"

M. Corbetta, A. Frassoldati, S. Pierucci (2013) "Pyrolysis of thick biomass particles: experimental and kinetic modeling"

F. Manenti (2013) "Quality control of poly(methyl methacrylate) to medical purpose by multiple headspace extraction"

E.M. Iannicelli Zubiani, C. Cristiani, G. Dotelli, P. Gallo Stampino, M. Masi, R. Pelosato (2013) "RARE EARTHS SEPARATION FROM WEEE BY SYNTHETIC POLYMERS MODIFIED CLAYS"

F. Migliavacca, E. Dordoni, G. Dubini, G. Pennati (2013) "Real Time Prediction of the Fatigue Behavior of Peripheral Stents"

F. Migliavacca, E. Dordoni, G. Dubini, G. Pennati (2013) "Real time prediction of the fatigue behavior of peripheral stents13th IEEE International Conference on BioInformatics and BioEngineering"

M. Galimberti, V. Cipolletti, S. Musto, G. Peli, V. Kumar (2013) "Recent advancements in rubber nanocomposites"

A. Stagni, A. Frassoldati, T. Faravelli (2013) "Reduced Kinetic Mechanisms for Diesel Spray Combustion Simulations"

Stefania Moioli, Laura A. Pellegrini (2013) "Regeneration Section of CO2 Capture Plant by MEA Scrubbing with a Rate-Based Model"

Stefania Moioli, Laura A. Pellegrini (2013) "Regeneration section of CO2 capture plant by MEA scrubbing with a rate-based model"

Tommaso Nicolini, Guido Raos, Alberto Baggioli, Antonino Famulari, Stefano V. Meille (2013) "Regioregular Poly(3-octylthiophene): Diffraction studies and computational modeling"

D. Gastaldi, R. Lucchini, P. Vena (2013) "Reliability characterization and FEM modeling of power devices under repetitive power pulsing"

Flavio Manenti (2013) "Revised kinetic scheme for thermal furnace of sulfur recovery units"

E. Redaelli, L. Bertolini (2013) "Rialcalinizzazione elettrochimica del calcestruzzo carbonatato: studio del comportamento anodico in soluzione di armature in acciaio al carbonio"

L. Andena, N. Castro Fajardo (2013) "Scratch and wear characteristics of polyamide nanocomposites"

F. Manenti (2013) "Selecting the best control methodology to improve the efficiency of discontinuous reactors"

M.V. DIAMANTI, M. ORMELLESE, M. PEDEFERRI (2013) "Self-cleaning ability and cooling effect of TiO2-containing mortars"

B. Del Curto (2013) "Sensory Metrology: when emotions and experiences contribute to Design"

G. Dotelli (2013) "Sostenibilità ambientale di intonaci in terra cruda: analisi LCA "dalla culla al cancello""

M. Ormellese (2013) "Structural concrete solutions for Al-Faw grand port design specifications"

G. Fumagalli, L. Lazzari, F.Bolzoni, E.Fallahmohammadi (2013) "Studio del processo di diffusione di idrogeno in acciai per tubazioni"

P. Garbagnoli, B. Del Curto, M.P. Pedeferri (2013) "Study and Characterization of Insulating Panels for Sustainable Buildings Made by Waste Cardboard and PCMs"

F. Manenti (2013) "Study of direct thermal energy storage technologies for effectiveness of concentrating solar power plants"

Tommaso Nicolini, Guido Raos, Antonino Famulari, Stefano Vadlo Meille (2013) "Substituted fullerenes in the solid state: phenyl-C61- butyric acid methyl ester and its cocrystals "

Stefano Langé, Laura A. Pellegrini (2013) "Sustainable combined production of hydrogen and energy from biomass in malaysia"

Faggiano E (2013) "TV-H1 variational inpainting applied to metal artifact reduction in CT images"

E. Fasoli, A. D'Amato, A. Citterio (2013) "The 'hidden' proteome of cow's and Jennys' milk as revealed by combinatorial peptide ligand librariesFarm animal proteomics 2013"

Roberto Chiesa (2013) "The Biofilm Formation onto Implants and Prosthetic Materials May Be Contrasted Using Gallium (3+)"

Barbara Del Curto (2013) "The Heritage of Time: an Experimental Project on Aging Poetry and the Possibilities of Plastics"

M. Pedeferri, M.V. Diamanti (2013) "The effect of soiling and oxidation on titanium exposed to outdoor environments"

S. Tavelli, R. Rota, M. Derudi (2013) "The role of ventilation on the dispersion of fire gases inside a tunnel"

Antonino Famulari, Alberto Baggioli, Stefano Valdo Meille (2013) "The structure of 2,3-exo-disyndiotactic polynorbornene: a combined X-ray diffraction / molecular modelling study"

M.V. Diamanti, M. Pedeferri (2013) "Thickness and structure of thin anodic TiO2 films"

G. Griffini, M. Levi, S. Turri (2013) "Thin-film Luminescent Solar Concentrators: Optimization and Photo-Stability Study of a Model Device based on a Perylene Fluorescent Dye"

M.C. Tanzi, S. Farè (2013) "Two-layer silk tubular scaffolds for small diameter blood vessel regeneration"

M.V. Diamanti, M. Ormellese, M. Pedeferri (2013) "UV- and visible light-activated water purification on anodic titanium dioxide films"

A. Milani (2013) "Ultrafast spectroscopy of linear carbon chains: the case of dinaphthylpolyynes "

S. Colombo, S. Nazir, D. Manca (2013) "Virtual Reality As Effective Tool For Training And Decision-Making: Preliminary Results Of Experiments Performed With A Plant Simulator"

P. Garbagnoli, B. Del Curto, L. De Nardo (2013) "Advanced applications for recycled waste paper"

G. Dotelli (2013) "Assessing food security in water scarce regions by Life Cycle Analysis: a case study in the Gaza strip"

G. Griffini, R.Suriano, M. Levi, S. Turri (2013) "Characterization of mechanically reclycled, non sorted plastic waste"

B. Del Curto, P. Garbagnoli, V. Masconale, M. Diamanti, M. Pedeferri (2013) "Engineering processes for jewelry design"

G. Griffini, M. Levi, S. Turri (2013) "Photo-degradation of an optimized perylene-based luminescent solar concentrator"

M. Ormellese, P. Garbagnoli, B. Del Curto (2013) "SMART DESIGN: WHEN THE APPLICATION OF INTELLIGENT MATERIALS GIVE ITS CONTRIBUTION TO THE INDUSTRIAL DESIGN DEVELOPMENT"

G. Griffini, M. Levi, S. Turri (2013) "Thin-film Luminescent Solar Concentrators: Optimization and Photo-Stability Study of a Model Device based on a Perylene Fluorescent Dye"

A.Cuoci (2013) "Towards a first-principles approach to chemical reaction engineering”"

L. Cerioli (2013) "A new transaminase from the halophilic bacterium Halomona elongata: Expression, purification and characterization."

M. Galimberti, S. Musto, L. Tinè, A. Citterio (2013) "Alternative sources for natural rubber: hevea brasiliensis, partenium argentatum, taraxacum kok-saghyz. From chemical composition to material properties"

S. U. Shisodia, R. Sebastiano, A. Valerio, A. Truscello, A. Citterio (2013) "Cascade one-pot three component, solvent free, green reactions of polyols & alkyl carbonates with phenols or amines"

B. Del Curto (2013) "Design texture and design finish surface treatment to achieve the user's preferences"

V. Kumar, V. Cipolletti, M. Galimberti (2013) "Exfoliation of Graphite with High Shape Anisotropy in Poly(1,4-cis-isoprene)"

V. Kumar, M. Galimberti (2013) "Filler networking of graphite with high shape anisotropy in poly(1,4-cis-isoprene)"

M. Galimberti, V. Cipolletti, C. Gambarotti, M. Guenzi (2013) "Functionalized carbon nanofillers for hydrocarbon polymers"

V. Cipolletti, M. Galimberti (2013) "Graphite Intercalation Compounds with Rotator Hexagonal Order in the Intercalated Layers"

M. Galimberti, V. Cipolletti, V. Kumar (2013) "Graphite Oxide Intercalation Compounds in Hydrocarbon Polymer"

V. Kumar, V. Cipolletti, M. Galimberti (2013) "Graphite and Graphite Derivatives with High Shape Anisotropy for Polymer Nanocomposites"

A. Citterio, M. Galimberti, G. Leonardi, R. Sebastiano, S.U. Shisodia, L. Tinè, A. Truscello (2013) "Innovative polymers from C-3 natural precursors"

V. Cipolletti, M. Galimberti (2013) "Organoclays with hexagonal rotator order for the paraffinic chains of the compensating cation. Implications on the structure of clay polymer nanocomposites"

L. De Nardo (2013) "Porous chitosan scaffold with highly oriented porosity"

S. Musto, M. Galimberti (2013) "Strain induced crystallization and orientation of poly(1,4-cis)isoprene from Hevea brasiliensis and Taraxacum"

P. D’Arrigo, D. Tessaro, L. Cerioli, A. Fiorati (2013) "Studies on Racemic Resolution of D,L-aspartate by StLASPO"

V. Cipolletti, M. Galimberti (2013) "Syndiotactic Polystyrene Aerogels Containing Reduced Graphite Oxide and Graphite Oxide intercalation Compounds"