IL PORTALE per la RICERCA dei DIPARTIMENTI

Frascella F., Ricciardi S., Rivolo P., Moi V., Giorgis F., Descrovi E. (2013) "A Fluorescent One-Dimensional Photonic Crystal for Label-Free Biosensing Based on Bloch Surface Waves"

Demichela M. (2013) "A compound methodology to assess the impact of human and organizational factors impact on the risk level of hazardous industrial plants"

F. Carosio, G. Malucelli (2013) "A dielectric study on colloidal silica nanoparticle Layer-by-Layer assemblies on polycarbonate"

Descrovi E. (2013) "A full ellipsometric approach to optical sensing with Bloch surface waves on photonic crystals"

M. Sangermano (2013) "A new two-stage curing system: thiol-ene/epoxy homopolymerization using an allyl terminated hyperbranched polyester as reactive modifier"

G A Ummarino, Sara Galasso (2013) "A phenomenological multiband Eliashberg model for LiFeAs"

Demichela M. (2013) "AN IMPLEMENTATION OF INFRARED THERMOGRAPHY IN MAINTENANCE PLANS WITHIN A WORLD CLASS MANUFACTURING STRATEGY"

Malucelli G. (2013) "Acrylic microspheres as drug-delivery systems: synthesis through in situ microemulsion photoinduced polymerization and characterization"

M. Piumetti (2013) "Active sites, complexity structures and hypestructures in catalysts"

Irene Cannavaro (2013) "Adhesivejoiningtechnologiesactivatedbyelectro-magnetic external trims"

Francesco Baino, Sonia Fiorilli, Chiara Vitale Brovarone, Barbara Onida (2013) "Al-MCM-41 inside a glass-ceramic scaffold: a meso-macroporous system for acid catalysis"

Grassini S, Angelini E (2013) "An in situ corrosion study of Middle Ages wrought iron bar chains in the Amiens Cathedral"

G.Saracco (2013) "Artificial Photosynthesis for Solar Fuels – an Evolving Research Field within AMPEA, a Joint Programme of the European Energy Research Alliance"

Daniele L. Marchisio (2013) "Assessment of Gel Formation in Colloidal Dispersions during Mixing in Turbulent Jets"

Tulliani J.M. (2013) "Ba-Doped Iron Oxide as a New Material for NO2 Detection"

Mandracci P. (2013) "Band structure, density of states, and crystal chemistry of ZrGa2 and ZrGa3 single crystals"

Emiliano Descrovi, Pietro Mandracci, Fabrizio Giorgis (2013) "Bloch surface wave-enhanced fluorescence biosensor"

Baino F., Vitale-Brovarone C. (2013) "Bonding strength of glass-ceramic trabecular-like coatings to ceramic substrates for prosthetic applications"

Mandracci, Descrovi (2013) "Broadband wide-angle dispersion measurements: Instrumental setup, alignment, and pitfalls"

Bongiovanni R., Gerbaldi C. (2013) "Cellulose-based Li-ion batteries: a review"

Destro M., Gerbaldi C., Bodoardo S., Penazzi N. (2013) "Cellulose/graphite/carbon fibres composite electrodes for Li-ion batteries"

Agnello M., Aimo I. (2013) "Centrality dependence of pi, K, and p production in Pb-Pb collisions at root s(NN)=2.76 TeV"

Agnello M., Aimo I. (2013) "Centrality dependence of the pseudorapidity density distribution for charged particles in Pb-Pb collisions at root s(NN)=2.76 TeV"

Agnello M. (2013) "Centrality determination of Pb-Pb collisions at root s(NN)=2.76 TeV with ALICE"

Agnello M. (2013) "Charge correlations using the balance function in Pb-Pb collisions at root s(NN)=2.76 TeV"

Agnello M. (2013) "Charged kaon femtoscopic correlations in pp collisions at sqrt[s]=7¿¿TeV"

Agnello M., Aimo I. (2013) "Charmonium and e(+)e(-) pair photoproduction at mid-rapidity in ultra-peripheral Pb-Pb collisions at root s(NN)=2.76 TeV"

G. Barbero (2013) "Cholesteric pitch transitions induced by mechanical strain"

Agnello M. (2013) "Coherent J/psi photoproduction in ultra-peripheral Pb-Pb collisions at root s(NN)=2.76 TeV"

Alongi J., Frache A. (2013) "Combustion characteristics of cellulosic loose fibres"

Cicero G. (2013) "Comparison between ZnO nanowires grown by chemical vapor deposition and hydrothermal synthesis"

M. Piumetti (2013) "Complexity structures of active sites in catalysis"

M. Naguib, S. Grassini, M. Sangermano (2013) "Core/shell PBA/PMMA-PGMA nanoparticles to enhance the impact resistance of UV-cured epoxy systems"

Ferri A. (2013) "Cotton-Made Cellulose Support for Anti-Allergic Pajamas"

Nair J.R., Gerbaldi C., Bongiovanni R., Penazzi N. (2013) "Cycling profile of MgAl2O4-incorporated composite electrolytes composed of PEO and LiPF6 for lithium polymer batteries"

Nair J.R., Bongiovanni R., Gerbaldi C. (2013) "Cycling profile of innovative nanochitin-incorporated poly (ethylene oxide) based electrolytes for lithium batteries"

Agnello M., Aimo I. (2013) "D Meson Elliptic Flow in Noncentral Pb-Pb Collisions at root(S)(NN)=2.76 TeV"

Tulliani J.-M., Lombardi M., Palmero P., Fornabaio M. (2013) "Development and mechanical characterization of novel ceramic foams fabricated by gel-casting"

A. Ferri (2013) "Different methods for ß-cyclodextrin/triclosan complexation as antibacterial treatment of cellulose substrates"

Caldarola D., Onida B. (2013) "Direct determination of transition metals in mussel tissue digests using high-performance chelation ion chromatography with monolithic silica based chelating ion exchangers"

Agnello M., Aimo I. (2013) "Directed Flow of Charged Particles at Midrapidity Relative to the Spectator Plane in Pb-Pb Collisions at root s(NN)=2.76TeV"

P. Pecchio, D. Daghero, G. A. Ummarino, R. S. Gonnelli (2013) "Doping and critical-temperature dependence of the energy gaps in Ba(Fe_{1-x}Co_{x})_{2}As_{2} thin films"

Trigiante M. (2013) "Dualities Near the Horizon"

Smeacetto F. (2013) "Durability of anode supported Solid Oxides Fuel Cells (SOFC) under direct dry-reforming of methane"

Pravin Jagdale, Alberto Tagliaferro (2013) "Effects of Functionalization on Thermal Properties of Single-Wall and Multi-Wall Carbon Nanotube–Polymer Nanocomposites"

Alberto Fina, Alberto Venturello, Francesco Geobaldo (2013) "Effects of gas atmospheres on poly(lactic acid) film in acrylic acid plasma treatment"

Ghigo G. (2013) "Effects of irradiation-particle energy on critical current density in Co-doped BaFe2As2"

Palmero P., Montanaro L. (2013) "Elaboration of alumina-zirconia composites: Role of the zirconia content on the microstructure and mechanical properties"

Giovanni Barbero (2013) "Electric Impedance of a Sample of Dielectric Liquid Containing Two Groups of Ions Limited by Ohmic Electrodes: A Study with Pure Water"

B.Ruggeri, M.Bernardi, D.Fino (2013) "Energy efficacy used to score organic refuse pretreatment process for hydrogen anaerobic production"

M. SANGERMANO, M. LOMBARDI, A. GUERRIERO, F. PIRRI, L. MONTANARO. (2013) "Epoxy – BaTiO3 light-cured composites as organic capacitor."

Daniele L. Marchisio (2013) "Equilibrium-Eulerian LES Model for Poly-disperse Particle-laden Channel Flow "

Sitaramanjaneya Mouli Thalluri, Murid Hussain, Alessandro Virga, Guido Saracco, Nunzio Russo (2013) "Evaluation of the Parameters Affecting the Visible-Light-Induced Photocatalytic Activity of Monoclinic BiVO4 for Water Oxidation"

Luca Marmo (2013) "Explosibility of Polyamide and Polyester Fibers"

Marchisio D. L. (2013) "Extension of the Darcy–Forchheimer Law for Shear-Thinning Fluids and Validation via Pore-Scale Flow Simulations"

Massimo Lorusso, Daniele Ugues (2013) "FAILURE MODES OF PVD COATINGS IN MOLTEN Al-ALLOY CONTACT"

F. Balestra, F. Iazzi, A. Lavagno (2013) "FIRST experiment: Fragmentation of Ions Relevant for Space and Therapy"

S. Zanarini, S. Bodoardo, J. R. Nair, N. Penazzi (2013) "Fast Switching Electrochromic Devices Containing Optimized BEMA/PEGMA Gel Polymer Electrolytes"

Luca Dall'Asta (2013) "Fixation-coexistence transition in spatial populations"

Destro M., Gerbaldi C., Penazzi N., Bodoardo S. (2013) "Flexible cellulose/LiFePO4 paper-cathodes: toward eco-friendly all-paper Li-ion batteries"

A Angelini, F Giorgis, E Descrovi (2013) "Fluorescence diffraction assisted by Bloch surface waves on a one-dimensional photonic crystal"

Pisano R., Barresi A.A. (2013) "Freeze-drying of enzymes in case of water-binding and non-water-binding substrates"

Dario Caldarola, Barbara Onida (2013) "Functionalisation of mesoporous silica gel with 2-[(phosphonomethyl)-amino]acetic acid functional groups. Characterisation and application"

L Andrianopoli, M Trigiante (2013) "General properties of the expansion methods of Lie algebras"

M. Sangermano (2013) "Graphene oxide–epoxy hybrid material as innovative photocatalyst"

Montorsi A. (2013) "How hidden orders generate gaps in one-dimensional fermionic systems"

G. Malucelli (2013) "Hybrid organic-inorganic UV-cured films containing liquid-crystalline units"

Di Pasquale N., Marchisio D., Barresi A.A. (2013) "Identification of nucleation rate parameters with MD and validation of the CFD model for polymer particle precipitation"

M. Actis Grande (2013) "Identification of the critical pore sizes in sintered and ECAPed aluminium 6xxx alloy"

Fina A., Feng J. (2013) "In-depth radiative heat transmittance through polypropylene/nanoclay composites"

F.A. Deorsola (2013) "Influence of SPS parameters on the density and mechanical properties of sintered Ti3SiC2 powders"

M. Scalerandi (2013) "Influence of noise on the threshold for detection of elastic nonlinearity"

Thalluri S.R.M., Virga A., Russo N., Saracco G. (2013) "Insights from crystal size and band gap on the catalytic activity of monoclinic BiVO4"

Pagnani A., Zecchina R. (2013) "Integrated transcriptional and competitive endogenous RNA networks are cross-regulated in permissive molecular environments"

Rosso M. (2013) "Investigation on cobalt based alloy modified by titanium for dental applications"

Agnello M., Aimo I. (2013) "J/psi Elliptic Flow in Pb-Pb Collisions at root s(NN)=2.76 TeV"

Agnello M., Aimo I. (2013) "K-S(0) and Lambda Production in Pb-Pb Collisions at root s(NN)=2: 76 TeV"

Descrovi E., Angelini A., Giorgis F. (2013) "Leakage radiation interference microscopy"

S. Stassi, B. Onida (2013) "Length-Dependent Charge Generation from Vertical Arrays of High-Aspect-Ratio ZnO Nanowires"

Zeng J (2013) "Li-O2 Cells Based on Hierarchically Structured Porous a-MnO2 Catalyst and an Imidazolium Based Ionic Liquid Electrolyte"

Bella F., Bongiovanni R. (2013) "Light cured networks containing metal organic frameworks as efficient and durable polymer electrolytes for dye-sensitized solar cells"

Agnello M., Aimo I. (2013) "Long-range angular correlations of pi, K and p in p-Pb collisions at root s(NN)=5.02 TeV"

Agnello M. (2013) "Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV"

Biazzo I (2013) "Low-temperature excitations within the Bethe approximation."

Maizza (2013) "Low-temperature spark plasma sintering of pure nano WC powder"

Marco Sangermano (2013) "Luminescence variation by rigidity control of acrylic composite materials"

Marino F. (2013) "Materials and technological aspects of gilded buckles from a North Eastern Medieval Italian context"

Agnello M. (2013) "Measurement of the inclusive differential jet cross section in pp collisions at root s=2.76 TeV"

Monteverde Videla A.H.A., Zeng J., Francia C., Specchia S. (2013) "Mesoporous carbons supported non-noble metal Fe-NX electrocatalysts for PEM Fuel Cell oxygen reduction reaction"

Baino F., Vitale-Brovarone C. (2013) "Microstructural characterization and in vitro bioactivity of porous glass-ceramic scaffolds for bone regeneration by synchrotron radiation X-ray microtomography"

Rosso M. (2013) "Microstructural evolution and mechanical properties of AlMg/AlN composite materials obtained "in-situ""

Palmero P (2013) "Microstructure and mechanical properties of alumina-5vol.%zirconia nanocomposites prepared by powder coating and powder mixing routes"

S. Biamino, E. Padovano, M. Pavese, X. Chen, P. Fino, C. Badini (2013) "Microstructure and mechanical properties of milled ¿bre/SiC multilayer composites prepared by tape casting and pressureless sintering"

Agnello M., Aimo I. (2013) "Mid-rapidity anti-baryon to baryon ratios in pp collisions at root s=0.9, 2.76 and 7 TeV measured by ALICE"

Diego Pugliese, Elena Tresso (2013) "Modeling of the dye loading time influence on the electrical impedance of a dye-sensitized solar cell"

Hussain M., Akhter P., Fino D., Russo N. (2013) "Modified KIT-6 and SBA-15-spherical supported metal catalysts for N2O decomposition"

Sanchez Fellay L., Vanni M. (2013) "Motion of rigid aggregates under different flow conditions"

Marco Sangermano (2013) "Multifunctional antistatic and scratch resistant UV-cured acrylic coatings"

Agnello M., Aimo I. (2013) "Multiplicity dependence of the average transverse momentum in pp, p-Pb, and Pb-Pb collisions at the LHC"

Agnello M., Aimo I. (2013) "Multiplicity dependence of two-particle azimuthal correlations in pp collisions at the LHC"

Buffo A., Vanni M., Marchisio D. L. (2013) "Multivariate Quadrature-Based Moments Methods for turbulent polydisperse gas-liquid systems"

Alberto Tagliaferro (2013) "Nanomechanical and tribological properties of carbon nanotube/polyvinyl butyral composites"

Di Lupo F., Bodoardo S., Gerbaldi C. (2013) "Nanoscale mesoporous SnO2 lithium battery anodes by hard templating synthesis"

Nair J.R., Gerbaldi C., Bongiovanni R. (2013) "Nanoscale microfibrillated cellulose reinforced truly-solid polymer electrolytes for flexible, safe and sustainable lithium-based batteries"

D.L. Marchisio (2013) "Nanospheres and nanocapsules of amphiphilic copolymers constituted by methoxypolyethylene glycol cyanoacrylate and hexadecyl cyanoacrylate units"

S. Ferrero, A. Virga (2013) "Nanostructured silicon carbon thin films grown by plasma enhanced chemical vapour deposition technique"

M. Scalerandi (2013) "Nonlinear elastic response of thermally damaged consolidated granular media"

G.A. Ummarino, Sara Galasso, D. Daghero, M. Tortello, R.S. Gonnelli (2013) "Normal and superconducting properties of LiFeAs explained in the framework of four-band Eliashberg theory"

Murid Hussain, Parveen Akhter, Nunzio Russo, Guido Saracco (2013) "Novel Ti-KIT-6 material for the photocatalytic reduction of carbon dioxide to methane"

Nair J.R., Destro M., Gerbaldi C., Bongiovanni R., Penazzi N. (2013) "Novel multiphase electrode/electrolyte composites for next generation of flexible polymeric Li-ion cells"

Fina A. (2013) "On a novel method to synthesize POSS-based hybrids: An example of the preparation of TPU based system"

Giovanni Barbero (2013) "On the equivalence between specific adsorption and kinetic equation descriptions of the admittance response in electrolytic cells"

Fissore D. (2013) "On the use of Artificial Neural Networks to monitor a pharmaceutical freeze-drying process"

Marco Sangermano (2013) "One-pot photoinduced synthesis of conductive polythiophene-epoxy network"

Alessandro Chiadò, Francesca Bosco, Luca Marmo (2013) "Opening Study on the Development of a New Biosensor for Metal Toxicity Based on Pseudomonas fluorescens Pyoverdine"

Baino F., Ferraris M., Verné E., Vitale-Brovarone C. (2013) "Optimization of composition, structure and mechanical strength of bioactive 3-D glass-ceramic scaffolds for bone substitution"

Palmero P., Montanaro L. (2013) "Optimized Slurries for Spray Drying: Different Approaches to Obtain Homogeneous and Deformable Alumina-Zirconia Granules"

Nair J.R. (2013) "Organic free low temperature direct synthesis of hierarchical protonated layered titanates/anatase TiO2 hollow spheres and their task-specific applications"

Agnello M., Aimo I. (2013) "Performance of the ALICE VZERO system"

Federico Carosio, Jenny Alongi, Giulio Malucelli (2013) "Permeation behavior of Polysulfone membranes modified by fully organic Layer by Layer assemblies"

Andrea Pagnani (2013) "Perturbation Biology: Inferring Signaling Networks in Cellular Systems"

Carosio F. (2013) "Phosphonated Oligoallylamine: Synthesis, Characterization in Water, and Development of Layer by Layer Assembly"

Milanese D., Bonelli B. (2013) "Photodarkening of Infrared Irradiated Yb3+-Doped Alumino-Silicate Glasses: Effect on UV Absorption Bands and Fluorescence Spectra"

M. Sangermano (2013) "Photoluminescent Epoxy/Gd2O3:Eu UV-cured nanocomposites"

E. Tresso, G. Barbero (2013) "Physical description of the impregnation mechanism of dye molecules in contact with porous electrodes"

D. Daghero, M. Tortello, P. Pecchio, R.S. Gonnelli (2013) "Point-contact Andreev-reflection spectroscopy in anisotropic superconductors: the importance of directionality"

A. Gamba (2013) "Polarity, cell division, and out-of-equilibrium dynamics control the growth of epithelial structures"

A. Gamba (2013) "Polymer physics, scaling and heterogeneity in the spatial organisation of chromosomes in the cell nucleus"

E. Padovano, C. Badini, S. Biamino, M. Pavese, P. Fino (2013) "Pressureless sintering of ZrB2–SiC composite laminates using boron and carbon as sintering aids "

E. Descrovi (2013) "Probing losses of dielectric multilayers by means of Bloch surface waves"

Samir Bensaid, Guido Saracco (2013) "Process Design Accompanying Life Cycle Management and Risk Analysis as a Decision Support Tool for Sustainable Biodiesel Production"

Agnello M. (2013) "Pseudorapidity density of charged particles in p+Pb collisions at (s(NN))=5.02 TeV."

Pisano R., Fissore D., Barresi A. A. (2013) "Quality by Design: optimization of a freeze-drying cycle via design space in case of heterogeneous drying behavior and influence of the freezing protocol"

R. Gerbaldo, G. Ghigo, L. Gozzelino (2013) "Quantitative Magneto-Optical Imaging of Supercurrents in Heavy-Ion Irradiated Cuprate and Pnictide Superconductors"

Descrovi E. (2013) "Radiative decay engineering 6: Fluorescence on one-dimensional photonic crystals"

E. Descrovi (2013) "Real-time Amyloid Aggregation Monitoring with a Photonic Crystal-based Approach"

Marco Actis Grande (2013) "Response of the Cr-alloyed PM Steels on Vacuum Sintering and Heat Treatment"

Agnello M. (2013) "Results on Lambda p emission from K- absorption at rest on light nuclei"

G. Barbero (2013) "Role of Van der Waals Interaction on Selective Ion Adsorption in Liquid Crystals"

M. Actis Grande (2013) "Role of microstructural discontinuities in the soft magnetic composites with aluminium alloy addition"

Ferraris S., Vitale-Brovarone C., Vernè E. (2013) "SURFACE FUNCTIONALIZATION OF 3D GLASS-CERAMIC POROUS SCAFFOLDS FOR ENHANCED MINERALIZATION IN VITRO"

Ugues D. (2013) "Scratch resistance of fibre laser surface textured TiN coatings"

Gozzelino L., Ghigo G., Gerbaldo R. (2013) "Screening magnetic fields by superconductors: A simple model"

Agnello M. (2013) "Search for Pentaquark I similar to (+) in Hadronic Reaction at J-PARC"

Agnello M. (2013) "Search for the Theta(+) pentaquark at J-PAR"

Baldassi C., Zecchina R. (2013) "Shape similarity, better than semantic membership, accounts for the structure of visual object representations in a population of monkey inferotemporal neurons"

Antonio Buffo, Daniele L. Marchisio, Marco Vanni (2013) "Simulation of polydisperse multiphase systems using population balances and example application to bubbly flows"

Braunstein A., Pagnani A., Zecchina R. (2013) "Simultaneous Reconstruction of Multiple Signaling Pathways via the Prize-Collecting Steiner Forest Problem"

S. Fiorilli, C.Vitale-Brovarone, B.Onida (2013) "Spray-driedmesoporoussilicaspheresfunctionalized with carboxylicgroups"

Andrea Pagnani (2013) "Stability of the replica symmetric solution in diluted perceptron learning"

Diego Pugliese (2013) "Stokes drift for inertial particles transported by water waves"

Pagliano C., Saracco G., Barber J. (2013) "Structural, functional and auxiliary proteins of photosystem II"

M. Actis Grande, M. Rosso (2013) "Structure Investigation of Ball Milled Composite Powder Based on AlSi5Cu2 Alloy Chips Modified by Sic Particles"

Palmero P., Bonelli B., Montanaro L. (2013) "Surface and mechanical properties of transparent polycrystalline YAG fabricated by SPS"

Francesco Geobaldo (2013) "Surface modification of porous silicon microparticles by sonochemistry"

Di Lupo F., Destro M., Bodoardo S., Gerbaldi C. (2013) "Surfactant-assisted mild hydrothermal synthesis to nanostructured mixed orthophosphates LiMnyFe1-yPO4/C lithium insertion cathode materials"

Amici J., Sangermano M. (2013) "Synthesis of H-Shaped Complex Macromolecular Structures by Combination of Atom Transfer Radical Polymerization, Photoinduced Radical Coupling, Ring-Opening Polymerization, and Iniferter Processes"

Alberto Fina (2013) "Synthesis of silane functionalized sodium titanate nanotubes and their influence on thermal and mechanical properties of epoxy nanocomposite"

Marco Sangermano (2013) "Synthesis of the fluorene spiroorthocarbonate and the evaluation of its antishrinkage activity in the cationic photopolymerization of an epoxy resin"

Iazzi F., Lavagno A. (2013) "Technical design report for the PANDA (AntiProton Annihilations at Darmstadt) Straw Tube Tracker"

Giovanni Barbero (2013) "The Kramers–Kronig relations for usual and anomalous Poisson–Nernst–Planck models"

R.S. Gonnelli, M. Tortello, D. Daghero, P. Pecchio, S. Galasso (2013) "The Order-Parameter Symmetry and Fermi Surface Topology of 122 Fe-Based Superconductors: A Point-Contact Andreev-Reflection Study"

Rosso M., Actis Grande M. (2013) "The effect of "GASCARBUSINT" on tensile properties of sintered steels"

Claudio Borile (2013) "The effect of quenched disorder in neutral theories"

Montanaro L., Palmero P., Lombardi M. (2013) "Thermal analyses applied to ceramic nanopowders: from synthesis to sintering. A review on transition alumina powder-based materials"

Smeacetto F., Salvo M. (2013) "Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h"

Alongi J., Carosio F., Malucelli G. (2013) "Thermal stability and flame retardancy of polyester fabrics sol-gel treated in the presence of boehmite nanoparticles"

Giulio Malucelli, Jenny Alongi (2013) "Thermal, rheological and barrier properties of waterborne acrylic nanocomposite coatings based on boehmite or organo-modified montmorillonite"

S. Biamino, E. Padovano, M. Pavese, P. Fino, C. Badini (2013) "Thermophysical Properties of Short Carbon Fiber/SiC Multilayer Composites Prepared by Tape Casting and Pressureless Sintering"

G. Barbero (2013) "Thickness dependence of the anchoring energy of a nematic cell"

Battista F., Ruggeri B., Fino D. (2013) "Toward the scale-up of agro-food feed mixture for biogas production"

Agnello M. (2013) "Transverse Momentum Distribution and Nuclear Modification Factor of Charged Particles in p plus Pb Collisions at root(NN)-N-s=5.02 TeV"

M. Sangermano, S. Marchi (2013) "UV-activated hydrosilation reaction for silicone polymer crosslinking"

M. Sangermano (2013) "UV-cured epoxy-ZnO composites: preparation and characterization"

Marco Sangermano, Paolo Allia (2013) "UV-cured transparent magnetic polymer nanocomposites"

M. Sangermano, S. Marchi (2013) "UV-induced frontal polymerization of a Pt-Catalyzed hydrosilation reaction"

M. Sangermano (2013) "Visible light polymerization of epoxy monomers using an iodonium salt with camphorquinone/ethyl-4-dimethyl aminobenzoate"

Luca Dall'Asta (2013) "Voter models with conserved dynamics"

Bella F. (2013) "Waste Cleaning Waste: Photodegradation of Monochlorophenols in the Presence of Waste-Derived Photosensitizer"

Bongiovanni R., Marchi S. (2013) "Water resistance improvement of filter paper by UV-grafting modification with a fluoromonomer."