IL PORTALE per la RICERCA dei DIPARTIMENTI

A.Frache, F. Carosio, D. Battegazzore (2013) "A CLASSIFICATION OF BIOPOLYMER AND BIOCOMPOSITES IN TERMS OF FLAME RETARDANCY"

D. Hidalgo, S. Stassi, F. Pirri (2013) "A Low complexity wireless microbial fuel cell monitor using piezoresistive sensors and impulse-radio ultra-wide-band"

M. Morello (2013) "A Low-Power Read-Out Circuit and Low-Cost Assembly of Nanosensors onto a 0.13 µm CMOS Micro-for-Nano Chip"

N. Celadon (2013) "A Wireless Address-Event Representation System for ATC-Based Multi-Channel Force Wireless Transmission"

Amjad U., Specchia S. (2013) "A comparative study on hydrogen production from steam and oxidative steam reforming of methane: optimal operative conditions and influence of noble metal catalysts"

Bella F., Nair J.R., Pugliese D., Gerbaldi C., Bongiovanni R. (2013) "Acrylic and methacrylic polymer electrolytes for dye-sensitized solar cells prepared by an elegant and rapid UV-curing process"

Matteo Pavese, Paolo Fino, Sara Biamino, Claudio Badini, Elisa Padovano (2013) "Aluminosilicates Assisted Pressureless Sintering of Sialon Ceramics"

C. Ramella (2013) "Assessment of silver nanoparticle inkjet-printed microstrip lines for RF and microwave applications2013 IEEE International Wireless Symposium (IWS)"

C. Ramella (2013) "Bandwidth extension of GaN Doherty power amplifier: Effect on power, efficiency and linearity"

Baino F, Vitale-Brovarone C (2013) "Bioactive glass coatings on Al2O3-ZrO2 composite substrates by laser cladding for orthopaedic applications"

Grassini, Angelini, Fulginiti (2013) "Biodegradable metallic materials: A measuring approach to predict the corrosion rate"

J. Alongi, F. Carosio, F. Bosco, G. Malucelli (2013) "Biomacromolecules as novel green flame retardants for cotton fabrics"

Bensaid S., Pirone R., Russo N., Fino D. (2013) "CeO2 catalysts with fibrous morphology for soot oxidation: the importance of the soot-catalyst contact"

Gerbaldo R., Ghigo G., Gozzelino L. (2013) "Characterization of charged domain walls in Bi doped iron garnets for contactless manipulation of magnetic microparticles"

Hidalgo D., Ruggeri B. (2013) "Chemical pre-treatment of commercial carbon felt used as anode of Microbial Fuel Cells"

Actis Grande G., Rovero G., Sicardi S. (2013) "Comparative ozone decolouration in bubble column and in ejector mixer units"

Periolatto M., Ferrero F. (2013) "Cotton Filter Fabrics Functionalization by Chitosan UV-grafting for Removal of Dyes"

Darabnia B., Demichela M. (2013) "Data field for decision making in maintenance optimization: An opportunity for energy saving"

Piumetti M., Armandi M., Bonelli B. (2013) "Degradation of Acid Orange 7 by transition metals containing mesoporous titania in the presence of H2O2 and ascorbic acid"

Hidalgo D. H., Fontana M., Saracco G., Pirri C. F. (2013) "Deposition of polyaniline in TiO2 mesoporous films and its use as sensitizer for photocatalytic water splitting"

Bosca S., Barresi A.A., Fissore D. (2013) "Design of a robust soft-sensor to monitor in-line a freeze-drying process"

A.S. Gliozzi, M. Scalerandi (2013) "Detection of damage due to salt crystallization through the Scaling Subtraction Method"

Ferri A. (2013) "Different approaches for the production of antibacterial textiles"

Daniele Battegazzore, Alberto Frache (2013) "Eco friendly composites for packaging"

Giansetti M., Actis Grande G., Pezzin A., Rovero G., Sicardi S. (2013) "Evaluation of actual dyestuff penetration in ultrasonic-assisted wool dyeing"

Balestra F., Iazzi F., Lavagno A. (2013) "Experiment FIRST: Fragmentation of 12C Beam at 400 MeV/u "

P. Matteis, G. Scavino, D. Firrao (2013) "Fatigue endurance of new high-strength car-body steels"

Stefano Stassi (2013) "Functionalized single ZnO-metal junction as a pH sensor"

Giulio Malucelli (2013) "High speed friction and wear measurements on innovative polymeric materials for sliding elements in reciprocating compressors"

Demichela M. (2013) "Human factor analysis embedded in risk assessment of industrial machines: Effects on the safety integrity level"

N. Di Pasquale1, D. L. Marchisio, A. A. Barresi (2013) "Implementation of population balance models in Computational Fluid Dynamics codes and coupling with Molecular Dynamics"

Bosca S., Barresi A.A., Fissore D. (2013) "In-line design and optimization of a pharmaceutical freeze-drying process."

Alongi J., Carosio F., Malucelli G. (2013) "Innovative Solutions To Enhance The Flame Retardancy Properties Of Natural And Synthetic Fabrics: Sol-Gel, Dual-Cure Processes And Layer By Layer Assembly"

Sabrina Grassini (2013) "Integrated measuring approach for the study of corrosion mechanisms"

Oddone I., Pisano R., Barresi A. A. (2013) "Intensification of the freeze drying process by the control of both freezing and primary drying steps"

De Benedetti B., Tecchio P., Rollino S. (2013) "Life Cycle Assessment of sustainable home gateways and product category rules definition for environmental labeling"

Bella F., Tresso E., Pirri C.F., Bongiovanni R. (2013) "Light cured polymer electrolytes for dye-sensitized solar cells with unconventional redox couples"

Darabnia B., Demichela M. (2013) "Maintenance an opportunity for energy saving"

Lamberti A., Pugliese D., Bella F., Tresso E., Pirri C. F. (2013) "Metal oxide nanostructures for the fabrication of efficient DSC photoanodes"

M. Giorcelli, A. Tagliaferro (2013) "Microwave Absorbing Properties of Multi Walled Carbon Nanotubes"

M. Giorcelli, A. Tagliaferro (2013) "Microwave Absorption Properties in Epoxy Resin Multi Walled Carbon Nanotubes Composites"

Bernardo Ruggeri (2013) "Modeling and Parameter Estimation in Biofuel Discontinuous Production by Hydrogen Forming Bacteria (HFB)"

Giansetti M., Pezzin A., Sicardi S., Rovero G. (2013) "Modelling of the Wool Textile Finishing Processes"

Pugliese D., Lamberti A., Bella F. (2013) "Moltipod-like zinc oxide nanostructures as photoanodes in Dye-sensitized Solar Cells"

Daniele Battegazzore, Jenny Alongi, Alberto Frache (2013) "NATURAL FILLERS FOR THE PREPARATION OF BIOCOMPOSITES WITH ENHANCED PERFORMANCES"

F. Smeacetto, A. De Miranda, M. Salvo, M. Ferraris (2013) "NOVEL GLASS-CERAMIC COMPOSITIONS FOR APPLICATION AS SEALANTS FOR SOLID OXIDE FUEL CELLS AND SOLID OXIDE ELECTROLYSIS CELLS "

Castillo Marcano S. J., Bensaid S., Russo N., Fino D. (2013) "Nanolubricants for diesel engines: compatibility with the after-treatment catalysts"

Roberto Gerbaldo, Gianluca Ghigo, Laura Gozzelino (2013) "Nanostructuring superconductors by ion beams: A path towards materials engineering"

Boetti N.G., Mura E., Scarpignato G.C., Milanese D. (2013) "Nd3+ Doped Phosphate Glass Optical Fibre Lasers"

Mura E., Boetti N.G., Milanese D. (2013) "New Developments in Tellurite Glass Fibers"

Monteverde Videla A.H.A., Specchia S. (2013) "Non-noble electrocatalysts supported on carbon nano-networks for oxygen reduction reaction"

Akhter P., Hussain M., Russo N., Saracco G. (2013) "Novel mesoporous silica incorporated isolated Ti for photocatalytic reduction of CO2 to CH4"

Andrianopoli L., Gallerati A., Trigiante M. (2013) "On D=4 Stationary Black Holes"

Laura Andrianopoli (2013) "On the Classification of Two Center Orbits for Magical Black HolesSupersymmetric Gravity and Black Holes"

Hidalgo D., Pirri C. F., Saracco G. (2013) "One Dimensional Core-Shell ZnO/TiO2 Nanowire Arrays for Visible Light Driven Photoelectrochemical Water Splitting"

Thalluri S. M., Vankova S., Russo N., Saracco G. (2013) "Optimization of dip-coating procedure aiming towards an efficient BiVO4 photoanode"

Milanese D. (2013) "Photodarkening in Yb/Al/Ce Optical Fibers: Study of Photoinduced Defects by Electron Paramagnetic Resonance"

Milanese D. (2013) "Photodarkening mitigation in Yb-doped fiber lasers by 405 nm irradiation"

Bella F., Gerbaldi C., Pugliese D., Nair J.R., Bongiovanni R. (2013) "Photoelectrochemical characterization of UV-crosslinked polymer electrolytes with non-conventional additives: towards efficient and durable quasi-solid DSSCs"

Vitale A., Bongiovanni R. (2013) "Photopolymerization of acrylic oligomers and photolithographic processes for the fabrication of microfluidic devices"

Bella F., Pugliese D., Nair J.R., Gerbaldi C., Bongiovanni R. (2013) "Polymer electrolyte membranes for dye-sensitized solar cells prepared by an elegant and rapid UV-curing process"

Zelenková T., Fissore D., Barresi A.A (2013) "Preservation of poly-e-caprolactone nanoparticles using freeze-drying with aqueous and non-aqueous systems."

J.M.C. Tulliani (2013) "Production and mechanical behavior of micro-encapsulated self-healing cement: a case study"

De Benedetti B., Tecchio P., Rollino S. (2013) "Quantified innovation in ICT: Life Cycle Assessment approach applied to two generations of home gateways"

Mura E., Scarpignato G.C., Boetti N.G, Milanese D. (2013) "Rare-Earth Doped Phosphate Glass Fibers"

Alongi J., Malucelli G. (2013) "SOL-GEL treatments for enhancing flame retardancy of cotton: state of art and perspectives"

Coletto M.M., Barresi A.A., Marchisio D.L., Curti M. (2013) "Segregation of binary mixtures in atmospheric freeze drying of food"

Antonio Buffo, Daniele L. Marchisio, Marco Vanni (2013) "Simulation of coalescence, break up and mass transfer in bubble columns by using the Conditional Quadrature Method of Moments in OpenFOAM"

G. Malucelli (2013) "Sol-gel and layer by layer treatments for enhancing flame retardancy of textiles"

Alongi J., Malucelli G. (2013) "Sol-gel treatments for improving thermal stability and flame retardancy of textiles: an overview"

Altarelli F., Braunstein A., Dall'Asta L., Zecchina R. (2013) "Stochastic Optimization of Service Provision with Selfish Users"

P. Matteis, G. Scavino (2013) "Strength and fracture of TWIP steel dissimilar weld joints"

Matteo Pavese, Daniele Ugues, Andrea Giuseppe Pisa, Sara Biamino, Paolo Fino, Claudio Francesco Badini (2013) "Study of Micro hardness, Roughness, Wear and Corrosion Behaviour of Ni/CNT and Ni/GNP Composite Coatings Produced by Electrodeposition"

Marchisio D.L., Barresi A.A. (2013) "Supporting the transfer of products between different equipment through latent variable model inversion"

Zhang X., Ferraris S., Verne E., Venturello A. (2013) "Surface functionalization of bioactive and ferrimagnetic glass-ceramics (SC45) with gallic acid and folic acid"

Spriano S., Ferraris S. (2013) "Surface modification and functionalization of commercially pure titanium for enhanced bone integration"

Alongi J., Malucelli G. (2013) "Synthesis and characterization of hybrid phosphorus-silica films for halogen-free flame retardant cotton fabrics"

Pagliolico S. (2013) "TIERRA CRUDA, PROYECTOS DE DIFUSIÓN Y TRANSFERENCIA TECNOLÓGICA PARA CONTEXTOS DE EMERGENCIA"

Carosio F., Alongi J., Malucelli G. (2013) "Textile flame retardancy through layer by layer assembled nanoarchitectures"

Demichela M., Pilone E. (2013) "The impact of local regulations on land use planning for seveso sites: SMEs perspective"

Balestra F., Gallio G., Iazzi F., Lavagno A. (2013) "The internal diamond target for the hypernuclear physics at HESR"

F. Bosco, J. Alongi, L. Marmo, G. Malucelli (2013) "Thermal stability and flame resistance of cotton fabrics treated with whey proteins"

M. Piumetti, M. Armandi, F. Geobaldo, B. Bonelli (2013) "Transition metals containing mesoporous titania prepared by direct synthesis"

G. Malucelli, M. Actis Grande (2013) "Tribology of PTFE-based polymeric materials: comparison between pin-on-disc and sliding tests"

Sangermano M., Vitale A. (2013) "UV-reduced graphene oxide nanocomposites"

Demichela M. (2013) "Vulnerability assessment for human targets due to ash fallout from Mt. Etna"

MIGLIAVACCA G., FERRERO F., PERIOLATTO M. (2013) "WOOL FABRICS DYEING WITH METAL-COMPLEX DYES AFTER UV IRRADIATION"

Giansetti M., Actis Grande G., Rovero G., Sicardi S. (2013) "Washing intensification by ultrasounds"

Stefano Stassi, Candido Fabrizio Pirri (2013) "Wearable and flexible pedobarographic insole for continuous pressure monitoring"

M. Giorcelli, A. Tagliaferro (2013) "Wide Band Microwave Characterization of MWCNTS/Epoxy Composites"

M. Giorcelli, A. Tagliaferro (2013) "Wide band Microwave Characterization of MWCNTs/Epoxy Composites"

Mura E., Scarpignato G. C., Boetti N. G., Milanese D. (2013) "Yb-doped phosphate double-cladding optical fiber laser for high-power applications"

Specchia V., Specchia S. (2013) "“zero km med-wastes”: smart collection, sterilization and energetic valorisation"

Amjad U., Specchia S. (2013) "A comparative study on steam and oxidative steam reforming of methane with noble metal catalysts "

Zelenkova T., Marchisio D., Barresi A., Ferri A. (2013) "Application of micro/nanocapsules to improve biomedical textile comfort"

Ramella C (2013) "Assessment of silver nanoparticle inkjet-printed microstrip lines for RF and microwave applications"

Ramella C (2013) "Bandwidth extension of GaN Doherty power amplifier: effect on power, efficiency and linearity"

F. Baino, C. Vitale-Brovarone (2013) "Bioactive glass-ceramic coatings and structures on Al2O3-ZrO2 composite substrates by laser cladding for orthopaedic applications"

Baino F., Vitale-Brovarone C. (2013) "Composite Scaffolds to Model Aging Bone Tissue"

S. Specchia (2013) "DURAMET: improved durability and cost-effective components for new generation solid polymer electrolyte direct methanol fuel cells"

Mura E., Boetti N.G., Milanese D. (2013) "Dehydration study on phosphate glasses for optical fibers"

Scarpignato G.C., Mura E., Boetti N.G., Milanese D. (2013) "Design curves based optimization and fabrication of a high gain Yb-Er co-doped optical amplifier based on phosphate glasses"

Marchisio D. (2013) "Extension of Darcy-Forchheimer law to shear thinning fluids by CFD pore-scale simulations"

JAGDALE P (2013) "FUNCTIONAL CARBON NANOWALLS BY MICROWAVE PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION. THE CASE OF TEMPLATES FOR BISMUTH NANOPARTICLES GROWTH."

Ashraf M.A., Ercolino G., Vasile N.S., Specchia S., Specchia V. (2013) "Final step for CO syngas clean-up: comparison between CO-PROX and CO-SMET processes"

Bella F., Bongiovanni R. (2013) "Free-radical photopolymerization of acrylic/methacrylic polymer electrolyte membranes for dye-sensitized solar cells"

Specchia S. (2013) "Fuel processing activities at European level: a panoramic overview"

F. Baino, C. Vitale-Brovarone (2013) "Glass-ceramic scaffolds coated by bioartificial blends to model aging bone tissue"

A.H.A. Monteverde Videla, S. Specchia (2013) "Graphene-supported non-noble metal electrocatalysts for PEMFC oxygen reduction reaction"

JAGDALE P (2013) "Growth of Nano-sized Bismuth Oxychloride on Carbon Nanotube carpet by Metal-Organic Vapour Deposition Method."

G. Cristiano, S. Specchia (2013) "Hydrogen production via steam reforming on Ru/¿-Al2O3 deposited over different structured supports "

Diego Pugliese, Andrea Lamberti, Elena Tresso (2013) "Impact of sensitizer kinetics on the small-signal characteristics of dye-sensitized solar cells"

Specchia S. (2013) "Improved durability and cost-effective components for new generation solid polymer electrolyte direct methanol fuel cells"

Barresi A.A. (2013) "Intensification in freeze-drying of pharmaceutical products"

F. Baino, E. Verné, C. Vitale-Brovarone (2013) "Manufacturing and characterization of innovative glass coatings on ceramic substrates for prosthetic applications"

Lamberti A., Bella F., Pugliese D., Bongiovanni R., Tresso E. (2013) "Metal oxide nanostructures and quasi-solid electrolytes for dye-sensitized solar cells"

F. Baino, C. Vitale-Brovarone (2013) "Models and biomaterials for ageing bone tissue regeneration"

F. Baino, C. Vitale-Brovarone (2013) "Models for tensile and compressive strength of 3-D porous bioceramic scaffolds"

Daniele Marchisio (2013) "Moment-based methods to solve PBEs and their contribution to the growth of population balance modeling"

M. Ferraris, S. Perero, S. Ferraris, F. Baino, C. Balagna, E. Verné (2013) "Multi-purpose antibacterial coatings: sputtered silver nanoclusters-silica composite layers"

Monteverde Videla A.H.A., Specchia S. (2013) "Non noble electrocatalysts supported on graphene sheets for oxygen reduction reaction"

Monteverde Videla A.H.A., Specchia S. (2013) "Non-noble metal Fe-Nx electrocatalysts supported on interconnected carbon nanotubes for the oxygen reduction reaction"

Bella F., Nair J.R., Gerbaldi C., Bongiovanni R. (2013) "Novel cellulose-based composite gel-polymer electrolytes for green, efficient and durable dye-sensitized solar cells"

F. Baino, C. Vitale-Brovarone (2013) "Optimization of glass-ceramic scaffolds for bone repair: 3D architecture, mechanical strength and quantification of in vitro bioactivity by X-ray micro-CT"

JAGDALE P (2013) "PATTERNED GROWTH OF CARBON NANO TUBE PILLARS BY CHEMICAL VAPOUR DEPOSITION"

Vitale A. (2013) "Perfluoropolyether-based materials: A new generation of polyelectrolytes for battery applications"

Milanese D., Pavese M., Virga A., Giorgis F. (2013) "Photodarkening in Yb-doped fibres for high power lasers: investigation of structural changes within the EU project "LIFT""

Milanese D., Bonelli B. (2013) "Photodarkening in optical fibres: comparative study of photo-induced defects using different photon sources"

Vitale A., Marasso S., Pirri C.F., Bongiovanni R. (2013) "Photolithographic approach to fabricate PFPE microfluidic devices"

Vitale A., Bongiovanni R. (2013) "Photopolymerization of acrylic oligomers and photolithographic processes for the fabrication of microfluidic devices"

Vitale A., Pirri C.F., Bongiovanni R. (2013) "Photopolymerization of fluorinated acrylic oligomers and photolithographic processes for the fabrication of microfluidic devices"

JAGDALE P (2013) "Piezoresistive properties of CNT-based polymeric matrix nanocomposites for sensor applications"

Bodoardo S., Nair J.R., Gerbaldi C., Francia C., Destro M., Di Lupo F., Bella F., Zanarini S., Casino S., Zeng J., et al. (2013) "Polymer electrolytes for safe Lithium ion, electrochromic and photovoltaic applications"

Marchisio D. (2013) "Pore scale simulation of micro and nanoscale zerovalent iron particles transport"

Boccardo G., Marchisio D. (2013) "Pore-scale investigation of flow in saturated and unsaturated media: computational tools and upscaling"

Bertone E., Venturello A., Geobaldo F. (2013) "Prediction of the optimum harvest time of ‘Scarlet’ apples using DR-UV–Vis and NIR spectroscopy"

Marchisio D.L. (2013) "Quadrature-based moment methods for the simulation of turbulent polydisperse multiphase systems"

C. Vitale-Brovarone (2013) "Resorbable glass hollow fibres - hydrogel systems for the controlled release of neurotrophic factors"

F. Baino (2013) "Rivestimenti antibatterici su dispositivi per implantologia oculare"

JAGDALE P (2013) "Role of Carbon Nano Tube Reinforcement Epoxy Based Nano-composites for mechanical properties"

Boccardo G., Marchisio D.L. (2013) "SIMULATION OF FLOW AND PARTICLE TRANSPORT AND DEPOSITION IN POROUS MEDIA WITH COMPUTATIONAL FLUID DYNAMICS"

F. Baino, E. Verné, C. Vitale-Brovarone (2013) "Smart glass-derived coatings to improve the osteointegration of ceramic prosthetic devices"

bensaid S, Russo N, Fino N (2013) "Soot Combustion Improvement in Diesel Particulate Filters Catalyzed with Ceria Nanofibers"

C. Vitale-Brovarone, D. Milanese (2013) "Study of phosphate glass fibres for peripheral nerve regeneration and drug release"

Cristiano G., Specchia S., Specchia V. (2013) "Syngas production by methane oxy-steam reforming: performance of supported metal (Rh, Pt, Ru, Ni) layered on monoliths"

JAGDALE P (2013) "Thermal properties of functionalized carbon nanotubes-polymer composites"

Bongiovanni R., Bella F. (2013) "Thermoset membranes as electrolytes for Dye Sensitized Solar Cells"

Pagliano C., Saracco G., Barber J. (2013) "Three-dimensional structure determination and mass spectrometric characterization of PSII-LHCII supercomplexes from higher plants"

Pisano R., Fissore D., Barresi A. A. (2013) "Toward full noninvasive monitoring of a freeze-drying process"

Andrea Lamberti, Matteo Gerosa, Diego Pugliese, Elena Tresso (2013) "Towards quasi-solid state Dye-sensitized Solar Cells: effect of Al2O3 nanoparticle inclusion in liquid electrolyte"

C. Vitale-Brovarone, F. Baino, E. Verné (2013) "Trabecular-like glass-ceramic coatings on prosthetic devices: a valuable tool to promote osteointegration"

Zelenkova T., Barresi A., Marchisio D. (2013) "Transferring the manufacturing of a pharmaceutical nanoparticle product between different plants"

Vitale A., Bongiovanni R. (2013) "Undercuring and oxygen inhibition as strategies for bonding and patterning fluorinated photopolymers"

Fissore D. (2013) "Using soft-sensors to get Quality-by-Design and to optimize a freeze-drying cycle in-line."

Bertone E., Venturello A., Geobaldo F. (2013) "Washed Arabica, Natural Arabica and Robusta coffee non-destructive discrimination using FT-NIR spectroscopy"

Bella F., Bongiovanni R. (2013) "A 4.41% sunlight conversion efficiency obtained with a polymer electrolyte prepared in just seven minutes"

Bella F., Bongiovanni R. (2013) "A highly efficient quasi-solid polymer electrolyte for dye-sensitized solar cells prepared in only 7 minutes"

Lamberti A., Bella F., Stassi S., Lombardi M., Pirri C.F. (2013) "BaTiO3 nanotube arrays by hydrothermal conversion of TiO2 nanotube carpets grown by anodic oxidation"

Gerbaldo R., Verne E. (2013) "Bioactive and Ferrimagnetic Bone Cements for hyperthermia applications"

C. Vitale-Brovarone, F. Baino, E. Verné, P. Perdika (2013) "Bioactive trabecular-like coatings to improve the osteointegration of ceramic prosthetic devices "

bensaid samir, Russo Nunzio, Fino Debora (2013) "CeO2 structured catalysts with fibrous morphology for soot oxidation: the importance of the soot-catalyst contact conditions"

Gerbaldo R., Verne E. (2013) "Development of PMMA bone cement loaded with a ferrimagnetic bioactive glass ceramic for hypethermia treatment"

Porcarelli L., Nair J.R., Bella F., Gerbaldi C., Penazzi N. (2013) "Development of multipurpose PEO-based polymer electrolytes for smart and energy efficient devices"

Nair J. R., Bella F., Gerbaldi C. (2013) "Development of multipurpose ethylene oxide based polymer electrolytes for smart and energy efficient devices"

Stefano Sapienza (2013) "EXG: a simultaneous EMG and EEG recording to study movements from the genesis into the brain to the actuation in the muscle"

Carosio F., Alongi J., Malucelli G. (2013) "Flame Retardancy through Layer by Layer assembly"

Diego Pugliese, Francesca Risplendi, Giancarlo Cicero, Andrea Lamberti, Elena Tresso (2013) "Hemisquaraine Dye Performance on Different Photoanodes"

J. Alongi, g. Malucelli (2013) "In-situ crosslinking of anionic polyamide 6 (APA 6): effect of kinetic parameters on degree of crosslinking, thermal properties and rheological behaviour"

Pezzin A., Giansetti M., Ferri A. (2013) "Influence of Limescale on Heating Elements Efficiency"

Ferraris S., Vernè E. (2013) "Magnetic nanoparticles for cancer treatment"

Hidalgo D., Mazzarino I., Ruggeri B. (2013) "Marine Microbial Fuel Cells (MMFC) as remote power generator"

Bertone E., Venturello A., Geobaldo F. (2013) "Monitoring Harvesting degree of red ‘Scarlet’ Apples using DR-UV–Vis and NIR Spectroscopy"

Alessandro Virga, Andrea Lamberti, Diego Pugliese, Candido Fabrizio Pirri (2013) "Morphological and chemico-physical study of dye-sensitized solar cell counter electrode degradation"

Marchisio D. (2013) "Multi-scale simulation and Bayesian inversion of advection-diffusion-reaction equation in porous media"

Bella F., Gerbaldi C., Nair J.R., Bongiovanni R. (2013) "Nanoscale microfibrillated cellulose reinforced polymer electrolytees for sustainable energy devices"

Verne E. (2013) "New PMMA bone cement added with ferrimagnetic bioactive glass for hyperthermia treatment "

Frache A. (2013) "On the first steps of EVA-layered silicates nanocomposites thermal degradation: structure rearrangement and charring products formation"

Vitale A., Bongiovanni R. (2013) "Perfluoropolyether thin coatings for silicon wafers"

Vitale A., Pirri C.F., Bongiovanni R. (2013) "Photolithographic approach to fabricate PFPE microfluidic devices"

Bella F., Bongiovanni R. (2013) "Photopolymerization of acrylic/methacrylic polymer electrolyte membranes for dye-sensitized solar cells: effect of crosslinking density and addition of iodine salts"

Ferraris S., Zhang X., Vernè E. (2013) "Polyphenols grafting to bioactive glasses and glass-ceramics"

Marchisio D. (2013) "Pore-scale simulation and hydrodynamic dispersion estimation in realistic porous media"

Marchisio D. (2013) "Pore-scale simulation and upscaling of flow, transport and wetting in porous media"

Ferri A. (2013) "Preliminary results on cyclodextrin nanosponge/dye inclusion complex"

Vitale A., Bongiovanni R. (2013) "Siloxane photopolymers as PCR compatible and patternable materials"

Vitale A., Bongiovanni R. (2013) "Siloxane-based UV-cured coatings"

Hidalgo D., Ruggeri B. (2013) "Streamlining of commercial berl saddles: new material to improve the performance of Microbial Fuel Cells"

J. Alongi, G. Malucelli (2013) "Synthesis and characterization of graphene-based polymer nanocomposites with potential use for biomedical applications"

Bosco F., Alongi J., Marmo L., Malucelli G. (2013) "Thermal stability and flame resistance of cotton fabrics treated with whey proteins"

Vitale A., Bongiovanni R. (2013) "Ultra-thin films based on random copolymers containing perfluoropolyether side chains"

Bella F. (2013) "Use of soluble bio-based substances isolated from urban biowastes as organic photocatalysts for the degradation of 4-chlorophenol"

MIGLIAVACCA G., PERIOLATTO M., FERRERO F. (2013) "WOOL FABRIC DYEING WITH ACID DYE AFTER UV IRRADIATION"

Pugliese D., Lamberti A., Bella F. (2013) "ZnO multipod nanostructures for Dye-sensitized Solar Cell application"

Pugliese D., Lamberti A., Bella F., Tresso E. (2013) "ZnO multipods as promising nanostructured photoanodes for Dye-sensitized Solar Cell"